High-speed driving often sees such a thing: there are tires falling on the road to "run wildly"; There are cargo vehicles spilled, and the scattered carrying goods fly to the rear car; There are vehicle parts that fall off and hit the rear car; Broken branches and debris blown by the wind hit the window of the car; It is also very common for flying stones to smash the windshield of a car... The hidden dangers of high-speed driving are really invincible, like an "untimely bomb", which always endangers the safety of vehicles on the road!
Today's car owners, to put a layer of explosion-proof glass film on the car has generally become common sense. Although it can play a role in blocking ultraviolet rays, heat insulation and explosion protection, the general glass film is attached to the inside of the car, which cannot protect the outside of the glass. Owners who often run high-speed or expressway will encounter the situation of being hit by the stones raised by the front car to hit the windshield, many of which will appear small pits, and slightly more serious cracks will appear, which will gradually weaken the strength of the windshield and cause fragmentation. Encountering some extreme weather, even being able to directly smash through the car window is not only a threat to life safety, but also not conducive to the preservation of the value of second-hand cars. After all, the owner may be able to change to the original parts glass, but can not enjoy the original installation process and installation environment, the installation effect will be discounted, and even there will be poor sealing, noise, water leakage and abnormal noise, resulting in the second-hand car resale discount.
So how can we better protect the glass, and can play a role in insulating ultraviolet rays, heat insulation and so on? The Schonet Glass Shield armor solves this problem for you.
What is Glass Shield Armor? In general, the glass shield armor is composed of an anti-scratch layer, a highly transparent PET film, a PSA layer and a PET bottom film. Compared with the ordinary explosion-proof glass film, the glass shield armor is installed on the outer surface of the windshield, which has good resistance to blows and friction resistance, which is equivalent to adding a "protective shield" to the glass surface, effectively reducing the probability of glass breaking, protecting the glass while protecting the life safety of the occupants of the car, so that the driver and passenger are more at ease.
The glass shield armor has many benefits as an invisible protective film installed on the outer layer of the glass.
1. Enhance glass hardness
Its hardness is up to 6H (pencil hardness test standard), protecting the original glass during daily use.
2. Reduce the risk factor
Super impact resistance, can resist extremely high impact force, effectively cushion or prevent flying stones from hitting the windshield under high-speed driving.
3. Extend the time of theft
Slow down the impact of external forces on the windshield, improve the driving safety factor, and extend the theft time, thereby protecting the safety of people and property in the car.
4. Super scratch resistance
The surface has strong scratch resistance and abrasion resistance, which can avoid scratches caused by wipers and other things during daily use.
5. Protect the original glass and high-end solar film
Protect the original glass from flying stones, hard objects, and artificial damage, resulting in many problems such as water leakage, wind noise and airbags that cannot be used normally. The guardian of your original car glass and high-end solar film.
6. Reduce time cost
If the glass is broken, it generally takes 3-7 days for the 4S store to replace the glass, and the waiting time of imported models will be longer, which invisibly increases the time cost.
7. Used car value preservation
In general, if the glass is broken and the glass is replaced, the whole vehicle depreciates by more than 10,000-20,000 yuan, resulting in the depreciation of the second-hand car.
Schnaite new fifth generation invisible glass shield armor protective film, China Aerospace Military Technology, casting substrate, a film formation, the use of unique embedded coating technology, so that the substrate and coating fully integrated, extreme wear-resistant, more durable, not all products are called Schnett glass shield armor!
Product material: flexible weather-resistant PET
Product thickness: 6MIL
Coating hardness: 6H
Visible light transmittance: ≥90%
Visible light reflectance ≤8%
Infrared blocking rate: ≥18%
UV barrier rate≥99.9%
Product glue: Ashland, USA
Warranty: 1 year
Construction features: four-way contraction
Construction points: baking gun 400 ° c, irrigation rheumatic baking
Schnitt Glass Shield: Multi-layered protection, more secure, you love the protection expert of the front guard of your car!