For many novices who are just getting started with video production, they will not know what memory card to choose, and some friends may know that they need to choose a fast one. But in fact, in addition to the speed, it is also necessary to consider the characteristics of this memory card for the application scenario. The armored microSD memory card not only has high-speed reading, but also has good cold resistance and heat resistance, impact resistance and other characteristics, to ensure that it still maintains stable performance in various harsh environments, and is also suitable for more equipment such as action cameras and drones.
You should know that many devices such as action cameras and shooting drones use microSD cards. But in video recording, especially high-definition video recording, it often requires a larger storage capacity. The MICROSD memory card provides a variety of capacity versions of 16GB-256GB, such as 128GB, 256GB, which can meet the needs of our long-term high-definition video recording and large amount of video material storage.
In addition to the need for sufficient capacity, for HD video rate recording also need the memory card to have fast enough read and write speeds. To know that the impact of different speed memory cards on the picture is very obvious, when you use a low-speed memory card, the recorded picture clarity may not reach the clarity you set. The armored microSD memory card adopts the UHS-I standard, U1 speed level, which can easily cope with high-definition video recording.
Its built-in BiCS FLASH 3D flash memory, the official read speed is 100MB/S. To test the actual speed, use a USB 3.0 card reader to plug into the COMPUTER's USB3.0 interface.
In atTO speed measurement, starting from 128KB files, its reading speed reaches more than 90MB/S, and the writing speed reaches more than 23MB/S, so its actual use speed is relatively close to the speed given by the official, and its writing speed is also enough to meet the needs of high-definition video recording.
When we need to import recorded video footage into the computer, in the face of a large amount of data transmission, we need faster speed to improve efficiency. In the actual transmission performance, we can see that its speed can basically be maintained at about 90MB/S. Fast transfer, a large amount of material can also be done in a short period of time, which is also another benefit of high-speed memory cards.
When we shoot for a long time in the snow or hot sun, not only test the performance of action cameras and drones, but also the stability of memory cards is also very important. The armored man microSD memory card has good cold and heat resistance characteristics, and easily copes with harsh shooting environments. It can run stably between -25 degrees Celsius and 85 degrees Celsius, so whether it is shooting ice and snow, fire subjects, or action cameras recording high fever for a long time, drones exposed to the hot sun for a long time, etc., the armored man microSD memory card can cope.
In addition, for the captured material, if the data loss is caused by the unstable performance of the memory card, it will be a very large loss, and the armored microSD memory card has good waterproof, impact-resistant, anti-static characteristics. You can avoid damage caused by soaking in water such as knocking over the water cup when you put it on the table, or washing clothes in your pocket and forgetting to take it out. The good impact resistance coupled with its own quality is relatively small, not easy to be damaged by falling. In addition, the anti-static feature can prevent problems such as short circuit or poor contact when used on the device.
In general, the ARMOR MICROSD memory card not only has excellent speed performance to meet the needs of high-definition video recording and high-speed transmission, but also has good cold and heat resistance characteristics to adapt to shooting in a variety of harsh environments, catering to the shooting conditions of action cameras and drones. And stable performance, can greatly reduce the failure rate, put on data loss.