本站一個伺服器本來是windows 系統,采用ISAPI_Rewrite來進行Url重寫,其中有一個規則是
RewriteRule ^/(.{6})(\d{3})(.+)/php/ http://www.xxx.com/qq$2.apk [NC,L,NU]
中間用到了{6}指前面的字元得複6次,然後平移動linux系統下面,采用nginx 的Rewrite來重寫url 結果加載nginx的時候提示報錯
rewrite ^/(.{6})(\d{3})(.+)/php/ http://www.xxx.com/qq$2.apk break;
找了好久的資源終于在 ken 的文章中找到了解決的辦法
将規則前半部分用英文雙引号包起來即可正常應用
如: rewrite "^/(.{6})(\d{3})(.+)/php/" http://www.xxx.com/qq$2.apk break;
就可以正常解析了
順便就把nginx支援正則式的資源全面整理一下,友善下次使用;
nginx rewrite 僞靜态配置參數和使用例子 附正則使用說明
正規表達式比對 :
~ 為區分大小寫比對
~* 為不區分大小寫比對
!~和!~*分别為區分大小寫不比對及不區分大小寫不比對
檔案及目錄比對,其中:
-f和!-f用來判斷是否存在檔案
-d和!-d用來判斷是否存在目錄
-e和!-e用來判斷是否存在檔案或目錄
-x和!-x用來判斷檔案是否可執行
flag标記有:
last 相當于Apache裡的[L]标記,表示完成rewrite
break 終止比對, 不再比對後面的規則
redirect 傳回302臨時重定向 位址欄會顯示跳轉後的位址
permanent 傳回301永久重定向 位址欄會顯示跳轉後的位址
$args 此變量與請求行中的參數相等
$content_length 等于請求行的“Content_Length”的值。
$content_type 等同與請求頭部的”Content_Type”的值
$document_root 等同于目前請求的root指令指定的值
$document_uri 與$uri一樣
$host 與請求頭部中“Host”行指定的值或是request到達的server的名字(沒有Host行)一樣
$limit_rate 允許限制的連接配接速率
$request_method 等同于request的method,通常是“GET”或“POST”
$remote_addr 用戶端ip
$remote_port 用戶端port
$remote_user 等同于使用者名,由ngx_http_auth_basic_module認證
$request_filename 目前請求的檔案的路徑名,由root或alias和URI request組合而成
$request_body_file
$request_uri 含有參數的完整的初始URI
$query_string 與$args一樣
$server_protocol 等同于request的協定,使用“HTTP/1.0”或“HTTP/1.1”
$server_addr request到達的server的ip,一般獲得此變量的值的目的是進行系統調用。為了避免系統調用,有必要在listen指令中指明ip,并使用bind參數。
$server_name 請求到達的伺服器名
$server_port 請求到達的伺服器的端口号
$uri 等同于目前request中的URI,可不同于初始值,例如内部重定向時或使用index
結合PHP的例子
if (!-d $request_filename) {
rewrite ^/([a-z-A-Z]+)/([a-z-A-Z]+)/?(.*)$ /index.php?namespace=user&controller=$1&action=$2&$3 last;
rewrite ^/([a-z-A-Z]+)/?$ /index.php?namespace=user&controller=$1 last;
break;
多目錄轉成參數
abc.domian.com/sort/2 => abc.domian.com/index.php?act=sort&name=abc&id=2
if ($host ~* (.*)\.domain\.com) {
set $sub_name $1;
rewrite ^/sort\/(\d+)\/?$ /index.php?act=sort&cid=$sub_name&id=$1 last;
}
目錄對換
/123456/xxxx -> /xxxx?id=123456
rewrite ^/(\d+)/(.+)/ /$2?id=$1 last;
例如下面設定nginx在使用者使用ie的使用重定向到/nginx-ie目錄下:
if ($http_user_agent ~ MSIE) {
rewrite ^(.*)$ /nginx-ie/$1 break;
}
目錄自動加“/”
if (-d $request_filename){
rewrite ^/(.*)([^/])$ http://$host/$1$2/ permanent;
}
禁止htaccess
location ~/\.ht {
deny all;
}
禁止多個目錄
location ~ ^/(cron|templates)/ {
deny all;
break;
}
禁止以/data開頭的檔案
可以禁止/data/下多級目錄下.log.txt等請求;
location ~ ^/data {
deny all;
}
禁止單個目錄
不能禁止.log.txt能請求
location /searchword/cron/ {
deny all;
}
禁止單個檔案
location ~ /data/sql/data.sql {
deny all;
}
給favicon.ico和robots.txt設定過期時間;
這裡為favicon.ico為99 天,robots.txt為7天并不記錄404錯誤日志
location ~(favicon.ico) {
log_not_found off;
expires 99d;
break;
}
location ~(robots.txt) {
log_not_found off;
expires 7d;
break;
}
設定某個檔案的過期時間;這裡為600秒,并不記錄通路日志
location ^~ /html/scripts/loadhead_1.js {
access_log off;
root /opt/lampp/htdocs/web;
expires 600;
break;
}
檔案反盜鍊并設定過期時間
這裡的return 412 為自定義的http狀态碼,預設為403,友善找出正确的盜鍊的請求
“rewrite ^/ http://leech.c1gstudio.com/leech.gif;”顯示一張防盜鍊圖檔
“access_log off;”不記錄通路日志,減輕壓力
“expires 3d”所有檔案3天的浏覽器緩存
location ~* ^.+\.(jpg|jpeg|gif|png|swf|rar|zip|css|js)$ {
valid_referers none blocked *.c1gstudio.com *.c1gstudio.net localhost 208.97.167.194;
if ($invalid_referer) {
rewrite ^/ http://leech.c1gstudio.com/leech.gif;
return 412;
break;
}
access_log off;
root /opt/lampp/htdocs/web;
expires 3d;
break;
}
隻充許固定ip通路網站,并加上密碼
root /opt/htdocs/www;
allow 208.97.167.194;
allow 222.33.1.2;
allow 231.152.49.4;
deny all;
auth_basic "C1G_ADMIN";
auth_basic_user_file htpasswd;
将多級目錄下的檔案轉成一個檔案,增強seo效果
/job-123-456-789.html 指向/job/123/456/789.html
rewrite ^/job-([0-9]+)-([0-9]+)-([0-9]+)\.html$ /job/$1/$2/jobshow_$3.html last;
将根目錄下某個檔案夾指向2級目錄
如/shanghaijob/ 指向 /area/shanghai/
如果你将last改成permanent,那麼浏覽器位址欄顯是 /location/shanghai/
rewrite ^/([0-9a-z]+)job/(.*)$ /area/$1/$2 last;
上面例子有個問題是通路/shanghai 時将不會比對
rewrite ^/([0-9a-z]+)job$ /area/$1/ last;
rewrite ^/([0-9a-z]+)job/(.*)$ /area/$1/$2 last;
這樣/shanghai 也可以通路了,但頁面中的相對連結無法使用,
如./list_1.html真實位址是/area /shanghia/list_1.html會變成/list_1.html,導至無法通路。
那我加上自動跳轉也是不行咯
(-d $request_filename)它有個條件是必需為真實目錄,而我的rewrite不是的,是以沒有效果
if (-d $request_filename){
rewrite ^/(.*)([^/])$ http://$host/$1$2/ permanent;
}
知道原因後就好辦了,讓我手動跳轉吧
rewrite ^/([0-9a-z]+)job$ /$1job/ permanent;
rewrite ^/([0-9a-z]+)job/(.*)$ /area/$1/$2 last;
檔案和目錄不存在的時候重定向:
if (!-e $request_filename) {
proxy_pass http://127.0.0.1/;
}
域名跳轉
server
{
listen 80;
server_name jump.c1gstudio.com;
index index.html index.htm index.php;
root /opt/lampp/htdocs/www;
rewrite ^/ http://www.c1gstudio.com/;
access_log off;
}
多域名轉向
server_name http://www.c1gstudio.com/ http://www.c1gstudio.net/;
index index.html index.htm index.php;
root /opt/lampp/htdocs;
if ($host ~ "c1gstudio\.net") {
rewrite ^(.*) http://www.c1gstudio.com$1/ permanent;
}
三級域名跳轉
if ($http_host ~* "^(.*)\.i\.c1gstudio\.com$") {
rewrite ^(.*) http://top.yingjiesheng.com$1/;
break;
}
域名鏡向
server
{
listen 80;
server_name mirror.c1gstudio.com;
index index.html index.htm index.php;
root /opt/lampp/htdocs/www;
rewrite ^/(.*) http://www.c1gstudio.com/$1 last;
access_log off;
}
某個子目錄作鏡向
location ^~ /zhaopinhui {
rewrite ^.+ http://zph.c1gstudio.com/ last;
break;
}
discuz ucenter home (uchome) rewrite
rewrite ^/(space|network)-(.+)\.html$ /$1.php?rewrite=$2 last;
rewrite ^/(space|network)\.html$ /$1.php last;
rewrite ^/([0-9]+)$ /space.php?uid=$1 last;
discuz 7 rewrite
rewrite ^(.*)/archiver/((fid|tid)-[\w\-]+\.html)$ $1/archiver/index.php?$2 last;
rewrite ^(.*)/forum-([0-9]+)-([0-9]+)\.html$ $1/forumdisplay.php?fid=$2&page=$3 last;
rewrite ^(.*)/thread-([0-9]+)-([0-9]+)-([0-9]+)\.html$ $1/viewthread.php?tid=$2&extra=page\=$4&page=$3 last;
rewrite ^(.*)/profile-(username|uid)-(.+)\.html$ $1/viewpro.php?$2=$3 last;
rewrite ^(.*)/space-(username|uid)-(.+)\.html$ $1/space.php?$2=$3 last;
rewrite ^(.*)/tag-(.+)\.html$ $1/tag.php?name=$2 last;
給discuz某版塊單獨配置域名
server_name bbs.c1gstudio.com news.c1gstudio.com;
location = / {
if ($http_host ~ news\.c1gstudio.com$) {
rewrite ^.+ http://news.c1gstudio.com/forum-831-1.html last;
break;
}
}
discuz ucenter 頭像 rewrite 優化
location ^~ /ucenter {
location ~ .*\.php?$
{
#fastcgi_pass unix:/tmp/php-cgi.sock;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
include fcgi.conf;
}
location /ucenter/data/avatar {
log_not_found off;
access_log off;
location ~ /(.*)_big\.jpg$ {
error_page 404 /ucenter/images/noavatar_big.gif;
}
location ~ /(.*)_middle\.jpg$ {
error_page 404 /ucenter/images/noavatar_middle.gif;
}
location ~ /(.*)_small\.jpg$ {
error_page 404 /ucenter/images/noavatar_small.gif;
}
expires 300;
break;
}
}
jspace rewrite
location ~ .*\.php?$
{
#fastcgi_pass unix:/tmp/php-cgi.sock;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
include fcgi.conf;
}
location ~* ^/index.php/
{
rewrite ^/index.php/(.*) /index.php?$1 break;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
include fcgi.conf;
}
Nginx正則式說明
^~ 辨別符後面跟一個字元串。Nginx将在這個字元串比對後停止進行正規表達式的比對(location指令中正規表達式的比對的結果優先使用),如:location ^~ /images/,你希望對/images/這個目錄進行一些特别的操作,如增加expires頭,防盜鍊等,但是你又想把除了這個目錄的圖檔外的所有圖檔隻進行增加expires頭的操作,這個操作可能會用到另外一個location,例如:location ~* \.(gif|jpg|jpeg)$,這樣,如果有請求/images/1.jpg,nginx如何決定去進行哪個location中的操作呢?結果取決于辨別符^~,如果你這樣寫:location /images/,這樣nginx會将1.jpg比對到location ~* \.(gif|jpg|jpeg)$這個location中,這并不是你需要的結果,而增加了^~這個辨別符後,它在比對了/images/這個字元串後就停止搜尋其它帶正則的location。
= 表示精确的查找位址,如location = /它隻會比對uri為/的請求,如果請求為/index.html,将查找另外的location,而不會比對這個,當然可以寫兩個location,location = /和location /,這樣/index.html将比對到後者,如果你的站點對/的請求量較大,可以使用這個方法來加快請求的響應速度。
@ 表示為一個location進行命名,即自定義一個location,這個location不能被外界所通路,隻能用于Nginx産生的子請求,主要為error_page和try_files。
~ 為區分大小寫的比對。
~* 不區分大小寫的比對(比對firefox的正則同時比對FireFox)。
!~ 不比對的
!~* 不比對的
. 比對除換行符以外的任意字元
\w 比對字母或數字或下劃線或漢字
\s 比對任意的空白符
\d 比對數字
\b 比對單詞的開始或結束
^ 比對字元串的開始
$ 比對字元串的結束
* 重複零次或更多次
+ 重複一次或更多次
? 重複零次或一次
{n} 重複n次
{n,} 重複n次或更多次
{n,m} 重複n到m次
*? 重複任意次,但盡可能少重複
+? 重複1次或更多次,但盡可能少重複
?? 重複0次或1次,但盡可能少重複
{n,m}? 重複n到m次,但盡可能少重複
{n,}? 重複n次以上,但盡可能少重複
\W 比對任意不是字母,數字,下劃線,漢字的字元
\S 比對任意不是空白符的字元
\D 比對任意非數字的字元
\B 比對不是單詞開頭或結束的位置
[^x] 比對除了x以外的任意字元
[^aeiou] 比對除了aeiou這幾個字母以外的任意字元
捕獲 (exp) 比對exp,并捕獲文本到自動命名的組裡
(?exp) 比對exp,并捕獲文本到名稱為name的組裡,也可以寫成(?'name'exp)
(?:exp) 比對exp,不捕獲比對的文本,也不給此分組配置設定組号
零寬斷言 (?=exp) 比對exp前面的位置
(?<=exp) 比對exp後面的位置
(?!exp) 比對後面跟的不是exp的位置
(?
注釋 (?#comment) 這種類型的分組不對正規表達式的處理産生任何影響,用于提供注釋讓人閱讀