#Why are there fewer and fewer mobile phones with lifting cameras now# Whether it is lifting or sliding, this design has been replaced by the digging screen that appeared later! So since the lifting type and the slide type have realized the perfect solution of the off-screen camera used by ZTE, Xiaomi and Motorola today, and achieved the ultimate full screen (there is no opening in the front), why did many mobile phone manufacturers give up later, do it dig the hole screen, and then gradually transition from the hole hole screen to the under-screen camera?
I think this is related to the integrated fuselage and tight seam design concept pursued by mobile phone manufacturers, after all, the lifting type is good or the slide type; Lifting type needs to leave space in the fuselage to hide the camera, and will also produce gaps, which will inevitably have dust, in the absence of time to hide, in fact, for the fuselage space is also very influential, to know that the interior of the mobile phone is really inexhaustible, many mobile phone manufacturers are still reluctant to give such components!
The slide also increases the thickness of the phone! And there are inevitably gaps in the middle (then some people will say, you see the folding screen together there are gaps, there will also be dust!). The external screen will also be scratched because it is placed on the table, etc., for what the next era of the folding screen will be, I have no way to verify, and it is difficult to guess, but today's problems, I think will gradually solve! ）
So the wheel of history will not stop, the same mobile phone innovation will not stop, so the lifting type and slide design of the follow-up will be how the design, perhaps the digging screen is to achieve a real full screen of the transition technology, and in the screen hole to achieve digging holes than the early bangs and beauty tip What is the relationship!
In fact, have you found that the digging hole of the hole screen is actually in the process of smaller and smaller evolution, and in the process of evolution, you gradually know the screen hole, how to repair the screen hole, and also show the content, and then when you use the camera, leave the hole position, this is the iteration of technology! Digging the screen is a must-go journey in order to better do a good job of the camera under the screen!
Whether it is a perforated screen or an under-screen camera, you need to work the front glass panel, which is the same technical exploration! As for the lifting type and slide cover, the technical realization is not difficult, but for the overall weight experience of the mobile phone, as well as the thickness experience and integration experience, it will reduce a lot! So the lifting style will inevitably transition to the past, this is a trend! What do you think about this, welcome to pay attention to me, my entrepreneur Li Meng and I communicate with me!