Author: Wolf's Tooth LY article reproduced from 78DM
It was released in April 2001 and is priced at 1,200 yen
------------------------------
After a look around, in addition to the two old models of the MSV (to color themselves), Gerald's dedicated Ganon Warriors should also have this one choice.
Of course, after all, the cost of MIA's products is limited, so its reduction can only be said to be reluctant, but it seems to be very good at the time.
------------------------------
Packaging display
Front cover
Back profile
This MSV drawing on the back is really full of emotions and cool.
Side closure
List of inner boxes
Inner box A
Inner box B
The inner tank of the box
Main unit exhibition
The whole body is dominated by pale yellow molding, green, gray and various logo parts are painted, and its soul version of the camouflage style shoulder armor has a good restoration. As an early product of the MIA series, its workmanship is still relatively excellent, anyway, I think it is at least stronger than the few of the martial arts.
Styling, figure and detailed portrayal do not have to say, many things in MIA are actually very good to open the mold design, but it is dragged down by the material and workmanship, after all, it is only a cheap finished product line.
The painting on the back is not lazy, especially the four-color coating at the spout, which is full of sincerity, which is worth affirming.
Comparison with the MIA Normal Edition Warriors
The same color change is certain, but the head and backpack are new.
Size comparison
The height of the machine is 19.2 meters, and the height of the toy's head is about 112 mm.
In translation, the ratio is about 1/171.
Movable display
Figure (1)(2)(3)(4): The neck is immobile and the range of motion of the head is small.
Figure (1) (2): The shoulder connection method is a simple ball level, and the flat lift and inner pull of the arm are very limited.
Figure (3): 360 degrees flat at the elbow and wrist.
Figure (4): The elbow is a single joint, and the bending amplitude of the arm is about 90 degrees.
The waist can only be flattened at 360 degrees, and there is nothing else to move.
Figure (1) (2): The flat lift of the leg is very small, and the forward and backward lift amplitude is acceptable.
Figure (3): There is almost no amplitude of inward and outgoing rotation across sections.
Figure (4): The knee is a single joint, and the bending of the leg is very small.
Figure (1) (2): The range of motion of the ankle is small and the grounding is poor.
Figure (1) (2) (3): The cannon and nozzle on the backpack can be swung.
Details are displayed
According to the settings, the head has been newly regulated, that is, with a dedicated monitor.
The color separations on the top of the head and eye monitors are painted and restored, and the workmanship is justified.
side
The details and lines on the torso are very rich, but because of the relationship between the soft glue material and the coating is too thick (the green part is painted), it is relatively blurry, and the workmanship of the official seepage line is not fine enough.
The camouflage paint and side shadows on the shoulder armor are painted, but in fact, there is no shadow on the side of the shoulder armor in the machine design.
The rank and numbered logos on the arms have been restored, that is, the position of the number is lower.
The exhaust grille on the shoulder nail liner and the side of the arm are also painted in grey.
Right arm part
Lower body part
The spades on the sides of the calf are also restored, corresponding to its nickname "Elite Spades".
My left leg has a noticeable lacquer scratch.
The soles of the feet are well detailed, and the inside of the outer nails and the nozzles are also painted.
The paint on the back of the head was also not pulled down.
The backpack is mounted through three jacks on the back.
The grille at the back of the leg is also depicted and painted.
Similarly, the inside of the rear skirt nail and the spout are painted.
The details on the cannon are rich, but the material relationship is very fleshy.
The details and color separations of the backpack are equally rich, but they are also limited by material and workmanship issues.
The shank handle of the light knife can be attached to the rear skirt armor through the connector.
Accessories display
Small shield and triple missile launcher.
The launcher muzzle and magazine have color separations.
Both can be mounted on the side of the forearm (side nails need to be removed).
Beam blade
Replace the hand type
POSE presentation
Final Conclusion:
To put it bluntly, it is the same color change of the MIA normal version of the warrior, but there are new rules in the head and backpacks where the new rules are. The details and engravings of the warrior body are quite well portrayed, but the problems limited by the material and process have been dragged down, fortunately, the workmanship of this one is not a big problem, and everywhere can be seen. I am personally satisfied with the degree of reduction in color matching, the livery of the back and the inner vents have not been pulled down, especially the camouflage shoulder armor of its soul, which must be placed in the assembly, it must be a large piece of sticker. However, due to the relationship between cost, the degree of reduction of logo printing is not high, which is a pity.
In terms of accessories, there are no more hand-held weapons, only shields and triple missile launchers, and the overall playability has been reduced, but if the MIA series plays more, they can still use weapons with each other, which is not a big problem.
I personally quite like a color matching, but unfortunately in recent years have not produced a new toy, I hope that R Soul ANIME can make one in the future.
The above is the complete evaluation of MIA Warrior Cannon, I hope to give some help to friends in need.
A house comment: The old things in the past were conscience goods, and now it is much worse...