preface
Not long ago, Zhidi released PCIe4.0 Zhidi TiPro7000 SSD. However, at present, the number of users who choose to buy the PCIe4.0 platform on the market is still a minority, and for the vast majority of users who are not very extreme in their pursuit of performance, Zhimu has also prepared a new product based on the PCIe3.0 platform - TiPlus5000.
What's the improvement over the familiar PC005? How does heat and speed perform? The following is to reveal the explosive performance of this blockbuster new product.
Product introduction
The Chimic TiPlus5000 package features the product printed on the front, the 1TB version has a reading speed of up to 3500MB/s, and the Xtacking 2.0 logo in the upper right corner.
Printed on the back of the package are the product's specifications, and this SSD interface is NVMe M.2 with a five-year warranty.
Unpack and contain the SSD hard drive, screws, and instruction manual.
The included screw pack should be kept for safekeeping.
Two sizes of screws and a raised nut are included.
The high-density Yangtze River storage third-generation 3D flash memory chip is blessed, and the state-causing TiPlus5000 adopts a single-sided component design.
The TULUS5000 front uses a master controller with four flash memory particles.
The back does not have any components, which is suitable for notebook single-sided applications and also facilitates the addition of heat sinks.
The main control comes from Lianyun, model MAP1202A, HMB no slow, using 22nm process, support PCIe 3 *4, support NVMe1.3 standard, support TLC and QLC flash memory, maximum capacity 4TB. The main control four-corner sealing glue reinforcement effectively prevents the chip from being desoldered due to bending during installation.
The particle model is YMN09TC1B1HC6C, and four 256G particles form a 1T capacity.
Comparison of the three products
From left to right, pc005 Active, TiPro7000 and TiPlus5000 are used, the three SSDs all use NVMe M.2 interface, equipped with Yangtze River Storage's self-developed Xtacking architecture 3D NAND technology, while TiPro7000 and TiPlus5000 use Xtacking 2.0 architecture, further unlocking the potential of 3D NAND flash memory.
The Titum ZHITAI PC005 Active SSD was tested using CrystalDiskMark with read speeds of up to 3501.47MB/s and write speeds of up to 2778.79MB/s.
CrystalDiskMark test also performed well, the state-oriented TiPro7000 SSD read up to 7478.12MB/s, the highest write 5566.4MB/s, almost in the blink of an eye can read large videos, photo materials, productivity full.
Previously, the charging head network in the "Mac user cut video is no longer uncomfortable, to titanium PC005 Active 1TB SSD review."
"PCIe4.0 Era Pioneer, Zhi state TiPro7000 SSD Review" in the two articles for everyone to test the other two products in detail, interested readers can read the past articles.
Speed test
The platform used here is the AMD R7 5800X + MSI X570S + Ten Quan 8GB×2 3600MHz, which is measured with an SSD inserted in the main disk position of the motherboard.
CrystalDiskMark performs well, reading 3482.53MB/s, writing up to 3210.4MB/s, almost in the blink of an eye can read large videos, photos.
Use ATTO Disk BenchMark to test the difference in transfer speed under different file sizes. At a file size of more than 128 KB, the write reaches 3GB/s, and the read reaches 3GB/s, which is quite good.
What experiences can I upgrade?
Desktop and notebook expansion and upgrade
SSD believes that the vast majority of people buy or installed, expanded, a high-speed, stable SSD is the guarantee of daily software startup speed, state-oriented TiPlus5000 can meet your needs.
External storage can also be read and edited directly, comparable to built-in storage
The super high read speed of the State-oriented TiPlus500, with the Lightning hard disk enclosure, large video and picture files can also be quickly opened and edited by PS, Pr and other software in the external storage. There is no need to dump to in-machine storage, which greatly improves work efficiency and plugs and plays.
It is not impossible to install the program directly on the mobile hard disk, without disassembling and expanding, Xiaobai can also easily operate. In the face of the read and write speed of the state-causing TiPlus5000, the device interface has become a bottleneck, and this trick is used to ensure that the device interface is Lightning or USB4 interface as much as possible.
Charging head net summary
As another masterpiece launched for Gen3 platform users after PC005, the State-oriented TiPlus5000 uses Xtacking 2.0 technology to bring higher storage density, faster I/O read and write speeds, and comprehensive performance upgrades. The storage particles adopt the third generation of Yangtze River Storage three-dimensional flash memory chip, TLC particles, excellent quality, and the official provides a five-year warranty.
The state-oriented TiPlus5000 is available in 512GB/1TB/2TB capacity specifications, and the SLC Cache intelligent cache and intelligent temperature control system make daily use faster and without frequency reduction.
As a new PCIe3.0 SSD in the PCIe4.0 era, the New Wine in the Old Bottle makes the TiPlus5000 equipped with the 3D NAND technology of the same generation of TiPro7000, which can be described as full of sincerity. The performance is basically full of the upper limit of PCIe3.0 bandwidth, if you do not plan to upgrade the PCIe4.0 platform, then this SSD is an efficient choice for computer speed.