No Disney,
Without Mickey and Minnie Mouse,
The whole childhood seems incomplete.
As a qualified weaver girl,
Must conquer the bear child with craftsmanship,
Today's version of the oversized Mickey is not difficult to hook up,
But it takes a lot of money and effort,
It is absolutely impossible without perseverance.
Don't tell you,
Xiaobian look at all the instigation,
So kick this ball to you,
True love powder hook up!
Tools, consumables and main parameters: the tool uses a 1.75mm crochet needle, although not a large model, but the finished product is still 42 cm high, it can be said that the scale is quite amazing. The eyes are oval, there are obvious white dots on closer inspection, the size is unknown, and it may take effort to find it. In addition to the required wire, pearl cotton, embroidery needle and embroidery thread, a thicker styling strip is also prepared to fix the huge head. Then prepare a little white and red non-woven fabric for details such as eyes and mouth, respectively. Also, don't forget the two buttons of the right size.
The body and head are joined together and crocheted from the bottom upwards. Remember to plug the cotton with the hook so that the overall effect will be more uniform and firm. The shaping strip at the neck can use the stable wire, etc., after all, the head is really large, especially after the plug, it can be imagined bulky. If the stylus is not done in place, it will really collapse completely.
The head is woven around the styling strip, which is also plugged with cotton on the side of the hook, and the styling strip is basically located in the center during the process. Wrapped tightly with soft cotton, not only can it effectively avoid safety hazards, but also it is convenient to pose in the later stage.
This circle of short needles on the heel is difficult to operate, and it is necessary to ensure its circular structure as much as possible. If you really can't figure it out, you can also leave the foot alone to crochet needles into a ring, and then leave the thread to stitch to the heel after the crochet is completed.
The connection of the fingers is more conventional, that is, the hook is made in an orderly circle around the external needles of several parts of the hook. Here, because the length of each finger is not equal, it is simply marked with label paper, which can be imitated.
Each ear is made up of a combination of two basic pieces, and remember to align the two backs when connecting. If you are afraid that it is too big and the stability is not good, you can also consider adding cardboard for reinforcement.
The eyes are the more colorful places of the whole doll, including the part where the bottom and the cheek are connected, the finished eyeball and the white washer under the finished eyeball, etc., and the black line is used to cover the edge modification later, which is highly layered. The shaping of the cheek is the most important thing, you need to use the positioning needle to position first, and then carefully plug the cotton stitching, do not go out of shape.
The assembly of facial details can refer to the drawings, the basic size and positioning are here! In addition, the tail is very distinctive, from thick to thin, the details are almost perfect, which is very worth learning.
The shorts are designed to hook the whole and then divide the legs, and each leg in the illustration occupies 32 needles. After completing the two legs separately, align the needles at the crotch and stitch them.
Today's illustration is shared here, more cute illustrations, we will not see tomorrow. Love you guys, oh