Don't you know that we are still stupid enough to buy plants online? Today I want to share with us the survival experience of 12 kinds of leaf-cutting plants, so that you can grow your beloved plants without spending a penny. Take a look at the following 12 common plants and flowers, such as ephemeral flowers, gao bilan, watercress, geranium. Do you have what you want? Learn how to quickly cut the leaves of a plant so you can get new plants for free.
The 12 most common green plants teach you to insert leaves by hand, and one leaf becomes a potted flower and grows wildly
1. Cuttings Season:
First of all, select healthy and easy to grow branches, soak them with carbendazim for 60 minutes, and then remove the shade.
Second, prepare fine sand, expose yourself to disinfection, or boil a pot of water and pour it directly into the fine sand for disinfection.
Again, put the sand in a container of self-denial and pour water.
Why make the container myself? Because there are holes in the bottom of the pot, if you put the fine sand directly into it, a lot of fine sand will leak out of the hole at the bottom of the pot. So you can use plastic bottles or fast food boxes as containers. To ensure the breathability of the potting soil, several small holes can also be drilled in the bottom of these self-denying containers.
Finally prepare a tray, put some water in the tray, cut the prepared branches into a container, and then place them directly on the tray, waiting for the roses to take root before moving into a new pot.
The 12 most common green plants teach you to insert leaves by hand, and one leaf becomes a potted flower and grows wildly
2. Tiger Piran:
Tiger Piran is very adaptable to growing because its leaves are full and beautiful and are generally planted at home by most friends as decoration. Because it is very convenient to plant and raise Gao Bilan in the later stage, even if you forget to water once or twice, Gao Bilan will grow very well, have strong drought resistance, and can grow indoors. Therefore, when you want to pierce the leaves of Gao Bilan, you need to pay attention to the following points:
The first thing to prepare is the new soil, which consists of vermiculite and perlite, garden soil and sand.
Secondly, pick a healthy and strong Gao Bilan leaf without disease. Suppose the selected Gao is too large or too long than the orchid leaves, and cut the whole leaf according to the length of 2 cm per segment. The incision method is a miter cut.
Again, place the cut leaves in a cool and ventilated place to dry, and the part to be cut is slightly dry, and when there is a tendency to heal, it can be directly pierced into the prepared pot soil.
Finally, the pot is placed directly in a ventilated place, and some water is sprayed on the long soil of the pot every day to let the soil adhere to the necessary humidity.
How to determine whether the cuttings are successful or not? The leaves of the Gaobi can be observed. As long as the cuttings do not become soft, it proves that Gao Bi still has the expectation of successful cuttings. Otherwise to make up for a little common sense, suppose you pick a cut with gold edge of the Gao Bi lan leaves, then the cut Gao Bi Lan is also green, there is no phlegon. Here's what you should know.
The 12 most common green plants teach you to insert leaves by hand, and one leaf becomes a potted flower and grows wildly
3. Cuttings of ephemeral flowers:
We all know that it is fleeting, and it only lasts for 4 hours, and it usually blooms at night, so it is called the beauty of the moon in the flower world. For the sake of this month's beauty, how can you insert the leaves of the flash in the pot?
First of all, you need to pick the ephemeral leaves that have a two-year history of growth. It is best to have scratches or wounds on the pages of the old leaves, so that cutting into the soil will be easier to root.
Secondly, the leaves must not be inserted too deeply when cutting, just to let the leaves grow new shoots.
Eventually, patiently wait for the cuttings to grow new roots. Don't always think about pulling it out to see if there are small fine roots, because long-term frequent pulling will only affect the rooting and germination of plants.
The 12 most common green plants teach you to insert leaves by hand, and one leaf becomes a potted flower and grows wildly
4. Cutting geranium:
Friends who have balconies on the basis will grow geraniums, because geraniums have various colors and varieties, which are very suitable as decoration plants and flowers on window sills. About this high-value plant flower, how to plant leaves?
First of all, you need to pick healthy and disease-free geranium leaves. Prepare a tray and put a little water in it. The bottom of the petiole of the geranium is then wrapped in cotton, placed in a prepared tray, placed in a ventilated and cool center, and let the sponge absorb water.
Second, prepare new soil. It is made of perlite, peat and vermiculite. After the center of the cotton bag grows new roots, you can directly pick the cotton and insert the straps and heels directly into the new pot soil.
Eventually, patiently wait for the geranium to germinate. Later, the growth habit of geranium can be isolated and discontinued.
The 12 most common green plants teach you to insert leaves by hand, and one leaf becomes a potted flower and grows wildly
5. Cut the watercress green:
Bean green leaves are succulent, all year round turquoise, often put in front of the computer to watch, relieve eye tiredness; Still to protect against computer radiation. How to cut such a suitable and beautiful plant?
First, pick the thick, fat leaves of the watercress branches. When choosing leaves, it is best to have a petiole. Therefore, when people pick watercress, they find that the leaves are not simply withered. It can be swayed from side to side and quietly removed, so it is necessary to ensure the integrity of the leaves. Then put some fine sand in a small cardboard box.
Secondly, just like the cut leaves of Gao Bilan, the newly picked watercress leaves need to be dried in a cool and ventilated place. When the petiole is traumatized, the leaves can be cut into fine sand.
Eventually, spray the potting soil with water every day and keep it moist. After the watercress leaves are inserted, after about half a month, they will grow fine roots. In another month, the watercress leaves will sprout. When three new leaves grow, watercress can be planted directly in pots.
The 12 most common green plants teach you to insert leaves by hand, and one leaf becomes a potted flower and grows wildly
6. Lilies with cuttings:
The lilies are beautiful and fresh, and I believe many friends love them. However, the method of plant leaf cutting that we share with us today, for lilies, is not cut with the leaves under the lilies, but with the scales of the lilies' roots. In fact, the root of the lily is a bit like a garlic head. Therefore, when cutting lilies, it is necessary to remember to pick the bulb leaves at the roots.
First of all, lily bulbs must be disease-free and robust. Then, wash off the soil on the bulb and remove the damaged or dried leaves.
Secondly, just like peeling garlic, peel one by one. Each peeled scale contains a small portion of the stem disc, which is the main part of the rooting and germination. So peeling to the center, the scales getting thinner and thinner, there is no need.
Third, place the peeled thick scales in diluted carbendazim solution and soak for about 10 minutes. Then the vermiculite with good water retention is prepared as the substrate for lily leaf cuttings. When cutting, thoroughly water the soil with water.
Finally, the soaked lily scales are pierced into the pot soil, and the entire scales only need to be exposed to 1/3 of the soil. Keep the soil moist every day. After about half a month, the scales grow small balls and then germinate.
The 12 most common green plants teach you to insert leaves by hand, and one leaf becomes a potted flower and grows wildly
7. Cutting the Money Tree:
Many of the leaves of the money tree are very appreciative, and they are also regarded as ominous plants that attract wealth and treasure, especially suitable for indoor planting. So many families will reproduce. So how do friends who want to plant cash cows cut leaves?
First of all, the leaves of the money tree must be healthy, preferably with a petiole. Sterilize with carbendazim soak before cutting.
Second, the leaves are inverted or cut vertically into the soil. Keep the pot soil moist every day, and for about 2 months, the cuttings of the cash cow will grow granular root groups.
Eventually, the cash cow sprouted, and then our cash cow was cut down successfully. Compared with other plants, the process of rooting and sprouting of the golden tree will be a little long, and we expect that we must have patience.
The 12 most common green plants teach you to insert leaves by hand, and one leaf becomes a potted flower and grows wildly
8. Cuttings:
African viola, also known as African violet, grows slightly shorter, but African violet blooms all year round, with many flower samples and similar leaf cutting methods.
First of all, when cutting the leaves of African violet, it is necessary to find more consolidated leaves.
Second, prepare a mineral water bottle, fill it with water, and pierce the petiole of the African violet leaf directly into the bottle mouth, so that the petiole is at least 0.5cm soaked in water.
Eventually, when the petiole grows small buds, it can be planted directly in the pot soil. Suppose that the African pansies cannot be raised in the later stages, and now they can grow a variety of leaves in the water. Then move into the pot.
The 12 most common green plants teach you to insert leaves by hand, and one leaf becomes a potted flower and grows wildly
9. Cutting alum root;
First of all, the larger leaves are selected from the roots of the plant to stop cuttings from rooting. In order to ensure the survival rate of the cuttings in the later stage, it is best to insist that the integrity of the leaves is intact when selecting. For example, as shown in Figure 3-5, healthy and impaired leaves are very suitable for plant cutting.
Second, the vermiculite, perlite and peat soil are mixed evenly, then put into a plastic water bottle, and then a hole is drilled in the bottom of the water bottle to ensure the permeability of the soil.
Eventually, cut the leaves into the bottle. Do not put too many leaves at once. Just put 3 to 5 leaves in the bottle. Place the plants in a warm, ventilated center and keep the soil moist. Usually after a month, you can see the tiny roots, and then you can directly move them to the pot for planting.
The 12 most common green plants teach you to insert leaves by hand, and one leaf becomes a potted flower and grows wildly
10. Begonia flower cuttings:
Begonias like to grow in warm, moist centers, so it is best to place begonias in the center of semi-shade astigmatism to stop the maintenance. Begonia flowers are careful in the selection of leaves, otherwise it will damage the mother and constitute infection.
First of all, when selecting the leaves of the begonias, it is necessary to stop disinfecting the cuts. In fact, the leaves of the begonias near the trunk are cut off. We must pay attention. It is best to select young leaves, so that the survival rate of cuttings in the later stage is high.
Secondly, prepare a plastic bottle, separate several small holes at both ends of the bottle, the size of the hole is about 1cm, and then fill the bottle with water.
Finally, the begonia leaves are pierced into the small holes of the plastic bottle and placed in a cool and warm place, carefully ventilated. It doesn't take long for the epidermis of begonia leaves to grow new roots.
The 12 most common green plants teach you to insert leaves by hand, and one leaf becomes a potted flower and grows wildly
11. Cuttings of large rock trees;
Although small, it is a perennial herb with large flowers, diverse flowers and varieties. In a year, the large rock tree blooms twice, in spring and autumn, which is very suitable for home renovation. So let's take a look at the leaf cutting method of Haitong:
First, find an inconspicuous leaf from the mother of the large flower sea tree, and use something that has been detoxified to cut the whole leaf along with the petiole.
Second, prepare a water container, hang the cut leaves above the water container, and soak only the petiole in the water. In the harsh winter, it only takes 21 days to see the leaves of the sea tree grow new roots. Assuming it's summer and the temperature is slightly higher, the time for the leaves to root will be faster.
Eventually, when the leaves grow new roots, they can move directly into the potted soil to grow. Adhere to the humidity around the plant every day. Suppose you only want to hydroponic in water, then you need to prepare the water moss in advance and cultivate the sea tung directly in the water moss.
Otherwise, because the large rock tree is affected by the surrounding temperature, the friends of winter logging must wait patiently, and new shoots will grow in about 3 months.
The 12 most common green plants teach you to insert leaves by hand, and one leaf becomes a potted flower and grows wildly
12. Cuttings of longevity flowers:
Longevity flower is actually a succulent plant, and it is very simple to cut leaves to survive. However, the soil distribution is exquisite, because succulents generally prefer loose and fertile soil, so it is best to choose sand when stopping soil distribution, which can ensure that the succulents of the plant are not affected by the water in the pot.
The primary leaf must be healthy and full, and the petiole must be retained. Just leave the freshly plucked leaves to dry in a cool, ventilated place for a few hours.
Secondly, prepare potting soil, peat soil \ coconut bran 2 parts, perlite 1 part, vermiculite 2 parts, river sand 1 part (carnelian or bluestone), mix well. Then cut the petiole directly into the soil, keep the soil moist, and put it in a cool place for ventilation.
Eventually, because the new leaves of longevity flowers grow slowly, we must wait patiently, generally at least 5 months from cuttings to germination.