When driving on a rainy day
It must be inseparable from the hard work of the wiper
But if used improperly
Easy to cause damage to the wiper
Makes the wiper unclean and leaves water marks
Thus affecting driving safety
Wiper those things, let's find out
How to use the wiper correctly?
After starting the vehicle normally
When the lever is pulled towards the body, the cleaning solution can be sprayed
When you release the lever for more than 1 second, stop the ejection
The wiper will scrape the water two or three more times to clean the windshield
Then stop
How can I extend the life of my wiper?
1. Before scraping, spray glass water first to make the glass fully lubricated and avoid wiping when the windshield is dry.
2. Clean up the sand dust, leaves and other debris on the surface of the windshield in time.
3. It is recommended to use a clean wet rag to clean the front and rear windshields and wiper strips regularly according to the use of the use of the windshield (such as once a week).
Why do wipers have water marks?
Wiper strips are rubber products
When there is sand and debris on the surface of the glass
Because the dust is much harder than the wiper strip
At this time, if the wiper is turned on
It is easy to cause wiper tape to be scratched and worn
Causes water marks when the wiper is scraped
If the wiper strip is checked, the raindrops are still not clean
It may also be that the wiper strip is unevenly stressed and the service life expires
Or it is caused by the aging of the wiper
It is recommended that you go to the nearest Jinan Guangqi Honda New Guangyuan special store to check and repair
Replace the wiper with genuine supplies