SCCM 2012系列3 安裝SCCM 2012

“開始”-“管理工具”-“Internet 資訊服務(IIS)管理器”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_134371596446PE.jpg" target="_blank"></a>

選擇預設站點中的“WebDAV創作規則”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343715966r8kl.jpg" target="_blank"></a>

啟用WebDAV

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343715969WBE8.jpg" target="_blank"></a>

添加創作規則

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343715970QNoX.png" target="_blank"></a>

選擇“全部内容”，“所有使用者”，“讀取”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343715972UZ15.jpg" target="_blank"></a>

選擇“WebDAV設定”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343715977syWX.jpg" target="_blank"></a>

按照如上圖所示進行更改，然後點選“應用”

然後打開C:\Windows\System32\inetsrv\config路徑

以記事本的方式打開“applicationHost”檔案

找到&lt;requestFiltering&gt;

把&lt;add fileExtension=".mdb" allowed="false" /&gt;改成

&lt;add fileExtension=".mdb" allowed="true" /&gt;然後儲存關閉。

在域控伺服器上，打開“Active Directory 使用者和計算機”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343715979tYfw.jpg" target="_blank"></a>

“檢視”-“進階功能”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343715982NBxn.jpg" target="_blank"></a>

滑鼠右鍵“System”-“屬性”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343715985OvfL.jpg" target="_blank"></a>

在“安全”頁籤裡選擇“添加”，并把對象類型選擇為“計算機”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343715987H1IH.png" target="_blank"></a>

添加SCCM管理中心站點伺服器和主站點伺服器

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343715988oJuT.png" target="_blank"></a>

對此SCCM 管理中心站點計算機帳号和主站點計算機帳号賦予完全控制權限，再選擇“進階”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343715993GCoE.jpg" target="_blank"></a>

分别選擇SCCM 管理中心站點計算機帳号和主站點計算機帳号-“編輯”-應用于“這個對象及全部後代”，然後“應用”并确定。

回到SCCM 管理中心站點伺服器，放入SCCM 2012的安裝CD光牒，打開CD光牒所在盤符的X：\SMSSETUP\BIN\I386檔案夾，右鍵以管理者方式運作“EXTADSCH”檔案，一閃而過以後，在C槽的根目錄下可以看到自動生成的ExtADSch.txt文本，雙點打開可以看到如下資訊：

&lt;04-16-2012 22:23:13&gt; Modifying Active Directory Schema - with SMS extensions.

?&lt;04-16-2012 22:23:13&gt; DS Root:CN=Schema,CN=Configuration,DC=windows,DC=com

?&lt;04-16-2012 22:23:13&gt; Attribute cn=MS-SMS-Site-Code already exists.

?&lt;04-16-2012 22:23:13&gt; Attribute cn=mS-SMS-Assignment-Site-Code already exists.

?&lt;04-16-2012 22:23:13&gt; Attribute cn=MS-SMS-Site-Boundaries already exists.

?&lt;04-16-2012 22:23:13&gt; Attribute cn=MS-SMS-Roaming-Boundaries already exists.

?&lt;04-16-2012 22:23:13&gt; Attribute cn=MS-SMS-Default-MP already exists.

?&lt;04-16-2012 22:23:13&gt; Attribute cn=mS-SMS-Device-Management-Point already exists.

?&lt;04-16-2012 22:23:13&gt; Attribute cn=MS-SMS-MP-Name already exists.

?&lt;04-16-2012 22:23:13&gt; Attribute cn=MS-SMS-MP-Address already exists.

?&lt;04-16-2012 22:23:13&gt; Attribute cn=mS-SMS-Health-State already exists.

?&lt;04-16-2012 22:23:13&gt; Attribute cn=mS-SMS-Source-Forest already exists.

?&lt;04-16-2012 22:23:13&gt; Attribute cn=MS-SMS-Ranged-IP-Low already exists.

?&lt;04-16-2012 22:23:13&gt; Attribute cn=MS-SMS-Ranged-IP-High already exists.

?&lt;04-16-2012 22:23:13&gt; Attribute cn=mS-SMS-Version already exists.

?&lt;04-16-2012 22:23:13&gt; Attribute cn=mS-SMS-Capabilities already exists.

?&lt;04-16-2012 22:23:14&gt; Class cn=MS-SMS-Management-Point already exists.

?&lt;04-16-2012 22:23:14&gt; Located LDAP://cn=MS-SMS-Management-Point,CN=Schema,CN=Configuration,DC=windows,DC=com

?&lt;04-16-2012 22:23:15&gt; Successfully updated class LDAP://cn=MS-SMS-Management-Point,CN=Schema,CN=Configuration,DC=windows,DC=com.

?&lt;04-16-2012 22:23:15&gt; Class cn=MS-SMS-Server-Locator-Point already exists.

?&lt;04-16-2012 22:23:15&gt; Located LDAP://cn=MS-SMS-Server-Locator-Point,CN=Schema,CN=Configuration,DC=windows,DC=com

?&lt;04-16-2012 22:23:16&gt; Successfully updated class CN=Schema,CN=Configuration,DC=windows,DC=com.

?&lt;04-16-2012 22:23:16&gt; Class cn=MS-SMS-Site already exists.

?&lt;04-16-2012 22:23:16&gt; Located LDAP://cn=MS-SMS-Site,CN=Schema,CN=Configuration,DC=windows,DC=com

?&lt;04-16-2012 22:23:16&gt; Successfully updated class LDAP://cn=MS-SMS-Site,CN=Schema,CN=Configuration,DC=windows,DC=com.

?&lt;04-16-2012 22:23:16&gt; Class cn=MS-SMS-Roaming-Boundary-Range already exists.

?&lt;04-16-2012 22:23:16&gt; Located LDAP://cn=MS-SMS-Roaming-Boundary-Range,CN=Schema,CN=Configuration,DC=windows,DC=com

?&lt;04-16-2012 22:23:16&gt; Successfully updated class LDAP://cn=MS-SMS-Roaming-Boundary-Range,CN=Schema,CN=Configuration,DC=windows,DC=com.

?&lt;04-16-2012 22:23:16&gt; Successfully extended the Active Directory schema.

?&lt;04-16-2012 22:23:16&gt; Please refer to the ConfigMgr documentation for instructions on the manual

?&lt;04-16-2012 22:23:16&gt; configuration of access rights in active directory which may still

?&lt;04-16-2012 22:23:16&gt; need to be performed. (Although the AD schema has now be extended,

?&lt;04-16-2012 22:23:16&gt; AD must be configured to allow each ConfigMgr Site security rights to

?&lt;04-16-2012 22:23:16&gt; publish in each of their domains.)

表示我們的架構已經擴充成功了。

放入SCCM 2012CD光牒以後運作

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343715995PTiJ.jpg" target="_blank"></a>

選擇“評估伺服器準備情況”我們進行安裝前準備條件的評估

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343715997T8am.jpg" target="_blank"></a>

出現的警告是記憶體沒達到要求，這裡可以忽略算是安裝條件評估通過。

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343715999QvtK.jpg" target="_blank"></a>

點選“安裝”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_13437160011vNo.jpg" target="_blank"></a>

“下一步”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716002QUDh.jpg" target="_blank"></a>

選擇“安裝Configuration Manager 管理中心站點”，“下一步”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716004rC9H.jpg" target="_blank"></a>

輸入産品密鑰，下一步

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716005nxCI.jpg" target="_blank"></a>

接受許可條款，“下一步”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716008grxl.jpg" target="_blank"></a>

接受相關産品元件的許可條款，“下一步”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716009pDDS.jpg" target="_blank"></a>

選擇“下載下傳所需檔案”下載下傳安裝程式所需檔案，并設定下載下傳檔案的儲存路徑，“下一步”（如果提前下載下傳好了就選擇“使用以前下載下傳的檔案”并浏覽到下載下傳檔案的所在路徑）

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716011wisC.jpg" target="_blank"></a>

開始下載下傳或檢測安裝程式所需的檔案，等待完成。

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716012FTWH.jpg" target="_blank"></a>

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_13437160132WX5.jpg" target="_blank"></a>

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716014Bx4L.jpg" target="_blank"></a>

設定站點代碼和站點名稱，“下一步”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_134371601663co.jpg" target="_blank"></a>

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716017pDTQ.jpg" target="_blank"></a>

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716019rwSY.jpg" target="_blank"></a>

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716020MIrb.jpg" target="_blank"></a>

确認安裝資訊，“下一步”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716021glNx.jpg" target="_blank"></a>

檢查安裝條件是否滿足，這裡的警告可以忽略，“開始安裝”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716022FLNd.jpg" target="_blank"></a>

安裝開始，耐心等待安裝完成。

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716024GXKG.jpg" target="_blank"></a>

安裝完成，“關閉”

點開“伺服器管理器”-“角色”-“Windows 部署服務”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716025Aqen.jpg" target="_blank"></a>

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_13437160261E5C.jpg" target="_blank"></a>

預設勾選了“部署伺服器”和“傳輸伺服器”，“下一步”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716027xQPs.jpg" target="_blank"></a>

“安裝”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716028BQO2.jpg" target="_blank"></a>

安裝完成。

打開“開始”-“管理工具”-“Windows 部署服務”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716029QiGZ.jpg" target="_blank"></a>

滑鼠右鍵SCCM伺服器-“配置伺服器”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716031cDOL.jpg" target="_blank"></a>

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716032yLiv.jpg" target="_blank"></a>

把預設的C槽改成D盤，“下一步”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716033ULVC.jpg" target="_blank"></a>

選擇“相應所有用戶端計算機（已知和未知）”，“下一步”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716035Y0A2.jpg" target="_blank"></a>

不勾選“立即向伺服器中添加映像”，“完成”。

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716037VH4h.png" target="_blank"></a>

再選擇SCCM伺服器，滑鼠右鍵“屬性”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716038TAh3.png" target="_blank"></a>

在“PXE響應”頁籤裡，把PXE的響應延遲設定為5秒，“确定”。

1.1.4.2 安裝SCCM 2012主站點

放入SCCM 2012安裝CD光牒

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716039cKSI.jpg" target="_blank"></a>

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716041bl6u.jpg" target="_blank"></a>

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716042XL25.jpg" target="_blank"></a>

選擇“安裝Configuration Manager 主站點”，如果我們不做大的環境，而是獨立的環境或小企業那麼就可以勾選上“為獨立的主站點使用典型安裝選項”，下一步

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716044mgso.jpg" target="_blank"></a>

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716045suDm.jpg" target="_blank"></a>

接受許可條款，下一步

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716047i1oM.jpg" target="_blank"></a>

接受這3個産品的許可條款，下一步

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716048rZ2C.jpg" target="_blank"></a>

選擇“使用以前下載下傳的檔案”，指定我們預先下載下傳好所需元件安裝檔案的所在路徑，下一步

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716050UmY9.jpg" target="_blank"></a>

下一步

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716054seh8.jpg" target="_blank"></a>

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716055GmAS.jpg" target="_blank"></a>

設定站點代碼和站點名稱，注意：站點代碼不能和管理中心站點代碼一樣，下一步

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716056ntQU.jpg" target="_blank"></a>

輸入我們的管理中心站點的FQDN，下一步

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716057lM32.jpg" target="_blank"></a>

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_13437160598NtO.jpg" target="_blank"></a>

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716059eaNl.jpg" target="_blank"></a>

選擇“針對每個站點系統角色配置通信方法”，下一步

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716061KjwY.jpg" target="_blank"></a>

這裡都選擇HTTP連接配接方式，下一步

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716062IMLG.jpg" target="_blank"></a>

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716063ZF5l.jpg" target="_blank"></a>

确認安裝資訊，下一步

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716066JeN1.png" target="_blank"></a>

檢測是否滿足安裝環境要求，警告可以忽略不計，“開始安裝”

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716067Y5ff.jpg" target="_blank"></a>

<a href="http://rdsrv.blog.51cto.com/attachment/201207/31/2996778_1343716068jZeb.jpg" target="_blank"></a>

安裝完成，關閉。

更多精彩分享，期待您的關注！

本文轉自 ZJUNSEN 51CTO部落格，原文連結：http://blog.51cto.com/rdsrv/948970，如需轉載請自行聯系原作者