CentOS多網卡重命名配置
在CentOS7中我安裝了3塊網卡，但是名字是enoxxxxx的格式，讓我這個有強迫症的***座很是不爽，以下是我配置網卡并且重命名為ethx的詳細步驟
前提工作要做好：
1.檢視網卡UUID
# nmcli con show
名稱 UUID 類型 裝置
eth1 dfc9199c-7b47-4209-a396-109bf44e683a 802-3-ethernet eth1
eth2 020d86aa-548f-49c2-9cb0-f6cfffdb8219 802-3-ethernet eth2
eth0 a5e6ae5c-dd71-48be-b374-ad64121bd785 802-3-ethernet eth0
2.檢視網卡資訊
# nmcli device show [裝置名] 例：
# nmcli device show eth0
GENERAL.裝置: eth0
GENERAL.類型: ethernet
GENERAL.硬碟: 00:0C:29:94:C8:08
GENERAL.MTU: 1500
GENERAL.狀态: 100 (連接配接的)
GENERAL.CONNECTION: eth0
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/0
WIRED-PROPERTIES.容器: 開
IP4.位址[1]: 192.168.66.4/24
IP4.網關: 192.168.66.1
IP4.DNS[1]: 202.106.46.151
IP6.位址[1]: fe80::20c:29ff:fe94:c808/64
IP6.網關:
步入正題
進入到網卡配置檔案目錄
# cd /etc/sysconfig/network-scripts
将網卡重新命名
# mv ifcfg-eno16777736 ifcfg-eth0
修改網卡資訊，不是很懂的小夥伴請參考我的另一篇詳細解說http://baoer7758.blog.51cto.com/8187563/1638229
# vim ifcfg-eth0
HWADDR=00:0c:29:94:c8:08
TYPE=Ethernet
BOOTPROTO=static
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=yes
NAME=eth0
UUID=a5e6ae5c-dd71-48be-b374-ad64121bd785
# DEVICE=eno16777736
ONBOOT=yes
IPADDR=192.168.66.4
NETMASK=255.255.255.0
GATEWAY=192.168.66.1
DNS1=202.106.46.151
# DEVICE=eth0
将配置檔案拷貝出來兩份作為另外兩個網卡的配置檔案
# cp ifcfg-eth0 ifcfg-eth1
# cp ifcfg-eth0 ifcfg-eth2
編輯修改：
# vim ifcfg-eth1
HWADDR=00:0c:29:94:c8:12
NAME=eth1
UUID=dfc9199c-7b47-4209-a396-109bf44e683a
IPADDR=192.168.67.4
編輯修改
# vim ifcfg-eth2
HWADDR=00:0c:29:94:c8:1c
NAME=eth2
UUID=020d86aa-548f-49c2-9cb0-f6cfffdb8219
IPADDR=192.168.68.4
開始為重命名做配置， 不是很懂的小夥伴請參考我的另一篇詳細解說http://baoer7758.blog.51cto.com/8187563/1638229
# vi /etc/sysconfig/grub
GRUB_TIMEOUT=5
GRUB_DEFAULT=saved
GRUB_DISABLE_SUBMENU=true
GRUB_TERMINAL_OUTPUT="console"
GRUB_CMDLINE_LINUX="rd.lvm.lv=centos/root rd.lvm.lv=centos/swap crashkernel=auto net.ifnames=0 biosdevname=0 net.ifnames=1 biosdevname=1 net.ifnames=2 biosdevname=2 rhgb quiet" //加粗為添加内容
GRUB_DISABLE_RECOVERY="true"
重新加載到啟動中
# grub2-mkconfig -o /boot/grub2/grub.cfg
Generating grub configuration file ...
Found linux p_w_picpath: /boot/vmlinuz-3.10.0-229.el7.x86_64
Found initrd p_w_picpath: /boot/initramfs-3.10.0-229.el7.x86_64.img
Found linux p_w_picpath: /boot/vmlinuz-0-rescue-9bede79b46bd4e9696b92a4ec68a97b1
Found initrd p_w_picpath: /boot/initramfs-0-rescue-9bede79b46bd4e9696b92a4ec68a97b1.img
done
重新啟動系統reboot
檢視網卡資訊
# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.66.4 netmask 255.255.255.0 broadcast 192.168.66.255
inet6 fe80::20c:29ff:fe94:c808 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:94:c8:08 txqueuelen 1000 (Ethernet)
RX packets 690 bytes 69262 (67.6 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 488 bytes 65725 (64.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.67.4 netmask 255.255.255.0 broadcast 192.168.67.255
inet6 fe80::20c:29ff:fe94:c812 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:94:c8:12 txqueuelen 1000 (Ethernet)
RX packets 129 bytes 15944 (15.5 KiB)
TX packets 26 bytes 3927 (3.8 KiB)
eth2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.68.4 netmask 255.255.255.0 broadcast 192.168.68.255
inet6 fe80::20c:29ff:fe94:c81c prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:94:c8:1c txqueuelen 1000 (Ethernet)
RX packets 127 bytes 15613 (15.2 KiB)
TX packets 25 bytes 3609 (3.5 KiB)
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 4 bytes 420 (420.0 B)
TX packets 4 bytes 420 (420.0 B)
發現哦了
![如何了解JavaScript子產品化？[圖]](data:image/gif;base64,R0lGODlhAQABAIAAAP///wAAACwAAAAAAQABAAACAkQBADs=)