最近在用Django3寫運維管理平台，部分完成後上線使用，怕有性能問題，是以采用supervisord來管理啟動
1 [unix_http_server]
2 file=/var/run/supervisor/supervisor.sock ; (the path to the socket file)
3 ;chmod=0700 ; sockef file mode (default 0700)
4 ;chown=nobody:nogroup ; socket file uid:gid owner
5 ;username=user ; (default is no username (open server))
6 ;password=123 ; (default is no password (open server))
7
8 [inet_http_server] ; inet (TCP) server disabled by default
9 port=127.0.0.1:9001 ; (ip_address:port specifier, *:port for all iface)
10 username=imcyunw ; (default is no username (open server))
11 password=匿了 ; (default is no password (open server))
12
13 [supervisord]
14 logfile=/var/log/supervisor/supervisord.log ; (main log file;default $CWD/supervisord.log)
15 logfile_maxbytes=50MB ; (max main logfile bytes b4 rotation;default 50MB)
16 logfile_backups=10 ; (num of main logfile rotation backups;default 10)
17 loglevel=info ; (log level;default info; others: debug,warn,trace)
18 pidfile=/var/run/supervisord.pid ; (supervisord pidfile;default supervisord.pid)
19 nodaemon=false ; (start in foreground if true;default false)
20 minfds=1024 ; (min. avail startup file descriptors;default 1024)
21 minprocs=200 ; (min. avail process descriptors;default 200)
22 ;umask=022 ; (process file creation umask;default 022)
23 ;user=chrism ; (default is current user, required if root)
24 ;identifier=supervisor ; (supervisord identifier, default is 'supervisor')
25 ;directory=/tmp ; (default is not to cd during start)
26 ;nocleanup=true ; (don't clean up tempfiles at start;default false)
27 ;childlogdir=/tmp ; ('AUTO' child log dir, default $TEMP)
28 ;environment=KEY=value ; (key value pairs to add to environment)
29 ;strip_ansi=false ; (strip ansi escape codes in logs; def. false)
30
31 ; the below section must remain in the config file for RPC
32 ; (supervisorctl/web interface) to work, additional interfaces may be
33 ; added by defining them in separate rpcinterface: sections
34 [rpcinterface:supervisor]
35 supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface
36
37 [supervisorctl]
38 serverurl=unix:///var/run/supervisor/supervisor.sock ; use a unix:// URL for a unix socket
39 serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket
40 username=imcyunw ; should be same as http_username if set
41 password=imcdev2019# ; should be same as http_password if set
42 ;prompt=mysupervisor ; cmd line prompt (default "supervisor")
43 ;history_file=~/.sc_history ; use readline history if available
44
45 ; The below sample program section shows all possible program subsection values,
46 ; create one or more 'real' program: sections to be able to control them under
47 ; supervisor.
48
49 ;[program:theprogramname]
50 ;command=/bin/cat ; the program (relative uses PATH, can take args)
51 ;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
52 ;numprocs=1 ; number of processes copies to start (def 1)
53 ;directory=/tmp ; directory to cwd to before exec (def no cwd)
54 ;umask=022 ; umask for process (default None)
55 ;priority=999 ; the relative start priority (default 999)
56 ;autostart=true ; start at supervisord start (default: true)
57 ;autorestart=true ; retstart at unexpected quit (default: true)
58 ;startsecs=10 ; number of secs prog must stay running (def. 1)
59 ;startretries=3 ; max # of serial start failures (default 3)
60 ;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2)
61 ;stopsignal=QUIT ; signal used to kill process (default TERM)
62 ;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
63 ;user=chrism ; setuid to this UNIX account to run the program
64 ;redirect_stderr=true ; redirect proc stderr to stdout (default false)
65 ;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO
66 ;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
67 ;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10)
68 ;stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)
69 ;stdout_events_enabled=false ; emit events on stdout writes (default false)
70 ;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO
71 ;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
72 ;stderr_logfile_backups=10 ; # of stderr logfile backups (default 10)
73 ;stderr_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)
74 ;stderr_events_enabled=false ; emit events on stderr writes (default false)
75 ;environment=A=1,B=2 ; process environment additions (def no adds)
76 ;serverurl=AUTO ; override serverurl computation (childutils)
77
78 ; The below sample eventlistener section shows all possible
79 ; eventlistener subsection values, create one or more 'real'
80 ; eventlistener: sections to be able to handle event notifications
81 ; sent by supervisor.
82
83 ;[eventlistener:theeventlistenername]
84 ;command=/bin/eventlistener ; the program (relative uses PATH, can take args)
85 ;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
86 ;numprocs=1 ; number of processes copies to start (def 1)
87 ;events=EVENT ; event notif. types to subscribe to (req'd)
88 ;buffer_size=10 ; event buffer queue size (default 10)
89 ;directory=/tmp ; directory to cwd to before exec (def no cwd)
90 ;umask=022 ; umask for process (default None)
91 ;priority=-1 ; the relative start priority (default -1)
92 ;autostart=true ; start at supervisord start (default: true)
93 ;autorestart=unexpected ; restart at unexpected quit (default: unexpected)
94 ;startsecs=10 ; number of secs prog must stay running (def. 1)
95 ;startretries=3 ; max # of serial start failures (default 3)
96 ;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2)
97 ;stopsignal=QUIT ; signal used to kill process (default TERM)
98 ;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
99 ;user=chrism ; setuid to this UNIX account to run the program
100 ;redirect_stderr=true ; redirect proc stderr to stdout (default false)
101 ;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO
102 ;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
103 ;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10)
104 ;stdout_events_enabled=false ; emit events on stdout writes (default false)
105 ;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO
106 ;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
107 ;stderr_logfile_backups ; # of stderr logfile backups (default 10)
108 ;stderr_events_enabled=false ; emit events on stderr writes (default false)
109 ;environment=A=1,B=2 ; process environment additions
110 ;serverurl=AUTO ; override serverurl computation (childutils)
111
112 ; The below sample group section shows all possible group values,
113 ; create one or more 'real' group: sections to create "heterogeneous"
114 ; process groups.
115
116 ;[group:thegroupname]
117 ;programs=progname1,progname2 ; each refers to 'x' in [program:x] definitions
118 ;priority=999 ; the relative start priority (default 999)
119
120 ; The [include] section can just contain the "files" setting. This
121 ; setting can list multiple files (separated by whitespace or
122 ; newlines). It can also contain wildcards. The filenames are
123 ; interpreted as relative to this file. Included files *cannot*
124 ; include files themselves. # TCP socket used by Nginx backend upstream
socket=tcp://localhost:8000
# Directory where your site's project files are located
directory=/usr/local/ywcontrol
# Each process needs to have a separate socket file, so we use process_num
# Make sure to update "mysite.asgi" to match your project name
command=daphne -u /run/daphne/daphne%(process_num)d.sock --fd 0 --access-log - --proxy-headers ywcontrol.asgi:application
# Number of processes to startup, roughly the number of CPUs you have
numprocs=4
# Give each process a unique name so they can be told apart
process_name=asgi%(process_num)d
# Automatically start and recover processes
autostart=true
autorestart=true
# Choose where you want your log to go
stdout_logfile=/var/log/asgi.log
redirect_stderr=true ![TestLink導出用例轉換工具(XML2Excel)[圖]](data:image/gif;base64,R0lGODlhAQABAIAAAP///wAAACwAAAAAAQABAAACAkQBADs=)