Zehui lecture hall: use of magnesium oxide for FRP

As we all know, the use of magnesium oxide is very extensive, and every industry has a figure of magnesium oxide, and the role is different. The main role of magnesium oxide in FRP is thickener, curing time adjuster, and enhancing brightener. The addition of magnesium oxide to FRP can greatly improve the quality of FRP. Therefore, compared with the same type of FRP, FRP produced by magnesium oxide raw materials will be more popular in the market. However, not all types of magnesium oxide can be added to FRP, and only the use of FRP special magnesium oxide can achieve the desired effect.

　　Since the glass is transparent, it is easy to break, and although the steel is relatively hard, the steel is opaque. Therefore, it appears in the more popular building material fiberglass. The benefits of FRP are well understood, but everyone knows that in the process of producing FRP, there is one thing that cannot be reduced, that is, FRP magnesium oxide. FRP magnesium oxide in the production process, need to change the indicators of magnesium oxide according to the needs of FRP manufacturers, in general, active magnesium oxide is easier to use in the FRP industry, and magnesium oxide enterprises also need to adjust the level of activity with the change of climate. If the activity is relatively high, then it will cause the FRP to thicken faster, and the low activity will cause the FRP sheet to be soft, it is not easy to dry in the process of drying, generally in the winter, the required magnesium oxide activity is slightly higher, and the summer needs to be slightly lower. If there is a difference between the activity and the indicators required by the customer, it will affect the reaction speed of FRP and cause serious quality problems for the customer's production products.

　　The above is some introduction to magnesium oxide for FRP, I hope to help you, you can customize the magnesium oxide suitable for your own products as needed.