Hello everyone, today's [virtual review] T4021 (Diavel 1260) brought by MAX
01
Product information
project | Information |
Number of particles (pcs) | 2025 |
Size (length * width * height, cm) | 53.4*19.5*32.3 |
Number of dolls (pcs) | |
Dynamic groups | |
Light group | |
Time to market | April 2022 |
02
Meitu display
▼ Meitu Hideyo
03
preface
2022 should be regarded as the first year of 1:5 large size motorcycle blocks.
After Lego reopens the mold, making this large-size motorcycle should also be a product that everyone will do next.
What about domestic building blocks? Of course, this explosive series line will not be spared.
No, years later, all kinds of large-sized motorcycles came out.
Tegole has produced four large-size motorcycles.
As the Great Devil in alliance with Sian, you must see!
Out of curiosity, Max takes you, cloud building once.
The following sources are from Baidu Encyclopedia:
Diavel 1260 Lamborghini
Heavy machinery manufacturers DUCATI (Ducati) and Lamborghini (Lamborghini) two Italian car manufacturers cross-border cooperation, recently launched a limited edition locomotive based on lamborhini (Lamborghini) in 2019 supercar FKP 37 for the design inspiration of the Diavel 1260 Lamborghini, which is also the first time that the two sides have jointly created the first heavy machine, will be limited to 630 units
After reading the introduction, let's watch the positive film! Let's go
04
Box photo
▼2025, the front of the physical object on a black background, the details and movable parts of the back.
▼ Official size: 53.4 * 19.5 * 32.3, unit cm, large brake discs do not have two colors, the official ratio is also marked as 1:5.
05
Contents
▼Drawer type pulled out two inner boxes, now also save money, there is no self-sealing bag, only the universal bag used one.
Each step controls 3-4 packs of bricks, and this step is reasonably subcontracted.
▼Large-size wheels with a gold color. Similarly, the rear wheel is wide, the front wheel is narrow, the quality is harder, and when we install the front wheel, we must use some force, which is more difficult to install.
▼ A manual with step subcontracting. It is also a sticker that is only pasted after the assembly is completed.
The printing quality of the stickers is average, with a slight color difference between the stickers and the parts.
▼All parts are home-made parts, and the feel is suitable. Universal latches are classified, and the latches are very tight and hard.
The disposable bowls that are usually packed can let the store take more than a few, which is a good choice for parts.
Notice that the small rubber band is put on the I-beam.
06
The building process
▼I started spelling. It is also the assembly display stand first, and the sticker is a little larger than the part.
▼This time, the cylinder body adopts transparent parts, but it is not connected together. In the same way as the M1000RR, continue assembling on the display stand. The 53-step rubber band will not be connected until it takes 72 steps.
▼ Habitually make an extra circle. A 6-speed gearbox. The new suspension parts are gold this time.
▼ The two exhaust ports on the right side do not seem to look like two large wheels. Single swingarm design, the most feared is that the wheels are crooked when they land on the ground. This doesn't look crooked, yes.
▼ 62 grid is very very tight, everyone should be careful when installing, but 63 grid is too loose, not good-looking, everyone pay attention to it. Oh, praise this chain, watch the animation, very silky.
When installing the chain, the front 16-tooth gear must be pushed out one block first, and then pressed back after the chain is installed.
▼ Before installing the panel, I did not connect the chain first, I was afraid to disassemble.
The circular panels on both sides have different structures inside, one side is loose, and it will be corrected later.
This engine linkage is strange, of course, it may be that I don't understand motorcycles.
▼This fork part also adopts a gold color scheme. New parts, one is not lacking.
There are also brake line lines included, but only 2.
▼ Headlights, before this I come to install a lamp brick, is to make it bright.
But why does the shape of this headlight remind me of the previous universal charger????
▼ The several golden racks on the side look good. But I see the real car seems to be a "4", I will look at it later.
Since 90% of the time I finish spelling and then pasting, I usually paste it while spelling.
▼ But as you can see, this car feels like 70% of the weight is on the front of the car, and when all the appearance panels are installed, it will be top-heavy and will lean forward. Finally, fight multiple racing brackets and become
Done, sprinkle the flowers!
07
Finished product display
▼Finished product 360 degree display
▼Chassis
08
detail
▼This time the bracket is placed on the front of the car, and the back is a single rocker arm, which is difficult to fix.
The engine is very strange, there are 2 cylinder blocks in the lower heat dissipation zone, and there are 2 cylinder blocks above, the L type is 90 degree angle, but the linkage mechanism is very strange. I don't know if this is the case, I didn't study it.
▼ The following with the foot shift, this I still remember, I drove "Jialing Boy" when I was young.
The headlights at the front of the car are not highly restored, the real car seems to be not so big, or the black border is the square headlights inside.
▼ This handle should be regarded as one of the most restored, and the sticker should be made into a silver sticker to do the rearview mirror.
Seeing this chair, I remember people on the Internet saying that the boys who drove Ducati were all daily omelettes and intestines.
▼ The single rocker arm also made a mud plate with taillights. The 62 chains are very tight and nice to look at.
▼ Looking at the two foot braces next to me reminds me of the beautiful women sitting in the back seat that I see on the Internet, and it really looks good.
▼ The fuel tank cover seems to be a little small in contrast.
Two super-giant exhaust pipes.
▼ This black round cover on the right side is loose, I will change it. Move the position a little to the right and find a hole to insert it.
▼ The problem of the light brick will be one unit higher, and both sides are blue small round plates, is not possible to change it.
▼ Take a look at the comparison chart
▼The cutest female model in the universe is back for a limited time!
09
Dynamic image display
▼The rebound effect is OK. Smooth gear changes. Push normal.
10
summary
project | Experience the feeling |
appearance | The 1:5 large size motorcycle is basically good-looking. But the degree of reduction of this machine is almost, and the other red 1299 looks good. |
structure | The structure is normal, and the engine block is in a strange position (probably I don't understand motorcycles). |
quality | The exterior parts are not scratched. The latch is tight and hard. The assembly feels tight. The chain is very smooth and tight. |
function | 6 speed shifting, engine linkage. |
summary | The difficulty of assembly is general, and it can be completed by reading the instruction manual. 1:5 This moto product line is great and very well placed. The cost performance is extremely high, about 200 costs, let it add a highlight of the ornaments for the home, at least the real car can not be bought, the building blocks can still be. Based on the Lamborghini joint name, Bought it, making me very eager to buy more Sian, what to do? Come and stop me. |
The above is the sharing of this issue, thank you.
——————————————————————————