思科裝置EIGRP配置指令

Cisco(config)#router eigrp 90

Cisco(config-router)#no auto-summary  //關閉自動彙總

Cisco(config-router)#network 12.1.1.0 0.0.0.255

Cisco#show ip eigrp neighbors  //檢視鄰居表

Cisco#show ip eigrp topology  //檢視拓撲表

Cisco#show ip route  //檢視路由表

Cisco(config)#int f0/0

Cisco(config-if)#ip hello-interval eigrp 90 5  //修改hello時間間隔

Cisco(config-if)#ip hold-time eigrp 90 15

Cisco#show ip eigrp interfaces detail

Cisco(config)#router eigrp 90

Cisco(config-router)#passive-interface f0/1  //配置被動接口

Cisco(config-router)#redistribute static  //重分布靜态路由

Cisco(config)#int f0/0

Cisco(config-if)#ip summary-address eigrp 90 172.16.0.0 255.255.0.0  //配置路由彙總

Cisco(config)#router eigrp 90

Cisco(config-router)#variance 1  //配置最優路徑基數

Cisco#debug eigrp packets  

Cisco(config)#router eigrp 90

Cisco(config-router)#eigrp stub   //配置末節路由器

Cisco(config)#key chain k1

Cisco(config-keychain)#key 1

Cisco(config-keychain-key)#key-string abc123

Cisco(config)#int f0/0