20170218 貌似是和breed有關,其作者說明了 AR/QCA 晶片從 U-Boot 更新到 Breed 後請一定記得檢查 MAC 位址是否有效,如果全部是FF,請自行修改!!
http://www.right.com.cn/forum/thread-161906-1-1.html
===============================================================
沒有無線,art也刷了,檢視日志
Feb 14 09:53:30 2017 daemon.notice netifd: radio0 (20805): ifconfig: SIOCSIFHWADDR: Cannot assign requested address
Tue Feb 14 09:53:31 2017 daemon.notice netifd: radio0 (20805): Configuration file: ar/run/hostapd-phy0.conf
Tue Feb 14 09:53:31 2017 daemon.notice netifd: radio0 (20805): nl80211: deinit ifname=wlan0-1 disabled_11b_rates=0
Tue Feb 14 09:53:31 2017 daemon.notice netifd: radio0 (20805): nl80211 driver initialization failed.
Tue Feb 14 09:53:31 2017 daemon.notice netifd: radio0 (20805): wlan0-1: interface state UNINITIALIZED->DISABLED
Tue Feb 14 09:53:31 2017 daemon.notice netifd: radio0 (20805): wlan0-1: AP-DISABLED
Tue Feb 14 09:53:31 2017 daemon.notice netifd: radio0 (20805): hostapd_free_hapd_data: Interface wlan0-1 wasn't started
Tue Feb 14 09:53:31 2017 daemon.notice netifd: radio0 (20805): cat: can't open 'ar/run/wifi-phy0.pid': No such file or directory
Tue Feb 14 09:53:31 2017 daemon.notice netifd: radio0 (20805): Command failed: Invalid argument
Tue Feb 14 09:53:31 2017 daemon.notice netifd: radio0 (20805): Device setup failed: HOSTAPD_START_FAILED
後同過朋友的測試在breed修改正常的MAC位址解決了