Truly can meet the -40 °C environment, the performance is not affected by the thermal conductive silicon wafer, optional Jinling Tongda. It has long been tested by third-party institutions, and its reliability is only compared with imported brands.
The vast majority of thermally conductive silicone wafer factories are still weak in the configuration of test equipment. If customers require hundreds of hours of cryogenic testing, they can only send it to a third-party agency, and the cost of testing is as high as thousands to tens of thousands. Although these test results are convincing, they lack simulation verification of the customer's product assembly state. Compared with Jinling Tongda, the accurate test scheme, test results and its reliability are recognized by the Chinese Academy of Sciences and the National Institute of Equipment.
Recently, Huawei, China Mobile's 5G construction has been opened to the highest altitude mount Everest. Thermally conductive insulation materials are indispensable in 5G base stations, communication equipment and related instruments. It is said that the mountainous environment there can reach as low as -30 °C, and it is certain that all equipment products must be tested at a temperature of -30 °C or even lower. However, this has no pressure on the thermal conductive material that Jinling has access to. The XK-P series has not only passed the third-party low temperature test, but also carried out high and low temperature impact in its own laboratory. Among them, there are corresponding tests for 5G module customers in Shanghai.
The conditions specified by the customer are -40 °C, the test time is 600 hours, 900 hours, 1200 hours respectively, and the appearance is visually checked after the completion of each condition, and there is no obvious change.
High and low temperature rapid temperature change -40 °C/150 °C, after the test cycle of 500 cycles, high voltage breakdown test, the mean change range of less than 10%, to meet customer requirements.
The customer engineer evaluated the test results and compared the third-party test reports of other companies, and finally chose Jinling Tongda.
Jinling Tongda is also in many ways incomparable with peers, such as:
(1) Jinling Tongda is equipped with 3 sets of constant temperature and humidity aging boxes, and any sample can be verified immediately as long as it is sent over;
(2) Voltage resistance, flame retardancy, silicone oil volatilization, etc. can also be tested by themselves. Save customers the cost of upfront testing;
(3) The raw materials are modified, and the crosslinking reaction between the heat transfer powder and the silicone oil is more complete. The finished product is more stable.
In the field of 5G communication applications, customers have used Jinling Tongda. Customer testimony plus measured data, perhaps what you can buy is the most assured thermal conductive material in China.