陶瓷作為金屬基複合材料的強化材料已經有較早的曆史，近些年越來越多的研究者把目光放在了高熵合金上。
用高熵合金強化金屬基複合材料，在韌性、強度、延展性和可加工性等方面，具有比陶瓷強化更大的優勢。
本文，工号002向朋友們推薦高熵合金強化鋁合金、銅合金、钛合金等金屬基複合材料的研究。因為鑄造容易造成金屬基與強化材料分布不均勻，是以重點推薦以金屬粉末、高熵合金粉末為原料的制造方式。如粉末冶金、機械合金化、熔覆等。
高熵合金強化金屬基複合材料相關研究如下
| 金屬基 | 高熵合金粉末 | 導讀 | 序号 |
| 2024 | SiC 、 CoNiFeCrAl0.6Ti0.4 | 粉末冶金 | 1 |
| 2024 | FeCoNi1.5CrCu | 粉末冶金、 熱處理、深冷處理 | 2 |
| 2024 | CoCrFeMnNi | 等離子燒結，機械性能 | 3 |
| 5052 | Al0.6CoCrFeNi | 真空熱壓燒結 | 4 |
| 5052 | Al0.6CoCrFeNi | 等離子燒結 | 5 |
| 5083 | Al0.8CoCrFeNi | 摩擦攪拌，再結晶形成等軸晶 | 6 |
| 5083 | AlCoCrFeNi | 摩擦攪拌，再結晶形成等軸晶 | 7 |
| 5083 | AlCoCrFeNi | 等離子燒結，機械性能 | 8 |
| 5083 | Al0.8FeCoNiCrCu0.5Six | 雷射熔覆 | 9 |
| 5083 | CoCrFeNi | 摩擦沉積 | 10 |
| 6061 | AlFeNiCrCoTi0.5 | 擠壓成形，減少了基體中的微觀結構缺陷 | 11 |
| 6061 | AlCoCrFeNi2.1 | 摩擦攪拌熱處理，機械性能 | 12 |
| 6061 | CoNiFeAl0.4Ti0.6Cr0.5 | 粉末冶金 | 13 |
| 7075 | FeCoCrNiAl | 真空球磨與真空熱壓燒結 | 14 |
| 7075 | Fe1.2NiCrCoAlTi0.8 | 粉末冶金，機械性能 | 15 |
| 7075 | AlCrTiV | 粉末冶金，機械性能 | 16 |
| Al | CuZrNiAlTiW | 機械合金化，等離子燒結 | 17 |
| Al-10Si-Mg | Al0.9CoCrFeNi | SLM | 18 |
| AZ91 | Al0.5CoCrFeNi2 、SiC | 等離子燒結，機械性能 | 19 |
| AZ91D | Al0.5CoCrCuFeNi | 雷射熔覆，耐蝕HEA塗層 | 20 |
| Cu | AlCoCrFeN | 等離子燒結 | 21 |
| Cu | AlCoCrFeNi | 等離子燒結，機械性能 | 22 |
| Cu | Al0.3CoCrFeNi | 機械合金化，燒結 | 23 |
| Cu | AlCoCrCuFe | 摩擦攪拌，機械性能 | 24 |
| Cu | FeCoNiCrAl | 摩擦攪拌，機械性能 | 25 |
| Ti | CoCrFeNiMo0.2 | 燒結 | 26 |
| Ti6Al4V | CoCrFeNiMo | 等離子燒結 | 27 |
| Ti6Al4V | CoCrFeNiMo | 等離子燒結 | 28 |
| W | FeNiCoCrMn | 原位合金化、熱等靜壓 | 29 |
| W | FeNiCoCrMn | 燒結、微波燒結、等離子燒結 | 30 |
1、Microstructure, mechanical properties and machinability of particulate reinforced Al matrix composites: a comparative study between SiC particles and high-entropy alloy particles
2、Microstructure and improved plasticity of (FeCoNi1.5CrCu)p/Al composites subject to adjusted deep cryogenic treatment (DCT)
3、Microstructure and properties of high-entropy alloy reinforced aluminum matrix composites by spark plasma sintering
4、Interface characteristics and mechanical properties of Al0.6CoCrFeNi/5052Al matrix composites fabricated via vacuum hot-pressing sintering and annealing
5、Effect of heat treatment on the interface of high-entropy alloy particles reinforced aluminum matrix composites
6、Friction stir processing of high-entropy alloy reinforced aluminum matrix composites for mechanical properties enhancement
7、AlCoCrFeNi high-entropy alloy particle reinforced 5083Al matrix composites with fine grain structure fabricated by submerged friction stir processing
8、Interface structure and tensile behavior of high entropy alloy particles reinforced Al matrix composites by spark plasma sintering
9、Phase assemblage and wear resistance of laser-cladding Al0.8FeCoNiCrCu0.5Sixhigh-entropy alloys on aluminum
10、Additive manufacturing of an aluminum matrix composite reinforced with nanocrystalline high-entropy alloy particles
11、Properties of AlFeNiCrCoTi0.5 high-entropy alloy particle-reinforced 6061Al composites prepared by extrusion
12、Microstructures and mechanical properties of AlCoCrFeNi2.1/6061-T6 aluminum-matrix composites prepared by friction stir processing
13、Effect of ball milling on microstructure and mechanical properties of 6061Al matrix composites reinforced with high-entropy alloy particles
14、Effects of reinforcement volume fraction on mechanical properties and microstructures of 7075Al matrix composites reinforced by FeCoCrNiAl high-entropy alloy particles
15、AA7075/HEAp composites fabricated by microwave sintering: Assessment of the microstructural features and response surface optimization
16、On the interactions between molten aluminum and high entropy alloy particles during aluminum matrix composite processing
17、Microstructure and properties of aluminium-high entropy alloy composites fabricated by mechanical alloying and spark plasma sintering
18、Microstructure and mechanical properties of novel high-entropy alloy particle reinforced aluminum matrix composites fabricated by selective laser melting
19、Al0.5CoCrFeNi2 high entropy alloy particle reinforced AZ91 magnesium alloy-based composite processed by spark plasma sintering
20、Wear and corrosion resistance of Al0.5CoCrCuFeNi high-entropy alloy coating deposited on AZ91D magnesium alloy by laser cladding
21、AlCoCrFeNi high entropy alloy reinforced Cu-based composite with high strength and ductility after hot extrusion
22、AlCoCrFeNi high entropy alloy reinforced Cu-based composite with high strength and ductility after hot extrusion
23、Modifying element diffusion pathway by transition layer structure in high-entropy alloy particle reinforced Cu matrix composites
24、Influence of AlCoCrCuFe high entropy alloy particles on the microstructural, mechanical and tribological properties of copper surface composite made through friction stir processing
25、Microstructure and properties of FeCoNiCrAl high-entropy alloy particle reinforced Cu-matrix composites prepared via FSP
26、Microstructure and properties of high entropy alloy reinforced titanium matrix composites
27、Duplex strengthening via high-entropy alloy particle addition and in-situ solution strengthening in spark plasma sintering composite materials
28、Multiple strengthening via high-entropy alloy particle addition in titanium matrix composites fabricated by spark plasma sintering
29、Microstructure and mechanical properties of hot isostatic pressed tungsten heavy alloy with FeNiCoCrMn high entropy alloy binder
30、Tungsten matrix composite reinforced with CoCrFeMnNi high-entropy alloy: Impact of processing routes on microstructure and mechanical properties