RHEL6.6-x86-64
軟體源：
epel源
本地yum源
RHCS安裝及配置
192.168.1.5 安裝luci 兩塊硬碟, 其中/sdb提供共享存儲。
叢集節點
192.168.1.6 安裝ricci node1.mingxiao.info node1
192.168.1.7 安裝ricci node2.mingxiao.info node2
192.168.1.8 安裝ricci node3.mingxiao.info node3
前提：
1> 192.168.1.5分别與node1,node2,node3互信
2> 時間同步
3> 節點主機名分别為node1.mingxiao.info、node2.mingxiao.info、node3.mingxiao.info
進主機192.168.1.5
vim /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.1.6 node1.mingxiao.info node1
192.168.1.7 node2.mingxiao.info node2
192.168.1.8 node3.mingxiao.info node3 # for I in {1..3}; do scp /etc/hosts node$I:/etc;done
時間同步
# for I in {1..3}; do ssh node$I 'ntpdate time.windows.com';done
節點間互信。
.....
# yum -y install luci
# for I in {1..3}; do ssh node$I 'yum -y install ricci'; done
# for I in {1..3}; do ssh node$I 'echo xiaoming | passwd --stdin ricci'; done
# for I in {1..3}; do ssh node$I 'service ricci start;chkconfig ricci on'; done
# for I in {1..3}; do ssh node$I 'yum -y install httpd'; done
# service luci start
浏覽器輸入https://192.168.1.5:8084通路web管理界面，輸入root使用者和root密碼
建立叢集，Password輸入各節點ricci使用者密碼，
添加資源，這裡添加兩個一個為VIP，一個為httpd，添好如下圖界面
添加故障轉移域，如下圖：
由于沒有fences裝置，是以不再添加。
接下來要配置iscsi，提供共享存儲:
進192.168.1.5
# yum -y install scsi-target-utils
# for I in {1..3}; do ssh node$I 'yum -y install iscsi-initiator-utils'; done
vim /etc/tgt/targets.conf 添加如下内容
<target iqn.2015-05.ingo.mingxiao:ipsan.sdb>
<backing-store /dev/sdb>
vendor_id Xiaoming
lun 1
</backing-store>
initiator-address 192.168.1.0/24
incominguser iscsiuser xiaoming
</target> # service tgtd start
# tgtadm --lld iscsi --mode target --op show #可檢視到如下資訊
Target 1: iqn.2015-05.ingo.mingxiao:ipsan.sdb
System information:
Driver: iscsi
State: ready
LUN information:
LUN: 0
Type: controller
SCSI ID: IET 00010000
SCSI SN: beaf10
Size: 0 MB, Block size: 1
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
Backing store type: null
Backing store path: None
Backing store flags:
LUN: 1
Type: disk
SCSI ID: IET 00010001
SCSI SN: beaf11
Size: 21475 MB, Block size: 512
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
Backing store type: rdwr
Backing store path: /dev/sdb
Backing store flags:
Account information:
iscsiuser
ACL information:
192.168.1.0/24 # for I in {1..3}; do ssh node$I 'echo "InitiatorName=`iscsi-iname -p iqn.2015-05.info.mingxiao`" > /etc/iscsi/initiatorname.iscsi'; done vim /etc/iscsi/iscsid.conf #在node1、node2、node3啟用下面三行
node.session.auth.authmethod = CHAP
node.session.auth.username = iscsiuser
node.session.auth.password = xiaoming # ha ssh node$I 'iscsiadm -m discovery -t st -p 192.168.1.5';done
[ OK ] iscsid: [ OK ]
192.168.1.5:3260,1 iqn.2015-05.ingo.mingxiao:ipsan.sdb
[ OK ] iscsid: [ OK ]
192.168.1.5:3260,1 iqn.2015-05.ingo.mingxiao:ipsan.sdb
[ OK ] iscsid: [ OK ]
192.168.1.5:3260,1 iqn.2015-05.ingo.mingxiao:ipsan.sdb # ha ssh node$I 'iscsiadm -m node -T iqn.2015-05.ingo.mingxiao:ipsan.sdb -p 192.168.1.5 -l ';done
Logging in to [iface: default, target: iqn.2015-05.ingo.mingxiao:ipsan.sdb, portal: 192.168.1.5,3260] (multiple)
Login to [iface: default, target: iqn.2015-05.ingo.mingxiao:ipsan.sdb, portal: 192.168.1.5,3260] successful.
Logging in to [iface: default, target: iqn.2015-05.ingo.mingxiao:ipsan.sdb, portal: 192.168.1.5,3260] (multiple)
Login to [iface: default, target: iqn.2015-05.ingo.mingxiao:ipsan.sdb, portal: 192.168.1.5,3260] successful.
Logging in to [iface: default, target: iqn.2015-05.ingo.mingxiao:ipsan.sdb, portal: 192.168.1.5,3260] (multiple)
Login to [iface: default, target: iqn.2015-05.ingo.mingxiao:ipsan.sdb, portal: 192.168.1.5,3260] successful. node1，node2,node3分别安裝以下兩個rpm包，rpmfind.net可找到
# rpm -ivh lvm2-cluster-2.02.111-2.el6.x86_64.rpm gfs2-utils-3.0.12.1-68.el6.x86_64.rpm
warning: lvm2-cluster-2.02.111-2.el6.x86_64.rpm: Header V3 RSA/SHA1 Signature, key ID c105b9de: NOKEY
Preparing... ########################################### [100%]
1:gfs2-utils ########################################### [ 50%]
2:lvm2-cluster ########################################### [100%] 進node1
# pvcreate /dev/sdb
# vgcreate clustervg /dev/sdb
# lvcreate -L 5G -n clusterlv clustervg
# mkfs.gfs2 -j 2 -p lock_dlm -t mycluster:sdb /dev/clustervg/clusterlv
添加一個服務，名為webservice
将先前VIP資源加入
建立一個GFS2資源，并加入
将先前httpd資源加入
# clustat
Cluster Status for mycluster @ Thu May 7 00:07:21 2015
Member Status: Quorate
Member Name ID Status
------ ---- ---- ------
node1.mingxiao.info 1 Online, Local, rgmanager
node2.mingxiao.info 2 Online, rgmanager
node3.mingxiao.info 3 Online, rgmanager
Service Name Owner (Last) State
------- ---- ----- ------ -----
service:webservice node1.mingxiao.info started