CISCO 配置實驗--靜态路由

<b>靜态路由實驗</b>

拓撲圖：

基本配置

ROUTER1：

Router&gt;enable

Router#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname r1

r1(config)#enable secret ccna

r1(config)#interface fastEthernet 0/0

r1(config-if)#ip add 10.1.1.1 255.0.0.0

r1(config-if)#no shutdown

r1(config-if)#line vty 0 4

r1(config-line)#login

r1(config-line)#password ccna

r1(config-line)#exit

r1(config)#interface serial 0/0

r1(config-if)#ip add 192.168.10.1 255.255.255.0

ROUTER2：

Router(config)#hostname r2

r2(config)#enable secret ccnp

r2(config)#interface fastEthernet 0/0

r2(config-if)#ip address 172.168.1.1 255.255.0.0

r2(config-if)#no shutdown

r2(config-if)#line vty 0 4

r2(config-line)#login

r2(config-line)#password ccnp

r2(config-line)#exit

r2(config)#interface serial 0/0

r2(config-if)#ip address 192.168.10.2 255.255.255.0

r2(config-if)#exit

r2(config)#interface serial 0/1

r2(config-if)#ip address 192.168.20.1 255.255.255.0

r2(config-if)#clock rate 56000

ROUTER3：

Router(config)#hostname r3

r3(config)#enable secret ccie

r3(config)#interface fastEthernet 0/0

r3(config-if)#ip address 192.168.1.1 255.255.255.0

r3(config-if)#no shutdown

r3(config-if)#line vty 0 4

r3(config-line)#login

r3(config-line)#password ccie

r3(config-line)#exit

r3(config)#interface serial 0/0

r3(config-if)#ip address 192.168.20.2 255.255.255.0

r3(config-if)#exit

配置靜态路由：<b></b>

r1(config)#ip route 172.168.0.0 255.255.0.0 192.168.10.2

r1(config)#ip route 192.168.1.0 255.255.255.0 192.168.10.2

r1(config)#ip route 192.168.20.0 255.255.255.0 192.168.10.2

r2(config)# ip route 10.0.0.0 255.0.0.0 192.168.10.1

r2(config)# ip route 192.168.1.0 255.255.255.0 192.168.20.2

r3(config)#ip route 172.168.0.0 255.255.0.0 192.168.20.1

r3(config)#ip route 192.168.10.0 255.255.255.0 192.168.20.1

驗證靜态路由

r1#show ip route

C    10.0.0.0/8 is directly connected, FastEthernet0/0

S    172.168.0.0/16 [1/0] via 192.168.10.2

S    192.168.1.0/24 [1/0] via 192.168.10.2

C    192.168.10.0/24 is directly connected, Serial0/0

S    192.168.20.0/24 [1/0] via 192.168.10.2

r2#show ip route

S    10.0.0.0/8 [1/0] via 192.168.10.1

C    172.16.0.0/16 is directly connected, FastEthernet0/0

S    192.168.1.0/24 [1/0] via 192.168.20.2

C    192.168.20.0/24 is directly connected, Serial0/1

r3#show ip route

S    10.0.0.0/8 [1/0] via 192.168.20.1

S    172.168.0.0/16 [1/0] via 192.168.20.1

C    192.168.1.0/24 is directly connected, FastEthernet0/0

S    192.168.10.0/24 [1/0] via 192.168.20.1

C    192.168.20.0/24 is directly connected, Serial0/0