The printer can also use water cooling

We are all familiar with the printer, one of the necessary office tools for work. From inkjet, needle, laser equipment, to the current popular 3D technology, the development of printers is relatively fast. At the same time of gradual improvement in performance, the price is also reducing, making the office more convenient.

3D printing technology is still far away from us. We are most exposed to printers in daily office. Careful friends will notice that the printer after a long time of work, the printing efficiency is significantly reduced, and the fuselage is easy to get hot, even in emergency to shut down the rest to restore the printing speed. There are many factors affecting the printer, temperature, hardware aging, working time will directly affect the work efficiency of the printer. Replacing old parts, wiping the body to speed up cooling, and turning it off when not in use are common options for smaller printers. But for some large printers, it’s not so easy. On the one hand, large printers should be used at any time.On the one hand, large printer heat dissipation, maintenance inconvenience, high cost.

At present, the main heat dissipation mode of printer is fan heat dissipation, fan heat dissipation cost is low and widely used. But there are some problems such as poor heat dissipation and loud noise. Some netizens have posted funny pictures of people cooling down printers with hoods. Nowadays, the hot water-cooling heat dissipation in the DIY computer market can also be used in the heat dissipation of printers. After years of market application, it has been proved that water-cooling heat dissipation is quiet and efficient, which can ensure the printer to work for a long time, but the efficiency is not reduced. When it comes to water cooling and heat dissipation, many people are confused about water cooling and heat dissipation. In fact, the reason of water cooling and heat dissipation is very simple. Water cooling blocks and heating cores are tightly attached to each other. That way, you don’t have to worry about your printer overheating.

Industrial printers need more heat dissipation, but the heat dissipation principle is the same, grafting water cooling heat dissipation is fully applicable, here do not describe in detail.

Water-cooled can be said to be a new revolution for printer cooling, although it is only used in a small scale, but the application prospect is infinite. With the popularization of heat dissipation technology, it will be applied to production and life more and more.