1、檢視有多少個IP通路:
awk '{print $1}' log_file|sort|uniq|wc -l
2、檢視某一個頁面被通路的次數:
grep "/index.php" log_file | wc -l
3、檢視每一個IP通路了多少個頁面:
awk '{++S[$1]} END {for (a in S) print a,S[a]}' log_file > log.txt
sort -n -t ' ' -k 2 log.txt 配合sort進一步排序
4、将每個IP通路的頁面數進行從小到大排序:
awk '{++S[$1]} END {for (a in S) print S[a],a}' log_file | sort -n
5、檢視某一個IP通路了哪些頁面:
grep ^111.111.111.111 log_file| awk '{print $1,$7}'
6、去掉搜尋引擎統計的頁面:
awk '{print $12,$1}' log_file | grep ^\"Mozilla | awk '{print $2}' |sort | uniq | wc -l
7、檢視2015年8月16日14時這一個小時内有多少IP通路:
awk '{print $4,$1}' log_file | grep 16/Aug/2015:14 | awk '{print $2}'| sort | uniq | wc -l
8、檢視通路前十個ip位址
awk '{print $1}' |sort|uniq -c|sort -nr |head -10 access_log
uniq -c 相當于分組統計并把統計數放在最前面
cat access.log|awk '{print $1}'|sort|uniq -c|sort -nr|head -10
cat access.log|awk '{counts[$(11)]+=1}; END {for(url in counts) print counts[url], url}
9、通路次數最多的10個檔案或頁面
cat log_file|awk '{print $11}'|sort|uniq -c|sort -nr | head -10
cat log_file|awk '{print $11}'|sort|uniq -c|sort -nr|head -20
awk '{print $1}' log_file |sort -n -r |uniq -c | sort -n -r | head -20
通路量最大的前20個ip
10、通過子域名通路次數,依據referer來計算,稍有不準
cat access.log | awk '{print $11}' | sed -e ' s/http:\/\///' -e ' s/\/.*//' | sort | uniq -c | sort -rn | head -20
11、列出傳輸大小最大的幾個檔案
cat www.access.log |awk '($7~/\.php/){print $10 " " $1 " " $4 " " $7}'|sort -nr|head -100
12、列出輸出大于200000byte(約200kb)的頁面以及對應頁面發生次數
cat www.access.log |awk '($10 > 200000 && $7~/\.php/){print $7}'|sort -n|uniq -c|sort -nr|head -100
13、如果日志最後一列記錄的是頁面檔案傳輸時間,則有列出到用戶端最耗時的頁面
cat www.access.log |awk '($7~/\.php/){print $NF " " $1 " " $4 " " $7}'|sort -nr|head -100
14、列出最最耗時的頁面(超過60秒的)的以及對應頁面發生次數
cat www.access.log |awk '($NF > 60 && $7~/\.php/){print $7}'|sort -n|uniq -c|sort -nr|head -100
15、列出傳輸時間超過 30 秒的檔案
cat www.access.log |awk '($NF > 30){print $7}'|sort -n|uniq -c|sort -nr|head -20
16、列出目前伺服器每一程序運作的數量,倒序排列
ps -ef | awk -F ' ' '{print $8 " " $9}' |sort | uniq -c |sort -nr |head -20
17、檢視apache目前并發通路數
對比httpd.conf中MaxClients的數字差距多少
netstat -an | grep ESTABLISHED | wc -l
18、可以使用如下參數檢視資料
ps -ef|grep httpd|wc -l
1388
統計httpd程序數,連個請求會啟動一個程序,使用于Apache伺服器。
表示Apache能夠處理1388個并發請求,這個值Apache可根據負載情況自動調整
netstat -nat|grep -i "80"|wc -l
4341
netstat -an會列印系統目前網絡連結狀态,而grep -i “80”是用來提取與80端口有關的連接配接的,wc -l進行連接配接數統計。
最終傳回的數字就是目前所有80端口的請求總數
netstat -na|grep ESTABLISHED|wc -l
376
netstat -an會列印系統目前網絡連結狀态,而grep ESTABLISHED 提取出已建立連接配接的資訊。然後wc -l統計
最終傳回的數字就是目前所有80端口的已建立連接配接的總數。
netstat -nat||grep ESTABLISHED|wc
可檢視所有建立連接配接的詳細記錄
19、輸出每個ip的連接配接數,以及總的各個狀态的連接配接數
netstat -n | awk '/^tcp/ {n=split($(NF-1),array,":");if(n<=2)++S[array[(1)]];else++S[array[(4)]];++s[$NF];++N} END {for(a in S){printf("%-20s %s\n", a, S[a]);++I}printf("%-20s %s\n","TOTAL_IP",I);for(a in s) printf("%-20s %s\n",a, s[a]);printf("%-20s %s\n","TOTAL_LINK",N);}'
20、其他的收集
分析日志檔案下 2012-05-04 通路頁面最高 的前20個 URL 并排序
cat access.log |grep '04/May/2012'| awk '{print $11}'|sort|uniq -c|sort -nr|head -20
查詢受通路頁面的URL位址中 含有 www.abc.com 網址的 IP 位址
cat access_log | awk '($11~/\www.abc.com/){print $1}'|sort|uniq -c|sort -nr
擷取通路最高的10個IP位址 同時也可以按時間來查詢
cat linewow-access.log|awk '{print $1}'|sort|uniq -c|sort -nr|head -10
時間段查詢日志時間段的情況
cat log_file | egrep '15/Aug/2015|16/Aug/2015' |awk '{print $1}'|sort|uniq -c|sort -nr|head -10
分析 2015/8/15 到 2015/8/16 通路”/index.php?g=Member&m=Public&a=sendValidCode”的IP倒序排列
cat log_file | egrep '15/Aug/2015|16/Aug/2015' | awk '{if($7 == "/index.php?g=Member&m=Public&a=sendValidCode") print $1,$7}'|sort|uniq -c|sort -nr
($7 ~ /.php/) $7裡面包含.php的就輸出,本句的意思是最耗時的一百個PHP頁面
cat log_file |awk '($7~/\.php/){print $NF " " $1 " " $4 " " $7}'|sort -nr|head -100
列出最最耗時的頁面(超過60秒的)的以及對應頁面發生次數
cat access.log |awk '($NF > 60 && $7~/\.php/){print $7}'|sort -n|uniq -c|sort -nr|head -100
統計網站流量(G)
cat access.log |awk '{sum+=$10} END {print sum/1024/1024/1024}'
統計404的連接配接
awk '($9 ~/404/)' access.log | awk '{print $9,$7}' | sort
統計http status
cat access.log |awk '{counts[$(9)]+=1}; END {for(code in counts) print code, counts[code]}'
cat access.log |awk '{print $9}'|sort|uniq -c|sort -rn
每秒并發
watch "awk '{if($9~/200|30|404/)COUNT[$4]++}END{for( a in COUNT) print a,COUNT[a]}' log_file|sort -k 2 -nr|head -n10"
帶寬統計
cat apache.log |awk '{if($7~/GET/) count++}END{print "client_request="count}'
找出某天通路次數最多的10個IP
cat /tmp/access.log | grep "20/Mar/2011" |awk '{print $3}'|sort |uniq -c|sort -nr|head
當天ip連接配接數最高的ip都在幹些什麼
cat access.log | grep "10.0.21.17" | awk '{print $8}' | sort | uniq -c | sort -nr | head -n 10
小時機關裡ip連接配接數最多的10個時段
awk -vFS="[:]" '{gsub("-.*","",$1);num[$2" "$1]++}END{for(i in num)print i,num[i]}' log_file | sort -n -k 3 -r | head -10
找出通路次數最多的幾個分鐘
awk '{print $1}' access.log | grep "20/Mar/2011" |cut -c 14-18|sort|uniq -c|sort -nr|head
取5分鐘日志
if [ $DATE_MINUTE != $DATE_END_MINUTE ] ;then #
則判斷開始時間戳與結束時間戳是否相等
START_LINE=sed -n "/$DATE_MINUTE/=" $APACHE_LOG|head -n1 #如果不相等,則取出開始時間戳的行号,與結束時間戳的行号
檢視tcp的連結狀态
netstat -nat |awk '{print $6}'|sort|uniq -c|sort -rn
netstat -n | awk '/^tcp/ {++S[$NF]};END {for(a in S) print a, S[a]}'
netstat -n | awk '/^tcp/ {++state[$NF]}; END {for(key in state) print key,"\t",state[key]}'
netstat -n | awk '/^tcp/ {++arr[$NF]};END {for(k in arr) print k,"\t",arr[k]}'
netstat -n |awk '/^tcp/ {print $NF}'|sort|uniq -c|sort -rn
netstat -ant | awk '{print $NF}' | grep -v '[a-z]' | sort | uniq -c
netstat -ant|awk '/ip:80/{split($5,ip,":");++S[ip[1]]}END{for (a in S) print S[a],a}' |sort -n
netstat -ant|awk '/:80/{split($5,ip,":");++S[ip[1]]}END{for (a in S) print S[a],a}' |sort -rn|head -n 10
awk 'BEGIN{printf ("http_code\tcount_num\n")}{COUNT[$10]++}END{for (a in COUNT) printf a"\t\t"COUNT[a]"\n"}'
查找請求數前20個IP(常用于查找攻來源):
netstat -anlp|grep 80|grep tcp|awk '{print $5}'|awk -F: '{print $1}'|sort|uniq -c|sort -nr|head -n20
netstat -ant |awk '/:80/{split($5,ip,":");++A[ip[1]]}END{for(i in A) print A[i],i}' |sort -rn|head -n20
用tcpdump嗅探80端口的通路看看誰最高
tcpdump -i eth0 -tnn dst port 80 -c 1000 | awk -F"." '{print $1"."$2"."$3"."$4}' | sort | uniq -c | sort -nr |head -20
查找較多time_wait連接配接
netstat -n|grep TIME_WAIT|awk '{print $5}'|sort|uniq -c|sort -rn|head -n20
找查較多的SYN連接配接
netstat -an | grep SYN | awk '{print $5}' | awk -F: '{print $1}' | sort | uniq -c | sort -nr | more
根據端口列程序
netstat -ntlp | grep 80 | awk '{print $7}' | cut -d/ -f1
檢視了連接配接數和目前的連接配接數
netstat -ant | grep $ip:80 | wc -l
netstat -ant | grep $ip:80 | grep EST | wc -l
檢視IP通路次數
netstat -nat|grep ":80"|awk '{print $5}' |awk -F: '{print $1}' | sort| uniq -c|sort -n
Linux指令分析目前的連結狀況
netstat -n | awk '/^tcp/ {++S[$NF]} END {for(a in S) print a, S[a]}'
watch “netstat -n | awk ‘/^tcp/ {++S[$NF]} END {for(a in S) print a, S[a]}’” #通過watch可以一直監控
LAST_ACK 5 #關閉一個TCP連接配接需要從兩個方向上分别進行關閉,雙方都是通過發送FIN來表示單方向資料的關閉,當通信雙方發送了最後一個FIN的時候,發送方此時處于LAST_ACK狀态,當發送方收到對方的确認(Fin的Ack确認)後才真正關閉整個TCP連接配接;
SYN_RECV 30 # 表示正在等待處理的請求數;
ESTABLISHED 1597 # 表示正常資料傳輸狀态;
FIN_WAIT1 51 # 表示server端主動要求關閉tcp連接配接;