Replenish water: If the soil is dry, the lack of water in the plant will make it wet, and it is necessary to water as soon as possible to replenish the water needed for growth.
Eliminate stagnant water: avoid the generation of stagnant water in the pot soil, drain the excess water in time, if the root is rotten, cut the root and disinfect it.
Supplement light: Do not raise in the shade, keep in the sun, but avoid being exposed to the sun.
Reduce the temperature: the curing temperature should be below 30 ° C, it is best to adjust to between 22 ~ 28 ° C, high temperature weather can spray water, ventilation to cool down.
1. Replenish water
During the maintenance of the happy tree, it is necessary to water the soil in time to keep the soil moist, if it is not watered for too long, or if the amount of watering is too small each time, the root system of the plant cannot absorb sufficient water, and the leaves will be swollen due to lack of water. It should be watered once, slowly into the pot, and the soil should be watered thoroughly and stopped. In addition, if the air humidity is low, it is also necessary to spray water on the plant to moisturize.
2. Remove stagnant water
Happy tree likes to be wet, but it is not tolerant of standing water, if you water it too much, there is water accumulation in the potting soil, the root system is always soaked in water, there will be poor breathing and rotten roots, and the leaves will show sagging and yellow leaves after the root system rots. It is necessary to drain the water in the potting soil in time, and the ventilation can be enhanced after drainage, if the root system has been decayed, the plant should be depoted, the rotten roots should be pruned off and disinfected.
Third, supplement the light
During the growth of the happy tree, there should be a certain amount of light to promote its photosynthesis, if it is put into a dark environment during the maintenance period, the plant can not fully photosynthesis, the leaves will begin to sag, should be put into a good lighting environment to raise, so that the plant more sun. However, it should be noted that the plant should not be suddenly put into strong sunlight, so as not to cause the plant to adapt and grow poorly.
Fourth, reduce the temperature
During the maintenance of the happy tree, the temperature should be controlled within the appropriate range, it is not resistant to high temperatures, in the summer maintenance temperature is high, the plant will also begin to grow, the leaves will droop. If it is caused by high temperature, it is necessary to reduce the curing temperature, keep the curing temperature between 22 and 28 ° C, and try to control the temperature below 30 ° C. The plant can be transferred to a cool environment and the temperature can be lowered by spraying water.