該文檔為制作lnmp一鍵安裝腳本而寫，指令比較少注釋，基本複制粘貼一步到底，也是為友善大家制作一鍵安裝腳本。
系統環境：centos5.8 64位
1、nginx安裝
1.1 安裝nginx所需的pcre庫
pcre全稱(perl compatibleregular expressions),安裝pcre庫是為了使nginx支援http rewrite子產品
cd /usr/local/src
wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.30.tar.gz
tar zxf pcre-8.30.tar.gz
cd pcre-8.30
./configure
make && make install
1.2 安裝nginx
wget http://nginx.org/download/nginx-1.2.9.tar.gz
useradd nginx -s /sbin/nologin -m
tar zxf nginx-1.2.9.tar.gz
cd nginx-1.2.9
./configure --user=nginx --group=nginx --prefix=/application/nginx-1.2.9 --with-http_stub_status_module --with-http_ssl_module
ln -s /application/nginx-1.2.9 /application/nginx
ll /application/nginx
echo /usr/local/lib >>/etc/ld.so.conf
ldconfig
/application/nginx/sbin/nginx -t
#檢查文法
/application/nginx/sbin/nginx
#啟動nginx
1.3 測試nginx
2、mysql安裝
2.1 安裝mysql軟體
wget http://mysql.ntu.edu.tw/downloads/mysql-5.1/mysql-5.1.68.tar.gz
user add -s /sbin/nologin -m mysql
tar zxf mysql-5.1.68.tar.gz
cd mysql-5.1.68
./configure \
--prefix=/application/mysql5.1.68 \
--with-unix-socket-path=/application/mysql5.1.68/tmp/mysql.sock \
--localstatedir=/application/mysql5.1.68/data \
--enable-assembler \
--enable-thread-safe-client \
--with-mysqld-user=mysql \
--with-big-tables \
--without-debug \
--with-pthread \
--with-extra-charsets=complex \
--with-readline \
--with-ssl \
--with-embedded-server \
--enable-local-infile \
--with-mysqld-ldflags=-all-static \
--with-client-ldflags=-all-static
cp support-files/my-small.cnf /etc/my.cnf
#mysql配置檔案，預設存放在support-files路徑下，但mysql調用的配置檔案為/etc/my.cnf
ln -s /application/mysql5.1.68 /application/mysql
2.2 初始化mysql資料庫
mkdir -p /application/mysql/data
chown -r mysql /application/mysql
/application/mysql/bin/mysql_install_db --basedir=/application/mysql --datadir=/application/mysql/data --user=mysql
#初始化mysql資料檔案，--basedir為資料庫目錄 --datadir為建立資料庫和表的存放地
2.3 啟動mysql
方法一：
cp support-files/mysql.server /application/mysql/bin/
chmod 700 /application/mysql/bin/mysql.server
/application/mysql/bin/mysql.server start
/application/mysql/bin/mysql.server stop
方法二：
/application/mysql/bin/mysqld_safe --user=mysql &
方法三：
cp support-files/mysql.server /etc/init.d/mysql
chmod 700 /etc/init.d/mysql
/etc/init.d/mysql start
2.4 mysql測試
mysqladmin -u root password'123456'
mysql -uroot -p123456 -e "select version();"
3、php安裝
首先需安裝php相應的庫檔案
3.1 檢查php所需lib庫
rpm -qa zlib libxml libjpeg freetype libpnggd curl libiconv zlib-devel libxml2-devel libjpeg-devel freetype-devel libpng-devel gd-devel curl-devel
如果安裝作業系統時未選擇x software development軟體包，則可能沒有上述lib庫，可以通過下面指令補裝
yum groupinstall "x software development"
3.2 安裝libiconv庫
wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.14.tar.gz
tar -zxf libiconv-1.14.tar.gz
cd libiconv-1.14
./configure --prefix=/usr/local/libiconv
make
make install
cd ../
3.3 安裝libmcrypt庫
wget "http://downloads.sourceforge.net/mcrypt/libmcrypt-2.5.8.tar.gz?modtime=1171868460&big_mirror=0"
tar zxf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8
sleep 2
/sbin/ldconfig
cd libltdl/
./configure --enable-ltdl-install
cd ../../
3.4 安裝mhash加密擴充庫
wget "http://downloads.sourceforge.net/mhash/mhash-0.9.9.9.tar.gz?modtime=1175740843&big_mirror=0"
tar zxf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
sleep 2
這兒為32位系統的庫檔案連結
rm -f /usr/lib/libmcrypt.*
rm -f /usr/lib/libmhash*
ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1/usr/lib/libmhash.so.2.0.1
ln -s /usr/local/bin/libmcrypt-config /usr/bin/libmcrypt-config
這兒為64位系統的庫檔案連結
rm -f /usr/lib64/libmcrypt.*
rm -f /usr/lib64/libmhash*
ln -s /usr/local/lib/libmcrypt.la /usr/lib64/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib64/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib64/libmcrypt.so.4
ln -s/usr/local/lib/libmcrypt.so.4.4.8 /usr/lib64/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib64/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib64/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib64/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib64/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib64/libmhash.so.2.0.1
3.5 安裝mcrypt加密擴充庫
wget "http://downloads.sourceforge.net/mcrypt/mcrypt-2.6.8.tar.gz?modtime=1194463373&big_mirror=0"
tar zxf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8/
3.6 安裝php
php5.2版本需要安裝php-fpm更新檔
php5.3以後版本，源碼中已經内嵌了 php-fpm，不需要安裝更新檔包，隻需要在configure的時候添加編譯參數即可,
wget http://cn2.php.net/get/php-5.3.27.tar.gz/from/this/mirror
tar zxf php-5.3.27.tar.gz
cd php-5.3.27
--prefix=/application/php5.3.27 \
--with-mysql=/application/mysql \
--with-iconv-dir=/usr/local/libiconv \
--with-freetype-dir \
--with-jpeg-dir \
--with-png-dir \
--with-zlib \
--with-libxml-dir=/usr \
--enable-xml \
--disable-rpath \
--enable-safa-mode \
--enable-bcmath \
--enable-shmop \
--enable-sysvsem \
--enable-inline-optimization \
--with-curl \
--with-curlwrappers \
--enable-mbregex \
--enable-fpm \
--enable-mbstring \
--with-mcrypt \
--with-gd \
--enable-gd-native-ttf \
--with-openssl \
--with-mhash \
--enable-pcntl \
--enable-sockets \
--with-ldap \
--with-ldap-sasl \
--with-xmlrpc \
--enable-zip \
--enable-soap \
--enable-short-tags \
--enable-zend-multibyte \
--enable-static \
--with-xsl \
--with-fpm-user=nginx \
--with-fpm-group=nginx \
--with-libevent-dir \
--enable-ftp
ln -s /application/php5.3.27/ /application/php
/bin/cp /usr/local/src/php-5.3.27/php.ini-production /application/php5.3.27/lib/php.ini
#把預設生産配置檔案做為php配置檔案
cp /application/php/etc/php-fpm.conf.default /application/php/etc/php-fpm.conf
#把預設php-fpm.conf.default程序管理檔案改名為php/etc/php-fpm.conf
/application/php/sbin/php-fpm -t
#校驗文法
/application/php/sbin/php-fpm
#啟動php
4、nginx關聯php
4.1 修改nginx相關配置
修改nginx配置（該檔案為nginx預設配置檔案，未修改過），在47行位置，插入下列内容
35 server {
36 listen 80;
37 server_name localhost;
38
39 #charset koi8-r;
40
41 #access_log logs/host.access.log main;
42
43 location / {
44 root html;
45 index index.html index.htm;
46 }
47 location~ \.(php|php5)?$ {
48 fastcgi_pass 127.0.0.1:9000;
49 fastcgi_index index.php;
50 include fastcgi.conf;
51 }
站點目錄為預設路徑，在站點目錄添加php配置
[root@yangrongnginx]# cat >/application/nginx/html/index.php <<eof
<?php
phpinfo();
?>
eof
#上面為php長标簽格式，短标簽格式為(短标簽預設不打開)：
#<?
#phpinfo();
#?>
/application/nginx/sbin/nginx -t
/application/nginx/sbin/nginx -s reload
4.2 測試php連接配接
在浏覽器輸入ip/index.php
5、nginx關聯mysql
5.1連接配接資料庫配置
[root@yangrongnginx]# cat >/application/nginx/html/mysql.php <<eof
//$link_id=mysql_connect('主機名','使用者','密碼');
$link_id=mysql_connect('127.0.0.1','root','123456') or mysql_error();
//$link_id=mysql_connect('127.0.0.1','test','');
if($link_id){
echo "mysql connect issuccessful!";
}else{
echo mysql_error();
}
//是php單行注釋
/* 這是php多行注釋*/
注意連接配接資料庫的使用者名和密碼是否正确
5.2 測試
在浏覽器輸入ip/mysql.php
本文出自 “楊雲” 部落格，請務必保留此出處http://yangrong.blog.51cto.com/6945369/1297922