Ankang 160 hp machine with Ricardo technology 6 gear box Strong power is not afraid of complex road conditions
In terms of power, this refrigerated version of the Bell Q6 is equipped with Anhui Cummins HFC4DE2-2E engine, displacement 3L, in line with the latest light truck opinion draft standards, if you want to choose van or rail car, You can also choose an Ankang engine with a displacement of 2.5L, the maximum output of these two engines is 160 horsepower (117 kW), the difference is that the Ankang 2.5L machine is optimized on the basis of the 3L machine, the maximum output torque is 40 Nm more than the 3L machine, which is 460 Nm, and the peak torque of the 3L machine is 420 Nm.
The transmission system is matched by a 6-speed manual transmission using Ricardo technology, which has significantly improved fuel saving capacity and transmission efficiency compared to before through the blessing of Ricardo technology, and the entire gearbox housing is made of aluminum alloy, which can effectively help the vehicle to reduce weight.
In terms of chassis, chassis, this car chooses a 5.5-ton American AAM brand rear axle with a speed ratio of 4.33, and Anhui Cummins power and all-aluminum transmission composed of gold power chain transmission efficiency of more than 99%.
In terms of tires, the car chose a Giti tire with a specification of 7.50R16LT, while the specification of 7.00R16 was also available. Then combining these three parameters, through the truck home speed calculator we can know that when the speed of the vehicle engine is at 1600-2400RPM, the vehicle speed can reach 70-105km/h.