#Finned tube radiator #What are the appropriate maintenance methods? Clean and inspect the finned tube radiator regularly. Remove adhesions such as build-up, coking, and water rust layers in the tube in a timely manner. Check in time whether the adhesion between each finned tube and the rubber gasket is tight, and whether the rubber gasket itself is defective, so as to prevent leakage caused by degumming and damage of the rubber gasket. When the finned tube radiator is not working, it can be filled with water in the inner cavity, which can reduce the corrosion of the inner cavity. Perhaps when the water in the pipe is drained, the air compressor is used to blow the water in the pipe until it is completely boring. Otherwise, the air with the necessary humidity will fill the tube cavity, and the rate of corrosion will accelerate. Check the appearance and assume that when the finned tube radiator is distorted, it must be corrected in time to make the ventilation smooth and unimpeded. When it is not used for a long time, it should be sealed and stored. to reduce dust buildup on the surface of the radiator. Prevent dust from occurring inside the radiator, but it is not easy to deal with. When it is used again in the later stage, it is best to clean it up again. Prevents aluminum radiators from contact with something alkaline (PH>7) or with a high chloride content. To prevent alkali corrosion and chloride corrosion.
