How to dry fresh noodles
Dry mania, of course
In areas or seasons where the air humidity is 60-80% and the climate is warm (the average temperature is not less than 20 ° C), of course, fresh noodles are hung on the clothes rail to dry. Due to the long air drying time, the product quality is good and it is not easy to appear crispy. This approach should be adopted in the folklore of the continent. The drying room can be divided into two kinds of mobile drying and mobile drying, the front end is fixed with a clothes drying pole, and the fresh noodles are hung on the clothes rail to the drying room, which is dried by warm air, which is intermittent production. Transitional air drying is a continuous drying method in the tunnel construction type dryer, drying equipment, heat pipe radiator, heater tube by blower motor, dispersion and wet machine, cooling fan, etc., sound card frame transition device, transmission chain, chain, rotating shaft, motor, etc., fresh noodles hanging has a better registration into the oven, slowly migrated in the oven, abide by the rules.
Preferably, the cutting rod is provided with a cutting groove, the cutting groove is provided with a third motor, the output end of the third motor is fixed with a second telescopic rod, the other end of the second telescopic rod is fixed with a blade.
Optimization, referred to as the first drying chamber wall at the other end of the fixed installation of the first sprinkler equipment, describing the first sprinkler device equipped with a fourth movement, describing the output end of the fourth motor fixed rotation shaft, the rotating shaft fixed support rod, the external mounting of the support rod and the material ring, the material ring inside and inside is provided with a plurality of outlet holes.
Preferably, the top wall of the second drying chamber is fixed with a second spray device, the second spray device and the first spray device is the same type of spray device.
Preferably, one end of the second drying chamber is provided with a second outlet, the other end of the second drying chamber is provided with a first outlet. The first drying chamber and the bottom of the second drying chamber are actively installed with a sealing device, one end of the sealing device is provided with a handle for opening and closing.
Preferably, the top of the box is fixedly installed with a storage box, the top of the storage box is fixed with a feeding port, the feeding port is connected through the feeding tube to the first spray device and the second spray device.
Preferably, the connecting shaft is provided with a plurality of positioners, the support rod is provided with a plurality of fixed mounting knobs mounted with the positioner.
