1. The water purification float is isolated by the wall of the water tank or the rest of the components, and the water inlet floating bucket needs to be appropriate.
2, the toilet filter is blocked, you need to remove it and clean it up, and then restore it to its original state.
3, the inlet water pontoon is too low, you need to put it to the appropriate height.
4, there is debris between the inlet float and the water tank, can not be run up and down, you need to dispose of the debris and to a suitable position.
5, debris to the water purification parts against, you need to remove the return valve and clean up, and then put back on it.
