Your safety is connected to your family
Safety responsibilities are heavier than Tarzan
As the weather gets colder, the windshield is prone to fog
Seriously affected the driving line of sight
Fogging reasons: the temperature difference between the inside and outside of the car is large, the low temperature outside the car will cause the front windshield to be cold, and when the warm and humid air inside the car encounters the cold front windshield, it will be dethermotherized and liquefied, resulting in fog.
So I want to remove fog
You have to reduce the humidity and temperature of the air inside and outside the car first
Or raise the front windshield temperature
Today I will share with you a few tips to solve the fogging problem
01
Cold air defogging
The most fundamental reason for the fogging of the window is that the temperature difference between the inside and outside of the car is too large, and the outside is cold and the inside is warm, so it causes the window to fog.
Therefore, if you open the cold air to remove fog, you can quickly dry the water vapor on the windshield. Therefore, it is ideal to urgently remove fog during the driving and use cold wind to blow.
Although the effect is good, but the cold is also true, use it as appropriate during the cold winter period!
02
Warm air defogging
This method is suitable for use before driving or when parking.
Using a warm air to remove fog, the fog on the glass of the car will become heavier and heavier at the beginning (so it is not recommended to use it during driving), but after a while the fog will be dried by the warm air. And because the water vapor is gone, there will be no fog in the windows for a long time, and the interior of the car will also be warmer and a lot.
03
One-click defogging function
Maybe you also have a "one-button de-fog button" on your car, but you don't know it! If your car has this function, then defogging it!
The "one-button defogging button" is generally located on the center console of the car, and when the window fogs, just press "FRONT" to remove the fog from the front windshield.
If you need to observe the rear when reversing, you can press the "REAR" button to remove the fog from the rear windshield.
04
Detergent class anti-fog method
Dilute with dish soap in the ratio of 1:6 with water, and then use a sponge to evenly apply to the fogging glass, and after drying, then wipe the traces clean with a dry cloth, which is not only convenient for the defogging effect is also very good.
In addition, wiping the car window with toothpaste and soapy water can also have the same effect.