建立邏輯卷的過程

首先分區：

# fdisk /dev/sda

The number of cylinders for this disk is set to 60801.

There is nothing wrong with that, but this is larger than 1024,

and could in certain setups cause problems with:

1) software that runs at boot time (e.g., old versions of LILO)

2) booting and partitioning software from other OSs

   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help):p

Disk /dev/sda: 500.1 GB, 500107862016 bytes

255 heads, 63 sectors/track, 60801 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System

/dev/sda1   *           1       12748   102398278+  83  Linux

/dev/sda2           12749       13270     4192965   82  Linux swap / Solaris

Command (m for help): n

Command action

   e   extended

   p   primary partition (1-4)

p

Partition number (1-4): 3

First cylinder (13271-60801, default 13271): 

Using default value 13271

Last cylinder or +size or +sizeM or +sizeK (13271-60801, default 60801): 

Using default value 60801

Command (m for help): t

Hex code (type L to list codes): 8e

Changed system type of partition 3 to 8e (Linux LVM)

Command (m for help): w

The partition table has been altered!

Calling ioctl() to re-read partition table.

執行下面的指令不必重新開機機器：

# partprobe 這個指令必須記住，老是忘記

建立實體卷：

# pvcreate /dev/sda3

建立卷組：

# vgcreate xenvg /dev/sda3 

建立邏輯卷：

# lvcreate -L 10G -n test xenvg

本文轉自feisky部落格園部落格，原文連結：http://www.cnblogs.com/feisky/archive/2012/02/02/2336110.html，如需轉載請自行聯系原作者