netware 6.5的故障解決

hp ml350 g6上安裝netware 6.5，使用一段時間後，速度變得非常慢，拷貝檔案時常斷，後更新了所有的硬體固件，問題解決。

hp ml370 g6上安裝esxi 5.0，esxi 5.0上安裝netware 6.5後，拷貝檔案速度很慢，速度大約為實體機器安裝netware的50%。安裝vmtools後，速度基本達到了實體機器安裝netware的水準，great！！！

感謝google，下面是google到的一些文章：

For NetWare in a VM, make sure you set a memory reservation (VM Settings

-> Resources -> Memory) equal to the amount of memory assigned to the VM

- It can make a BIG difference.

You will also want to make sure you have the VMTools aplied. I have seen things work slow without the tools installed. Install them.

Netware 6.5: VMware Tools Install

To install the VMware tools on a Netware 6.5 Virtual Machine follow these easy steps: 

1. Power on the virtual machine.

2. Choose VM > Install VMware Tools.

3. Inside the guest OS,Load the CD-ROM driver if it's not already loaded: In the system console for a NetWare 6.5 virtual machine, type LOAD CDDVD

4. Run setup.ncf from the VMWTOOLS volume. Type: vmwtools:\setup.ncf

5. Restart the guest operating system. In the system console, type reboot server

If the VMware Tools install ISO is still mounted, click: VM > End VMware Tools Install

本文轉自 h2appy  51CTO部落格，原文連結：http://blog.51cto.com/h2appy/714882，如需轉載請自行聯系原作者