No prize quiz! Guess who this is!
Does it feel like a domestic star? This one is more like!
The sheep announced the answer ha, which was once known as the plastic surgery template Gao Yunzhen.
Do you remember this picture, widely circulated, and it is almost impossible to see the plastic surgery cases of plastic surgery traces.
Looking at the current appearance, there should be quite a lot in the middle.
The sheep couldn't help but think of the video of her face collapsing before.
It looks like the face fill has not yet recovered, and it is likely that multiple projects have been done at the same time, and the whole face is very swollen.
But fortunately, the silhouette and facial features are still online.
So the sisters know that they must space different projects and avoid the recovery period, otherwise it is easy to have such a problem.
Today, the lamb will arrange a wave of recovery period for you to the medical beauty project, full of dry goods, and be sure to collect Oh~
First classify the medical aesthetic projects
Epidermal layer: brush acid, haifeixiu, hyaluronic acid introduction, etc
Photoelectric: photon rejuvenation, ultra-picosecond, Fotona4D, etc
Injection: water light needle, hyaluronic acid, collagen, hi body, botulinum toxin, etc
RF class: Thermage, Geratti, etc
Ultrasound: Ultrasonic cannon
Two more big items are taken out separately: line carving, facial fat filling
A little science: the epidermal layer project is equivalent to waking up your little face, if you want to do it, you must put it in the front.
The interval between items of the same category
Optoelectronic projects (photonic rejuvenation, picoseconds, ultra-picoseconds, Fotona 4D, etc.)
General optoelectronic projects do not cause obvious skin damage, and the recovery period is short.
However, due to the fact that deep tissue changes take a period of time to promote collagen regeneration and tissue tightening, too frequent treatment may cause damage, so the interval is recommended not less than 1 month.
If the blasting pattern of the picosecond project is operated, causing significant lesions and causing skin scabs, it is necessary to be separated by 3 months or more.
Injection items (water light needle, botulinum toxin, hyaluronic acid, etc.)
The lamb takes out the water light needle here, because the water light needle is generally only injected into the superficial layer of the skin, which will cause superficial skin lesions throughout the body.
If the machine light needle can be carried out together with other injection items, it is necessary to strictly avoid water for 48 hours after injection, and the interval between injections is not less than 1 month.
If the hand injection is recommended to recover from the local wound and then carry out other items, oh, because the hand playing method is more than the amount of machine injection, the interval can be extended to 3 months.
At the same time as the superficial injection of water light needles, other injection items can be selected, such as black circles filled with hi body, hyaluronic acid filling of the nasal base, and botulinum toxin injection of masseter muscles.
If there is overlap in the injection area, leave the items that are forbidden to massage in the back.
For example, if facial hyaluronic acid and expression muscle toxin are injected at the same time, it is necessary to first do a deep hyaluronic acid filling that requires kneading plasticity, and then perform botulinum injection.
Large-scale anti-aging: RF projects (Gerathi, Thermage) / Ultrasound projects
Rerati: Because the therapeutic energy and deep heating are relatively low, most of them are done according to the course of treatment to achieve better results, 4-6 times a year, with an interval of no more than 2 months.
Thermage: The therapeutic energy and deep heating are higher than the heatlati, the local collagen regeneration cycle is also longer, the first time to do thermage, at least 2 times in the first year, the interval is 6-8 months.
After that, if the maintenance treatment is not less than once a year, the interval can be 8-10 months.
Sonic cannon: 1-2 times a year, each time at an interval of more than 3 months
Intervals between different categories of items
Optoelectronic projects VS injection projects
Photoelectric and then injection: On the same day, the injection project can be carried out.
For example, optoelectronics, water and light needles, and botulinum poison can be carried out on the same day.
But the lamb gives a suggestion Ha, the same day to carry out photoelectric and injection projects is based on your skin as a whole is relatively healthy to do.
It is also not recommended if there is inflammation or allergy in the deep or superficial layers of the skin, because the aesthetic program will still cause a burden on the skin barrier
Injection after photoelectric: at least 1 month after injection treatment and then do photoelectric projects.
Because photoelectric therapy that acts on the deep layers is likely to accelerate the degradation rate of injected drugs, it is necessary to wait for the drug to stabilize the form and position as much as possible under the skin.
Like the main component of the water light needle is hyaluronic acid, the injection level is the superficial layer of the skin, the heat of the photoelectric project is easy to affect this level, the thermal effect will accelerate the decomposition of hyaluronic acid, resulting in the accelerated disappearance of the effect of the water light needle.
(In other words, if you do the photoelectric project immediately after the injection of the water light needle, the dissolution rate of the injected drug will be accelerated, and the money will be spent in vain.) ）
Optoelectronic projects VS RF/ultrasound projects
Photoelectric and then RF/ultrasound: after 1 month
First RF / ultrasound and then photoelectric: it is recommended that the minimum interval is more than 1 month, and then do Ha ~ after the effect of large anti-aging projects is stable
Injection projects VS RADIO FREQUENCy/ultrasound projects
If it is the first RF/ultrasound, it is theoretically possible to inject water light needles or botulinum toxin on the same day.
But！ Theory is theory, and reality still depends on its own situation.
For example, just after doing Thermage, it is possible to do water light needles, because the Treatment of HeatMaggi itself will cause a lot of lack of water in the skin, and the water light needles can just improve the water retention ability of local skin, one plus one is greater than two Oh~
However, if it is a hyaluronic acid/botulinum contour injection class, it is not recommended to do it immediately!
Because high-temperature radiofrequency projects generally have swelling or recovery periods, and the time when collagen is being rebuilt, after thermage has an effect, it can better help doctors choose the appropriate injection dose and location.
Therefore, the lamb recommends doing filler injections at least 3 months after doing thermage.
If you do shallow injection projects first, such as water light needles, it is best to do RF projects after 1 month.
If you inject hyaluronic acid, you need to do a high temperature deep anti-aging project after at least 2 months of intervals to avoid too high a heat affecting the maintenance time of hyaluronic acid (the meaning of saving money for you, understand no).
Facial large project intervals
Line carving
XiaoYang first explained here for the line carving: regular hospital + professional doctors operating line carving, is a good way to fight aging of 30/40 + big sisters, oh, even the queen of the year before the Spring Festival Gala is done line carving.
So 1. Young little sister does not need to do 2. Compliance is the most important!
The principle of line carving is to use physical absorbable threads like ropes to restore the facial tissues that have become loose and displaced with aging to their original positions.
The interval between the line carvings themselves is 3-5 years before the next time can be done.
The minimally invasive medical aesthetic project of line carving, after the recovery period of 3-6 months has passed, XiaoYang recommends doing light medical aesthetic projects (such as Thermage, Photons).
Individual deep, high-energy aesthetic projects (such as ultrasound cannons) require longer intervals, about 8 months.
Projects like the water light needle can also be operated after a 2-week recovery period, and there is no need to worry about whether it will be tied to the inside of the line, because it is not a level at all
Facial fat filling
This diagram is very clear, the left is the depression produced by tissue atrophy, basically fat filling can be solved. The right is basically a local laxity caused by the relaxation of facial tissues, which can be solved by line sculpting.
More and more treasures are beginning to like facial fat filling, after all, their fat is safer and longer in terms of rejection and presentation effect, the only drawback is that it needs to be filled several times to achieve the perfect effect you want.
Fat injection interval and line carving is the same, after experiencing a complete recovery period, about 3-6 months later, after the location of local fat and the amount of regeneration are basically stable, you can consider other light medical aesthetic projects