Not enough styling,
Hats to put together.
Hats as fashion items,
Loved by everyone.
And so it goes
The demand for hat embroidery will naturally be relatively large.
But
The shape of the hat varies
Different shapes, different embroidery areas
How should I choose an embroidery frame?
The following is a detailed explanation of how to choose the embroidery frame for hat embroidery.
1. Eight-in-one device
Eight-in-one device: The eight-in-one device contains 8 kinds of embroidery frames of different sizes, designed for embroidery that is difficult to pinch the frame. Among them, the size of the 184 * 203mm hat embroidery frame is very suitable for embroidery on the back and side of the hat, but it is not suitable for the front of the embroidered hat.
How-to
1. Put it away and clamp the bracket arm tightly
2. Put it into the cap embroidery frame
3. Padding paper and fixing the hat with clips
4. Start embroidery
2. Arc-shaped device
The arc device is very convenient to operate, just need to open the frame, hoop the hat, close the frame, you can insert the device into the machine and start embroidery.
The curved device is suitable for various types of hat embroidery, especially for thicker hats. The device allows you to embroider closer to the brim than any other hat hoop, so you can make full use of all the space on the front of the hat to embroider large patterns. However, you cannot embroider the sides of the hat.
1. Clip the hat
2. Fix the arc device to the embroidery machine
3. Start embroidery
3. Cap embroidery device
The hat embroidery device consists of a hat ring, a hat holder and a hat drive.
It is suitable for embroidery on the front and sides of the hat, not suitable for the back of the embroidered hat.
1. Insert the liner
2. Install the hat and fix it
3. Fix the cap embroidery device to the embroidery machine
4. Start embroidery, embroidery on the front and side of the hat respectively
If you also need to learn more about these devices
You can call the free consultation hotline below
400-900-2939