laitimes

How to detect the Lorda 1562M chip with software? Yuehu 1562M, Peppa Pig 1562M?

author:Wu Jiang Quan Zhilong
How to detect the Lorda 1562M chip with software? Yuehu 1562M, Peppa Pig 1562M?

PS: This article is only for the second generation Yuehu 1562M, if you want to detect 1562A, please jump to an article written before.

How to detect Huaqiangbei AirPods? How does AB1562UT detect the Lorda 1562A chip? Read this and it's over492 Agree · 53 Review articles

How to detect the Lorda 1562M chip with software? Yuehu 1562M, Peppa Pig 1562M?

Yuehu II is relatively easy to distinguish, so it can basically be solved with software. However, it should be noted in advance that the current monitoring is only for Android phone users (including below), because Apple's detection software relies on TestFlight, and the test quota of the software is full, so it cannot be installed. The following is the main part.

1. Install AB1562_UT.apk, the latest version is V_1.2.2, the download link is as follows:

Baidu on your own

2. Click the [Connect Device] button, select your own headset device and click [Connect Headset]. Note that the non-Lorda chip cannot be connected.

How to detect the Lorda 1562M chip with software? Yuehu 1562M, Peppa Pig 1562M?

Click (1) to select the device, pop-up window to select your own headphones, the screenshot is as follows:

How to detect the Lorda 1562M chip with software? Yuehu 1562M, Peppa Pig 1562M?

Click (2) to connect the headphones, if you can't connect to the software, it proves that it is not a Roda chip. This software is used by the Roda chip to upgrade the firmware, and there is no merchant so-called that the latest model cannot be connected to the software, which is equivalent to the mother does not know the son.

3. Select [MCSYNC FOTA UT] binaural upgrade mode

How to detect the Lorda 1562M chip with software? Yuehu 1562M, Peppa Pig 1562M?

4. Explanation of main information.

How to detect the Lorda 1562M chip with software? Yuehu 1562M, Peppa Pig 1562M?
  1. The first box: must be showing 4M.
  2. The second box: indicates the left and right earphone jumping situation, which is normally a 1:1 pair.
  3. Third box: Displays the logo of Airoha_S23 or S23cc or S23_cc pro. As for why do three show A results? Mainly related to the firmware version of the headset, before version 35 all show S23cc, while versions 35 and 38 display Airoha S23, and after version 40 show S23_cc pro.
  4. The fourth box: firmware version, the screenshot above is the Yuehu motherboard 1562M chip, the current mainstream is 32, 35, 38, 40, 144. Those less than 32 are old versions, and the headset version can be upgraded by flashing the firmware, which is equivalent to the mobile phone system update bug. Since the Yuehu motherboard is mentioned, there must be other motherboards, see the supplementary part.

5. Supplementary instructions

As shown in the figure above, on the whole, the second generation is still relatively easy to distinguish, as long as you pay attention to the firmware version not lower than 35.

But some friends said, why don't you have a firmware version, showing V1.1.1.1 and the like, is it a fake 1562M?

How to detect the Lorda 1562M chip with software? Yuehu 1562M, Peppa Pig 1562M?

V1.1.1.1 - Ictronics - Peppa Pig

In fact, no, 1562M chip, there are currently two kinds: one is Yuehu motherboard, and the other is Actronics motherboard.

Software detection shows that most of the headphones of V1.1.1.1 are from the motherboard of Actronics, but there are also a small number of motherboards of Yuehu.

WC? Yuehu also shows V1.1.1.1? The more you know, the more you don't know...

So how can this judge whether it is Ictronic or Yuehu's!

PS: Tronics motherboard, this kind of commonly known as Peppa Pig version.

yes, as for how to tell the difference? In fact, the distinction can not only look at the software, but also from the software detection + flashing:

1. Software detection angle

The software angle is very simple, if it is the screenshot I sent http://V130.1.1.XXX this format at the top, it must be the Yuehu motherboard, and the latter does not need to be seen. If it is to display V1.1.1.1, then you have to look at the proxy date Release Date, if it is displayed in the format 202X/3/9, then it is Ictronix~, for example, the following is Ictronix:

How to detect the Lorda 1562M chip with software? Yuehu 1562M, Peppa Pig 1562M?

Actronics-Peppa Pig

Instead of displaying the format 202X/3/9, display a specific date, such as the following:

How to detect the Lorda 1562M chip with software? Yuehu 1562M, Peppa Pig 1562M?

So far (2021/03/13), it can be concluded with a high probability that it is Yuehu motherboard. As for whether it is a Yuehu motherboard, this needs another angle, brush the firmware ~

2. Firmware flashing angle

I don't recommend flashing the firmware, in fact, seeing this, it is estimated that everyone does not know much, or is a little confused, why distinguish between Yuehu or Ictronics (piglet version)? And what is the difference between the display V1.1.1 and the display V130.1.1.XX in the Yuehu version?

yes, what's the difference? Or which is better? I believe this is what everyone is more curious about...

How to say, each has its own pros and cons, in fact, there are many reviews on the Internet Peppa Pig and Yuehu (no serial number).

That is, the first two of the screenshot below, the third Yuehu has a serial number version everyone ignore first, look at the first two:

How to detect the Lorda 1562M chip with software? Yuehu 1562M, Peppa Pig 1562M?

PS: Add the price, 1562M will not be higher than 150, look at the group of dog shi bloggers, bring the goods, but also the whole is particularly obscure, say what they go to the stall to bring goods to their own delivery (also indicate that this is the reason for slow delivery), what is the price of headphones, how much to sell, do you have no points.

As can be seen from the first two, Peppa Pig and Yuehu are different from serial numbers and voice siri.

Peppa Pig Edition: The problem with serial number + voice Siri is that if you are an Apple user, it will automatically jump Siri from time to time, especially on iOS 14. The reason for this problem is the addition of "about the serial number of the machine", the chip scheme and the mobile phone conflict, so this automatic jump Siri phenomenon, but not 100% appeared.

At first, the Yuehu version of 1562M did not try to flash the firmware with the serial number, but it also jumped Siri, and if you connect another phone, the serial number will disappear. You can only reflash the firmware.

And now Yuehu has launched a serial number and voice Siri, compared to no serial number, except for a little lower standby, everything else is the same. But prices have risen. That is, the ~ that everyone displays V1.1.1.1 on the software detection

So this also makes up for the problem that Yuehu has not carried the serial number and does not bring about this machine. But no matter what, jumping Siri problem, as long as there is a serial number, the display of the machine, the frequency of accidentally touching Siri will increase.

But Yuehu has the advantage that you can flash the firmware, and this is not supported by Peppa Pig, if you are not sure whether it is Yuehu's or Peppa Pig's, brush the firmware of Yuehu to know~

Note: After brushing the firmware circulating on the market, then Yuehu will no longer display the serial number, and everyone chooses by themselves.

Combined with the advantages and disadvantages of the above version features, let's buy it according to your own needs.

I am Xiaoyuan, I hope the above content will help you.

Addendum: In April 2022, the 1562m version will be fully delisted and has been replaced → 1562U.