天天看點

ubuntu 下常見軟體包安裝錯誤

2008-03-11 14:26

//來自forum.ubuntu.org.cn sudo apt-get install 軟體包 這個是更新你指定的軟體包 sudo apt-get update 擷取更新清單 sudo apt-get dist-upgrade 開始更新 ./configure的問題 錯誤: C compiler cannot create executables 原因: 解決:sudo apt-get gcc libc6-dev 錯誤:checking for C compiler default output... configure: error: C compiler cannot create executables 原因: 解決:sudo apt-get install libc6-dev 錯誤:configure: error: C++ preprocessor "/lib/cpp" fails sanity check 原因:gcc的元件沒裝全 解決:apt-get install build-essential 錯誤: Can't find X includes. Please check your installation and add the correct paths! 原因:沒有X的包含檔案 解決:安裝xlibs-dev即可 錯誤: Qt (>= Qt 3.0) (headers and libraries) not found. Please check your installation! 原因:查找提供qt的lib&&headers的軟體包,并安裝之 解決:apt-get install libqt3-headers libqt3-mt-dev 錯誤:in the prefix, you've chosen, are no KDE headers installed. This will fail. So, check this please and use another prefix! 原因:install a KDE application in a Gnome environment。 解決:which basically means its going to want to install a lot of KDE specific packages to work. This 'configure:error' is due to it expecting you to be running KDE and again refers to some 'headers'. sudo apt-get update sudo apt-get install kdelibs4-dev kdelibs4c2a 錯誤:./admin/cvs.sh: 585: autoconf: not found 原因: 解決:apt-get install autoconf 錯誤: *** GTK >= 2.4.0 not installed! *** 原因:沒裝GTK 解決:apt-get build-dep gedit 錯誤:heching for gtk-config... no checking for GTK - version = 1.2.0... no *** The gtk-config script installed by GTK could not be found *** If GTK was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GTK_CONFIG enviroment variable to the *** full path to gtk-config. configure: error: Cannot find GTK: Is gtk-config in path? 原因: 解決:sudo apt-get install libgtk1.2-dev 問題:eclipse中encoding不支援中文 解決:編輯/var/lib/locales/supported.d/local,加一行zh_CN.GBK GBK,執行sudo locale-gen 錯誤:gnome.h: No such file or directory 錯誤: No package 'libpanelapplet-2.0' found 原因: 解決:sudo apt-get install gnome-panel 問題:eva不彈出輸入法 解決:sudo apt-get install scim-qtimm 問題:No package 'gtk+-2.0' found No package 'gtksourceview-1.0' found No package 'libgnomeui-2.0' found No package 'libglade-2.0' found No package 'libgnomeprintui-2.2' found 解決:sudo apt-get install libgtk2.0-dev libgtksourceview-dev libgnomeui-dev libglade2-dev libgnomeprint2.2-dev 問題:No package 'libpanelapplet-2.0' found 解決:sudo apt-get install libpanelappletmm-2.6-dev 編譯安裝 Pidgin 的步驟 1. 下載下傳 Pidgin 的源代碼包 pidgin-2.1.1.tar.bz2 (官方最新的版本)。 wget http://jaist.dl.sourceforge.net/sourceforge/pidgin/pidgin-2.1.1.tar.bz2 2. 安裝編譯 Pidgin 所需的依賴: sudo apt-get install libgtk2.0-dev libxml2-dev gettext libnss-dev libnspr-dev 3. 解壓源代碼包 tar jxvf pidgin-2.1.1.tar.bz2 cd pidgin-2.1.1 4. 編譯 ./configure (建議使用 –help 查詢需要用到的參數) make sudo make install 如果在 ./configure 這一步出現錯誤 錯誤一: configure: error: You must have the GTK+ 2.0 development headers installed to compile Pidgin. If you only want to build Finch then specify –disable-gtkui when running configure. 解決: sudo apt-get install libgtk2.0-dev 錯誤二: configure: error: You must have libxml2 >= 2.6.0 development headers installed to build. 解決: sudo apt-get install libxml2-dev 錯誤三: configure: error: The msgfmt command is required to build libpurple. If it is installed on your system, ensure that it is in your path. If it is not, install gnu gettext to continue. 解決: sudo apt-get install gettext 如果在使用 GTalk 或 MSN 時出現錯誤 錯誤: SSL Library/Libraries……… : None (MSN and Google Talk will not work without SSL!) 解決: sudo apt-get install libnss-dev libnspr-dev Ubuntu編譯時找不到Makefile的解決辦法ZDNet 軟體頻道 更新時間:2007-09-26作者: korn 來源:賽迪網  本文關鍵詞: Ubuntu Proftp 如果是需要編譯的環境,推薦安裝"build essential"包, #sudo apt-get install "build-essential" 在用./configure ,make , makeinstall ,方法安裝軟體是,經常會發生發生各種錯誤,而導緻無法生成 makefile 檔案。現在我把我安裝過程中遇到的問題以及解決辦法寫下來,希望對大家有點幫助。 以我安裝 pidgin-2.0.0為例 #./configure 出現錯誤 : configure: error: C compiler cannot create executables 按照錯誤提示安裝缺少的包 #sudo apt-get install libc6-dev 再次 #./configure 出現錯誤 checking for GLIB... no no configure: error: You must have the GLib 2.0 development headers installed to build. 根據錯誤提示,用新得立搜尋 GLib 2.0 或者 用指令 #sudo apt-cache search GLib 2.0 發現有個包 libglib2.0-dev - Development files for the GLib library 。 選擇安裝; #sudo apt-get install libglib2.0-dev 這裡原文為libglib2.0-0-dev,似乎有誤。 #./configure #又出現錯誤 checking for X... no checking for GTK... no no configure: error: You must have the GTK+ 2.0 development headers installed to compile Pidgin. If you only want to build Finch then specify --disable-gtkui when running configure. 用如上同樣的方法查找到缺少的包 并安裝 sudo apt-get install libgtkmm2.0-dev ./configure 出現錯誤 checking for LIBXML... no no configure: error: You must have libxml2 >= 2.6.0 development headers installed to build. 于是安裝 sudo apt-get install libxml2-dev 經過上面包的安裝,在次./configure 沒有再出現錯誤,這次成功的生成了makefile 檔案。 然後執行: #make #make install 成功安裝軟體。 如果在./configure中還出現問題,那麼要找到問題所在,安裝缺失的包即可。 在配置過程中,config.log檔案是很有幫助的。我們可以在這裡面找出錯誤的根源,進而尋找應對措施。

繼續閱讀