freebsd配置IP

用ifconfig -a來檢視正确的網卡名

# 手工指定的方式

################################

# ipconfig fxp0 192.168.8.33/24     # 添加網卡ip

# route add default 192.168.8.1     # 添加路由（也可了解為網關）

立即生效，但是重新開機後失效。

#重新啟動後仍然生效

# ee /etc/rc.conf

ifconfig_fxp0="inet 192.168.8.8 netmask 255.255.255.0 "   # fxp0 網卡位址和子網路遮罩

defaultrouter="192.168.8.10"      # 網關位址

hostname="study.nowire.com.cn"      # 機器名

ifconfig_wi0="inet 192.168.8.55 netmask 255.255.255.0"   # wi0 網卡位址，對應無線網卡

修改 /etc/rc.conf 配置之後可以通過如下方式生效：

第一種方法：# sh /etc/rc

第二種方法：# /etc/netstart

第三種方法：重新開機機器

# DHCP 方式

在 /etc/rc.conf 中添加：

ifconfig_fxp0="DHCP"

需要根據具體情況指定網卡名稱。

#####

關于 DNS 位址的配置

# ee /etc/resolv.conf

nameserver 202.96.209.133

nameserver 202.96.209.5

控制網卡的開關

ifconfig fxp0 up

ifconfig fxp0 down

# 路由方面的配置

檢視路由

netstat -rn

添加路由(相當于配置gateway)

route add default 192.168.8.1      # 192.168.8.1為網關位址

如果要修改目前路由配置，需要先删除，再新增一條，當然如果不是同名的，如不是default的可以直接添加

route delete default 192.168.8.1

route add default 192.168.8.10

以下的例子并不常用

# DHCP release

# dhclient -r    Release the current lease and exit the client.

Here's a clip of dhclient from the FreeBSD man pages;

"The client normally doesn't release the current lease as it is not required by the DHCP protocol. Some cable ISPs require their clients to notify the server if they wish to release an assigned IP address. The -r flag explicitly releases the current lease, and once the lease has been released, the client exits."

If you are getting kill: xxxx: No such process This means the dhclient process was already stopped

# 指定 interface 通過 dhcp 擷取 IP

# dhclient xl0    Starts the dhclient process for interface xl0

I think its a good idea to specify an interface Otherwise you may notice your /var/log/messages filling up with "dhclient: send_packet: Address family not supported by protocol family"

"If no interface names are specified on the command line dhclient will normally identify all network interfaces, elimininating non-broadcast interfaces if possible, and attempt to configure each interface."

# 指定某個 interface 在通過 DHCP 擷取不成功的時候，限定一個固定 IP

方法：

在 /etc/dhclient.conf 中添加

alias {

interface "xl0";

fixed-address 192.168.42.40;

option subnet-mask 255.255.255.0;

}

舉例：

# ee /etc/dhclient.conf

# $FreeBSD: src/etc/dhclient.conf,v 1.2.2.1 2001/12/14 11:44:31 rwatson Exp $

#

#    This file is required by the ISC DHCP client.

#    See ``man 5 dhclient.conf'' for details.

#    In most cases an empty file is sufficient for most people as the

#    defaults are usually fine.

上例的作用是，當 dhclient 不能通過 DHCP server 擷取 IP 時，則使用 192.168.42.40 這個固定 IP。