H3C 胖AP設定（VLAN模式）——進階配置

恢複出廠

<WA2620i-AGN>reset save

The saved configuration file will be erased. Are you sure? [Y/N]:y

Configuration file in flash is being cleared.

Please wait ...

....

 Configuration file is cleared.

<WA2620i-AGN>reboot

 Start to check configuration with next startup configuration file, please wait.

........DONE!

 This command will reboot the device. Current configuration will be lost, save c

urrent configuration? [Y/N]:n

 This command will reboot the device. Continue? [Y/N]:y

#Nov 24 03:03:52:580 2014 WA2620i-AGN DEVM/1/REBOOT:

 Reboot device by command.

配置交換機名稱

<WA2620i-AGN>sys

System View: return to User View with Ctrl+Z.

[WA2620i-AGN]sysname IT-WA2620-3

配置管理位址

interface Vlan-interface1

ip address 172.16.1.10 255.255.255.0

配置管理者賬号及密碼，為該使用者開啟telnet、con、web服務

[IT-WA2620-3]local-user admin

[IT-WA2620-3-luser-admin]password cipher 12345678

[IT-WA2620-3-luser-admin]service-type telnet terminal

[IT-WA2620-3-luser-admin]service-type web

配置con接口與telnet

[IT-WA2620-3]user-interface con 0

[IT-WA2620-3-ui-console0]authentication-mode scheme

[IT-WA2620-3-ui-console0]quit

[IT-WA2620-3]user-interface vty 0 4

[IT-WA2620-3-ui-vty0-4]authentication-mode scheme

[IT-WA2620-3-ui-vty0-4]quit

配置SSH(最好逐行複制輸入，中間有對話框，不要全部複制粘貼)

ssh server enable

public-key local create rsa

1024

user-interface vty 0 4

authentication-mode scheme

protocol inbound ssh

quit

local-user admin

service-type ssh

authorization-attribute level 3

ssh user admin service-type stelnet authentication-type password

配置使用者之間不隔離

undo wlan-client-isolation enable

添加預設路由

ip route-static 0.0.0.0 0.0.0.0 172.16.1.1

配置SNMP

snmp-agent

snmp-agent community read public

snmp-agent sys-info version all

配置NTP

ntp-service unicast-server 210.72.145.44

ntp-service unicast-server 202.120.2.101

配置上行鍊路為Trunk

interface g1/0/1

port link-type trunk

port trunk permit vlan all

配置需要通過VLAN

vlan 10

Description Server-Lan

vlan 20

Description Desktop-Lan

vlan 30

Description Laptop-Lan

vlan 40

Description Guest-Lan

。

配置多VLAN無線接口

interface WLAN-BSS 11

port link-type access

port access vlan 30

interface WLAN-BSS 12

interface WLAN-BSS 13

port access vlan 40

interface WLAN-BSS 14

配置模闆與SSID參數（通常所謂的AES加密）

wlan service-template 11 crypto

 ssid YYE5G-H3C

 cipher-suite tkip

 security-ie rsn

wlan service-template 12 crypto

 ssid YYE-H3C

wlan service-template 13 crypto

 ssid Guest5G-H3C

wlan service-template 14 crypto

 ssid Guest-H3C

 port-security port-mode psk 

 port-security tx-key-type 11key 

 port-security preshared-key pass-phrase simple 12345678

配置開放SSID（舉例）

wlan service-template 1 clear

ssid H3C

配置射頻綁定SSID、模闆、信道

[IT-WA2620-3]interface WLAN-Radio1/0/1

[IT-WA2620-3-WLAN-Radio1/0/1]service-template 11 interface wlan-bss 11

[IT-WA2620-3-WLAN-Radio1/0/1]service-template 13 interface wlan-bss 13

[IT-WA2620-3-WLAN-Radio1/0/1]interface WLAN-Radio1/0/2

[IT-WA2620-3-WLAN-Radio1/0/1]service-template 12 interface wlan-bss 12

[IT-WA2620-3-WLAN-Radio1/0/1]service-template 14 interface wlan-bss 14

[IT-WA2620-3-WLAN-Radio1/0/1]channel 6

清理預設模闆H3C

[IT-WA2620-3]interface WLAN-Radio1/0/2

[IT-WA2620-3-WLAN-Radio1/0/2]undo service-template 1

[IT-WA2620-3-WLAN-Radio1/0/2]quit

[IT-WA2620-3]undo wlan service-template 1

[IT-WA2620-3]undo interface WLAN-BSS32

[IT-WA2620-3]undo interface WLAN-BSS33

啟用模闆（放出SSID信号）

service-template enable

本文轉自yangye1985 51CTO部落格，原文連結：http://blog.51cto.com/yangye/1670012，如需轉載請自行聯系原作者