openwrt 腳本檔案實作中繼（uci指令）

#!/bin/ash

#開啟WIFI功能，OpenWrt預設沒啟用WIFI

uci set wireless.@wifi-device[0].disabled=0
uci commit wireless
wifi

#建立wwan接口

uci set network.wwan=interface
uci set network.wwan.proto=dhcp
uci commit network

#連接配接上級路由，我的上級路由是WR720N，OpenWrt系統

#uci set wireless.radio0.channel=11  #與上級路由使用同樣的通道。可以不管
uci set wireless.@wifi-iface[0].network=wwan
uci set wireless.@wifi-iface[0].mode=sta
# 上級路由SSID
uci set wireless.@wifi-iface[0].ssid=goldsunny1    
# 上級路由加密方式
uci set wireless.@wifi-iface[0].encryption=psk2
# 上級路由密碼 
uci set wireless.@wifi-iface[0].key=goldsunny2014
uci commit wireless
wifi down
wifi

#ifconfig檢視wlan0是否連接配接成功，成功後還不能上網需要設定一下網關與DNS

#uci set network.lan.ipaddr=192.168.2.1      
# 修改本路由的IP，避免與上級路由沖突
#uci set network.lan.gateway=192.168.1.1     
# 上級路由網關
#uci set network.lan.dns=8.8.8.8             
# 不要使用上級路由IP
#uci commit network
#wifi down
#wifi


#建立無線中繼，通過無線接入MR10U上網

#添加 接口
#uci add /etc/config/wireless wifi-iface  
#uci set wireless.@wifi-iface[1].device=radio0

uci set wireless.@wifi-iface[1].device=radio0  >/dev/null
if [ $? -eq 0 ];then
    echo uci set wireless.@wifi-iface[1].device=radio0 is okey!
else
    uci add /etc/config/wireless wifi-iface  
    uci set wireless.@wifi-iface[1].device=radio0
fi

uci set wireless.@wifi-iface[1].network=lan
uci set wireless.@wifi-iface[1].mode=ap
uci set wireless.@wifi-iface[1].ssid=Openwrt-Faker
uci set wireless.@wifi-iface[1].encryption=psk2
uci set wireless.@wifi-iface[1].key=12345678
uci commit wireless
/etc/init.d/dnsmasq restart
/etc/init.d/firewall restart
wifi down
wifi


#建立stabridge接口

uci set network.stabridge=interface
uci set network.stabridge.network="lan wwan"
uci commit network

#調整防火牆

uci set firewall.@zone[0].forward=ACCEPT
uci set firewall.@zone[0].network="lan wwan"
uci set firewall.@zone[0].input=ACCEPT
uci set firewall.@zone[0].output=ACCEPT
uci set firewall.@zone[0].masq=1
uci set firewall.@zone[0].mtu_fix=1
uci commit firewall

#重新開機網絡：

/etc/init.d/network  restart