Recently, there was a video circulating on the Internet: a ping-pong ball was firmly glued to a piece of Victas set of glue, motionless. With the strong adhesion of this rubber, many netizens have said that they must buy. The powerful stickiness that appeared on the body of Crazy 3 many years ago has reappeared in the jianghu, and it is still a coat! Everyone is full of expectations: when the viscous and high-elastic sponge is combined, what kind of spark will burst out?
This set of glue is the Triple Double Extra (TD for short). At the recent All Japan Championships, Niwa Takashi used it in the backhand position. Well, this one is a bit weird. When the Butterfly D09c came out, everyone naturally thought it was a forehand glue. High viscosity and high hardness Well, playing forehand is just right. Moreover, most people's backhand position has become accustomed to astringent sleeves, even if some use sticky sleeves, it is soft and low-hardness. But this TD, obviously not soft. Mud teacher uses the highest hardness adhesive sleeve TD as a backhand, won't it be too slow? Is it to strengthen the arc and control?
Let's first take a look at the hardness and basic properties of The Ribbon series of Victas.
The recommendation of this suitable object, if it is not Victas showing a high-pressure grid, it is an underestimation of the adaptability of the majority of Chinese golfers to high-hardness adhesive sleeves! And, obviously, we are most interested in super stickiness, what idols (mud teachers) use, we must also use ah!
That's right, today I'm going to test the color of this TD.
First, this does not seem to be a traditional sticky sleeve
What should a traditional adhesive sleeve look like? High viscosity, small force ball does not go. It doesn't go much under medium strength. After a strong force, it begins to "move", generally to fill the oil or glue to make it. Rotate to drive speed.
What about this piece of TD? Small strength does not go, medium strength begins to lively, ah, elasticity is very good, the speed is also very fast. I just brushed the inorganic glue again. Although this elasticity and speed are a little slower than the top butterfly astringency Tenergy, it is a sticky rubber surface after all, but it is very close. Is it the most elastic and fastest adhesive I have ever played? Most likely (without filling).
Tear off the adhesive protective film, 74.3g whole sheet, attached to the author's horizontal plate surface, about 51g, slightly heavier. For the average person, it is more appropriate to have a forehand. If you want to tap, the hardness should be soft, and you can consider TR. Because tees don't weigh much less.
The author did not play the softest TR. But according to the picture observation, TD and TE are both high-density sponges like Crazy 3, while TR is more like a cake sponge with bigger foam. TR is naturally a soft bullet, but TD and TE are still not weak. With this TD in my hand, I was sharp.
Second, high elasticity, strong viscosity, high density sponge
This series is produced in China. Therefore, the stickiness of the rubber surface is naturally different, and it is really sticky to the touch, reminiscent of the crazy 3 rubber surface of many years ago. Now the Frenzy 3 is reducing viscosity in order to speed up. TD did the opposite.
It does feel hard in the hand. Because the genre is different from the Berserker series, it's hard to compare how hard it is to approximately Berserk 3. But there is 39-40 degrees of that kind of support. This high-density sponge makes you feel that the upper limit of the force is very high, and it will not only be able to pull multiple plates steadily, but a plate explosion can be achieved.
When bouncing the opponent's arc ball, it is the easiest to show this high elasticity. It's a little easy to play out of bounds. When attacking fast, thanks to high elasticity, one speed is fast enough. Combining high viscosity and elasticity, TD is truly remarkable.
Third, the actual combat test
1. Station control:
This highly viscous rubber surface, the ball control is as delicate as the Wild Flutter 3. It is not easy to swing short and not to be high, and it is easy to split long. The control aspect can be said to be handy.
2. Semi-introduction of the lift:
At first, I will feel that the rubber is a little hard, but after adapting to it for a while, it is still very easy to get started. Because this glue surface is sticky enough, hanging a board with the backhand or pulling a plate high with the forehand, the arc ability is really strong, and it is very good to go on stage. However, here is a little bit of a gap with The Wild Fly 3: the spin of the Wild Fly is a little stronger, more top. Although TD is also super sticky, the rotation of this plate lift is not so strong.
3. Pull punch:
When pulling punches, without glue, it is obviously much sharper than crazy 3. A lot faster. Brushing the inorganic glue again, not filling the oil and laying the foundation, can pull out the high speed, and it can be seen that the internal energy sense is leveraged. Once the glue is filled, the effect is even more extraordinary, approaching the top astringent speed. But generally we don't do that. Because this is the inner rubber of one side. Pure inorganic is pretty good.
In the process of pulling, I felt the high support of TD, especially the strong arc ability, hey, really quite stable. In terms of rotation performance and double jump, the pressure is still not as strong as the frenzy after filling. Here we found the biggest difference between TD and Crazy 3: TD is still a high-speed style, relying on speed to restrain opponents, rather than relying mainly on rotation like Crazy 3. It doesn't spin as much as the Wild 3, but it's much sharper. I have to say that the concept is still different: although it is also made in China, the core of the coat is still speed first.
Of course, in the era of plastic balls, high-speed attack and defense is the main theme. It's getting harder and harder to score points by pulling a high hanging that turns a lot, unless you're facing a weaker opponent... Otherwise, just turn, too slow, will still be pulled back.
4. Afterburner in defense and borrowing:
Spinning, TD isn't up to par with The Wild 3 yet. Speed, exceeded. Defensively, it is also very solid. This sponge sweet zone is pretty big. Especially in the use of force, such as hitting the opponent's arc ball, it is handy. It's fast, it's directional, and it's pretty steady. Suddenly, the author understood the idea of using TD as a backhand by The mud teacher: this rubber is really not a traditional and slow and sticky domestic rubber, it is indeed not bad, and the internal energy sense is the leader in the adhesive sleeve. It is very cool and stable to tear up, and the bullet is crisp and fast.
TD this hardness is placed in the backhand position, which is fine for the author who is accustomed to high hardness, but for many golfers, IT or TR may be more suitable. But it is undeniable that in the hands of professional players, there is no problem with TD with backhand. There is support, there is ball holding, and there is high elasticity. The forehand position is still a bit different from the Wild Flutter 3. It's not that spinning, but it's fast enough. For amateur golfers who require a board to be pulled around very much to restrain their opponents, The Wild 3 should be a more appropriate choice. For golfers who want to pull out the threat of speed, or want to pull and attack, TD and softer TE will be quite a good choice. The author also believes that this hardness, in fact, most amateur golfers can adapt to it, can play well.
Operations personnel: Dark Horse