There is an old treasure in the family! In my CHAO, classic cars are yellow label cars [laughing and crying], but in the scope of the world, there are many places with a strong classic car culture, a classic classic car, has been a symbol of culture and inheritance, its essence is not just an old car so simple.
In fact, as early as the beginning of reform and opening up, we also have a classic car culture in China, I remember when I was young, when my mother was still working in a state-owned enterprise, the unit organized a movie to watch the welfare, as if it was this movie.
Although he was still young at that time, after watching the witty and humorous performances of Mr. Chen Qiang and Teacher Chen Peisi, I still can't help but look back on it. However, when I went to junior high school, when I watched this film with my classmates, it was the figure and long legs of the female number one that became the focus of our discussion [covering our faces]. When I waited for high school to review this article, I found that the words spoken by the female number one in the park at the end of the movie to the second son played by Teacher Chen Peisi were the focus of the point, she said: Her foreign husband is not at home on the weekend, you can come to my house... [Laughing and crying] seems to reflect the mainstream pattern in 20 years.
Idle will not be ripped off, we will directly start today's old car refurbishment program. The classic old car of 2002, to be honest, the car is really in good condition, except for the back suitcase that was knocked into it, the other positions are basically the original paint, but the whole car is scratched.
Instrument style in the late 90s and early 2000s. The era of the red cushion screen meter replaced the era of mechanical digital meters, which was also an open and rough era. Compared with today's colorful screen meters, the instruments at that time were monotonous but simple.
After the first time I lifted the vehicle, I was very surprised to find that there was no large area of oil leakage and water leakage. I thought it was a used car dealer who brushed the engine in order to buy a good price. Later, I thought about it carefully, it turned out that I was a villain, the car only sold for 4,000 yuan, can I brush you so clean?
It is very rare that this car is manually transmitted. Some people say that manual blocking is called driving pleasure, but it is actually poor! I don't think so. In 2002, there was a manual car, that is, a bubble sharp weapon, but as long as you don't look like a "flower", as long as you want to drive this Audi old A6, make sure you have no disadvantage.
Ruhua said, you are off topic, repair your car well.
Originally, I wanted to change a gear shift operation mechanism for the owner, but this car was too old to buy this mechanism. People, they are all forced out, since they can't buy it, then fix it themselves. Finally replace the loose pin head of the universal joint, and the problem is solved.
After all, it is more than 20 years old, and the gearbox bracket pad has been broken.
Fortunately, many of the accessories of this car and savoy-Volkswagen Passat B5 are common, so these rubber parts are still available.
The transmission bracket on the other side has also been replaced, so that it is much more stable when hanging gears.
Because the car was bought second-hand, the original owner was also a toss-and-turn master, replacing four short springs. Nowadays, we are doing large-scale surface road correction work on our side, and the lowered cars often have close contact with the ground, so the current owners intend to change back to the standard shock absorbers and springs.
The front and rear four shock absorbers and springs were replaced by standards, fortunately, the original owner did not throw away the original car springs, but the four shock absorbers had to be replaced with new ones. I thought it could be easily done, but I didn't expect that the original supporting shock absorbers of the old car were not stocked, and the result was that the four shock absorbers were put together from Shijiazhuang, Shanghai, Hangzhou, and Beijing.
Of course, refurbished old cars must pay attention to details, and this kind of glue block and other things have been completely changed at one time.
The half-axis outer ball cage, none of which is good, is "quacking" when it is generally directional. Change the half shaft, expensive is not expensive first, you can't buy it, forget it, or change the cage alone, save money and buy it.
After replacing the cage, the half shaft is renovated, not much money, the old car, can save the place to save, we only buy the right one and do not choose the expensive.
Next came the refurbishment of the engine part. Fortunately, the machine didn't burn oil, so it didn't need to be overhauled. Many people say that I am a major repair professional, in fact, this is not the case at all, and it is my ideal to change organic oil every day.
Although the machine does not need to be overhauled, many peripheral attachments are broken, cracked, broken...
Look, they're all broken into several pieces. And it was broken before, and the previous repair god tried to repair the pipe with electric tape.
After asking around, I actually said that no one was in stock. The car is not old, and it is also a naturally aspirated version of 1.8 without T, and there is less stock.
Later, a flash of inspiration came to mind, and it seemed that the old B5 of passat had a batch of 1.8 naturally aspirated cars, and the amount of ownership was still very large. So I found the accessories of SAIC Volkswagen, dug three feet from the warehouse, and actually found an inventory.
Finally, there was rice under the pot [cover my face], put the tube on it, I thought that the matter was resolved satisfactorily, but it turned out that I was sloppy.
Because there is also a broken exhaust pipe at the bottom, this thing is commonly known as "pipe", which is a pipe for the exhaust ventilation of the crankcase, and the previous pipe is the upper section, and this is the lower section.
Go to the accessories dealer again to rummage through the inventory... The whole warehouse was turned upside down by me, thank goodness, found an inventory, it is estimated that the ash on it has fallen fifteen years ago, it does not matter, can be used on the line, not exquisite.
Camshaft oil seal has an oil leak, this is already the best situation I can think of, God has an eye, this oil leaking camshaft oil seal, actually not the exhaust pulley side of the oil seal, thank goodness, this side of the change is very easy.
Because it was bought by a second-hand car, I don't know when the last oil was changed, so I didn't care about it for the time being, I changed it directly, but the oil released looked quite clean.
Filled with fully synthetic motor oil, large iron drum. It is estimated that many people want to say that the big iron barrel is not good or the like, I can only say that the Buddha does not cross the people without Hui Gen [Ya Ya]
The transmission oil of the manual transmission is also limited, do not think that only the automatic transmission oil needs to be changed. Generally, we recommend changing 60,000 kilometers.
Pour the gearbox oil into the container, this gearbox, the amount of oil change is more than two liters, less than three liters.
Manually inject transmission oil into the gearbox. It is estimated that many people will feel that this manual mode is relatively low, but what I want to tell you is that I have used both electric and pneumatic, and finally chose manual, because manual safety is not stressful.
The oil is added from the side filling port until it overflows and is level with the filling port.
The next step is to replace the transmission oil, the era of changing the transmission oil with the brake pedal with the foot is gone, and now it is replaced by a compression brake oil replacement machine, which is replaced very thoroughly.
The advantage of the machine is that it can operate on its own, all we have to do is loosen the oil screws and then let the machine replace the brake oil.
The old brake oil is released from the oil discharge screw hole of the sub-pump and then connected with a recycling pot.
Many times, the accessories of the sub-factory are far less good than the quality of the original factory dismantling parts. The trunk cover of this car is dented in a large piece, directly dismantling an old one, not only solid but also the position shape is appropriate, and the gaps are very uniform after installation.
The broken leaf lining is replaced with a new one, and the old one hangs on it swaying with the wind, which is really a hindrance to the appearance of the city.
Replace the new fender lining, which looks comfortable, and then it is time to paint.
The first step in making paint is to do sheet metal first, although there was no major accident before this car, but small rubbing and small touches are inevitable, some depressions and the bottom surface that has not been treated before the paint must be re-sheet metal repair.
Strictly speaking, the less putty used to paint, the better, as much as possible all metals are repaired with sheet metal, but in fact this cannot be done unless the latest putty-free repair technology is used.
Every detail is handled, the depression is flattened, and the old paint is then ground off.
We also make paint to beat putty, but you can rest assured, when the time comes to grind off the putty, it will be a thin layer, not too thick.
The trunk lid was removed, it was 2.5TDI [cover your face], and it was actually a diesel car, haha.
Full of wounds...
But these are only temporary...
Before painting, you must wear a two-component primer, which reflects the professional ethics of the painter.
The baking room was just cleaned a few days ago and it was relatively clean.
I won't shoot the rest of the painting process, I'll have to leave...
The four steel rings are also full of holes, which is really an obstacle to viewing. Many people say that the steel ring is new to paint directly, you are wrong, the steel ring is not paint.
The first step is to remove the paint first. Throw the steel ring into the paint removal pool and soak it, so that the previous "paint" is completely detached.
Then polish the aluminum alloy material, increase his adhesion coefficient, so that the "paint" can be better adhered to it.
Once polished, prepare for the next step.
As mentioned earlier, the paint of the steel ring is actually not paint, because he is a powder that is sprayed on the surface of the steel ring. Then it melts at high temperatures to form a layer of paint-like stuff.
Of course, after the spray, we must continue to spray paint, this time it is really spray paint, that is, the last color.
Then spray another layer of bright paint, so that the reborn steel ring is presented in front of you.
After the paint is done, the leaking yellow taillights of the original car are a bit annoying, and the taillights of the original car are replaced.
Man saddles by clothing horses, and this cart is also framed. After painting, refurbishing the steel rim, and changing the taillights, the whole car was renewed, just like Aunt Xiaoqing suddenly returned to 20 years old, amazing not stunning, Laha sweep not Hala sweep [refueling]
The vehicle is refurbished and delivered perfectly! The classic old car has rejuvenated again in the baptism of the years and in our careful care. In the long years to come, it will surely shine and reappear.