laitimes

Poor router signal? Move these 3 places, "turtle speed" becomes "god speed"

author:Home improvement design small master

WiFi is everywhere in our lives, in order to brush the drama comfortably, collective black, high-speed and smooth network is essential.

However, many people find that the WiFi at home has been used for a long time and began to browse the web more and more slowly, watching videos intermittently, entering the wireless dead zone without a signal, and using the network to lose patience.

In this case, many people think that the router is wrong, but in fact, it is not necessarily Oh!

The next time you encounter a poor signal on the router, you may wish to try to move these 3 places, "turtle speed" becomes "god speed"

1. The antenna of the router

Routers generally have 2-3 antennas, if the antennas are placed in the same direction, it will cause the transmission signal in that direction to be very strong, while the signal in the other direction is much weaker.

Therefore, when placing the router, it is best to put its antenna in different directions in order to expand the WiFi signal and allow the signal to better cover the space at home.

Poor router signal? Move these 3 places, "turtle speed" becomes "god speed"

2. The switch of the router

If the router is not turned off for a long time, more and more data will be cached, which will affect the speed of transmission and lead to poor signal.

Secondly, due to structural problems, the heat dissipation of the router will be relatively slow, so there will be overheating after a long time, and the long-term high-load working state will only accelerate the aging of the parts inside the router, even if it is a hundred megabit fiber, it is possible to become "turtle speed", there will be various problems in network delay, and slow down the network speed.

Shutting down and restarting the router is conducive to clearing the cache garbage inside the router.

It is recommended that it is best to restart the router in 1 week and let it also rest.

Poor router signal? Move these 3 places, "turtle speed" becomes "god speed"

3. The jack of the router

The back of the router has several sockets for connecting the network cables.

But there will always be a few idle sockets.

However, these sockets are open, easy to contact with dust, if these dust is not cleaned in time, it will block the router, resulting in poor heat dissipation of the router and slower signal.

Therefore, it is also necessary to regularly clean the dust of the router socket with a cotton swab.

Poor router signal? Move these 3 places, "turtle speed" becomes "god speed"

Secondly, if you want the signal of the router to be fast, its placement is also exquisite

1. Place in an open location

"You're blocking my signal" is real; the signal emitted by the router spreads from all sides.

Objects are too large to block the propagation of the WiFi signal. Therefore, it is recommended that the placement of the router is preferably an open position with no large pieces of furniture around it, and the height is preferably 1m from the ground.

Poor router signal? Move these 3 places, "turtle speed" becomes "god speed"

2. Keep away from electrical products

Most of the electrical appliances such as televisions, induction cookers, and microwave ovens in the home are devices that directly emit electromagnetic signals, and if the router and these appliances are placed together, the WiFi signal will also be interfered with.

Poor router signal? Move these 3 places, "turtle speed" becomes "god speed"

After reading this, you know how to do it, right? If it is useful, click a thumbs up to support it!