Pulverizer is one of the most important links in our organic fertilizer equipment, our common pulverizers are horizontal pulverizer, semi-wet material shredder, double stage pulverizer and so on.... Today we will take a look at the hammer crusher.
Hammer mills mainly rely on impact to crush materials. When the material enters the hammer mill, it is crushed by the impact of the high-speed rotating hammer head.
Organic fertilizer process diagram
The pulverized material obtains kinetic energy from the hammer head of the hammer mill and rushes to the baffles and sieve strips in the frame at high speed. At the same time, the materials collide with each other, grinding many times, and materials smaller than the gap of the sieve strip are discharged from the gap. The impact, grinding and extrusion on a single larger material screen are crushed again, and the material is crushed from the gap by the hammer head of the hammer crusher.
Thus obtaining the desired granularity of the product.
(1) The working hammer head adopts the new process casting, wear-resistant and impact-resistant.
(2) The required granularity can be adjusted according to customer requirements.
(3) Hammer break the body structure seal to solve the problem of dust pollution and dust leakage in the crushing workshop.
(4) The overall design is beautiful, the structure is compact, the wearing parts are few, the maintenance is convenient, and it is an upgraded product. Uses: Suitable for cement, chemical, electric power, metallurgy and other industrial sectors in the crushing of hard materials, such as limestone, slag, coke, coal and other materials. A hammer crusher is a machine that crushes large solid raw materials of the required size. The hammer crusher is composed of coarse crushing, fine crushing, wind conveying and other devices, and the purpose of the hammer crusher is achieved through high-speed impact. The use of wind energy for a single shredding eliminates the traditional screening process. Mainly used in mining, building materials and other industries.
Track tipping machine
Below is our detailed analysis of the hammer crusher equipment.
Performance characteristics of hammer milling equipment
1。 Strong production capacity, can meet the production requirements of most users.
2. Wide range of applications. The whole machine is made of stainless steel and can meet a number of industry standards. The grinding chamber is equipped with a water-cooled jacket to meet the grinding requirements of most heat-sensitive materials.
3. No pollution, low noise, separately configured between the aggregate and dust collection room, so that the dust is fully collected, can meet the user's requirements for cleanliness; the whole maneuver is well balanced, and the noise is greatly reduced.
Precautions for the use of hammer mill
1。 When the main engine of the hammer mill is in normal operation, the motor can be started and put into production.
2. Before using the hammer shredder, check whether the appearance of the shredder is damaged during transportation and whether the random data is complete.
3. Before turning on the power of the hammer mill, please confirm whether there is iron foreign matter in the machine cavity, prevent the hammer mill from cutting, and manually turn the flywheel for more than one turn. For safety reasons, manual knife movement is prohibited.
4. Note: The hammer shredder host cannot be reversed when it rotates, otherwise it will cause serious equipment accidents such as fixed knife and left and right maze damage.
Maintenance of hammer milling equipment
1. The hammer mill has a large workload, and it is necessary to frequently check the tightness of the transmission V-belt, and the transmission of the moving knife is only stable and reliable.
2. The hammer mill runs for about 500 hours. Please inspect the left and right main bearings, clean them if necessary, add an appropriate amount of grease or replace all greases.
Semi-wet material crusher
3. According to the characteristics of the material, the normal use time of the hammer mill tool is different. If there is wear, sharpen the tool in time. When the tool is mounted, the rotating tool is fixed. After the fixed tool is only slightly fixed, adjust the four top tool adjustment screws, and the clearance between the rotating tool and the fixed tool is maintained at 0.2-0.3.
Then, tighten the fixed knife screws, lock the adjustment screws, and complete the knife installation.
The above is our related content about the hammer mill, I hope to help you who are paying attention to organic fertilizer equipment