After stopping heating, does the floor heating valve in the home need to be closed? Understand clearly before stopping warming!
Although the temperature in many northern regions is still very low, there is already a clear trend of warming. Friends living in the north in the winter, almost all rely on integrated heating to survive the cold winter, and now we also need to consider a problem, that is, the time from the heating stop is getting closer and closer, after the heating stops, does the floor heating valve at home need to be closed?
Before the home to stop heating, I will not close the home floor heating valve, I think there is no need for this, but some time ago when the home to repair the floor heating, the maintenance master told me, every time after stopping the heating to remember to close the heating valve, the master said that after I found out that I have been doing it wrong for so many years.
It is estimated that many friends will not deliberately close the valve of floor heating after stopping heating at home, it is recommended that everyone must understand this problem clearly before stopping heating, so as to avoid affecting the normal use of floor heating at home.
- After stopping the heating, be sure to close the floor heating valve in your home!
Many friends will not deliberately close the floor heating valve at home after stopping heating at home, in fact, this practice is very wrong. If the valve is not closed after the heating is stopped at home, there will be a certain danger.
First of all, the floor heating pipes in our home are all tiles or pipes under the floor, the moisture inside the pipe is very heavy, and the moisture drainage of the floor heating itself is relatively poor, and the floor heating needs to use water as a medium in the process of heating, so if there is no valve after the end of heating, it is likely to affect the service life of the floor heating.
If we do not close the floor heating valve, then the inner wall of the pipeline is easy to corrode or rust because of moisture, and when the heating is used again, it will affect the normal use of floor heating, and it will also shorten the service life of home floor heating, and it is easy to have some fault problems.
If the floor heating valve is closed after the end of heating, then the external air can be prevented from entering the pipe, so that the microorganisms inside the pipe will not be in direct contact with the air, which can reduce the possibility of breeding bacteria and ensure the normal use of floor heating.
In addition, after the end of heating, there is no pressure in the floor heating pipe at home, if the valve is not closed in this case, then the next time we enter the central heating, it is likely that there will be water leakage or other problems due to sudden pressure, and it will be particularly troublesome to maintain.
Therefore, after the end of heating, closing the valve of home floor heating will be more secure for safety. Before starting the central heating for the next time, we also need to deflate the main valve of the floor heating in the home, so that air can be avoided from entering the pipe when the pipe is filled with water.
If the air enters the pipe, it will affect the heating effect of the home, and it is easy to leak and other problems, so it is very important to deflate the valve before closing the valve.
- How to clean the geothermal heat in my home?
If the floor heating at home is not cleaned for a long time, then it may also affect the heating effect of our home, and there may be problems such as air leakage in the process of heating, and there is a certain danger, so we must regularly clean the electric heating in the home.
PSI cleaning method is a relatively common cleaning method, is through the compressed air as a power, and then the use of PSI transmitter to the inside of the pipe to launch a larger than the inner diameter of the pipe 10% to 20% of the characteristic projectile, and then through the projectile along the pipeline high-speed movement and friction with the inner wall of the pipeline, to achieve the cleaning effect.
This cleaning method uses a dry physical cleaning technology, but now this cleaning is basically imported, so the cost of cleaning may be relatively high.
In addition, we can also use the pneumatic pulse line cleaning method, which is to clean the stains inside the pipe through the pneumatic pulse, but this method does not have a fixed value in terms of charging, and there may be different charging standards in each region.
The chemical flushing method is also a relatively common geothermal cleaning method. It is a chemical drug to wash away the stains and rust inside the geothermal pipe, but if this method is often used, it may also cause some damage to the geothermal pipe, so it is not recommended that you choose this cleaning method.
We in the process of using geothermal heat cleaning floor heating is a particularly important problem, if the floor heating cleaning is not clean, then the remaining stains will accumulate more and more, affecting the heating effect of the home, but also affect the safety.
After the end of heating, it is recommended that you must close the main valve of the floor heating, and at the same time clean the floor heating at home to avoid affecting the normal use of the next time.
【If the picture is infringing, please delete the private message】