As one of the high-quality sabers loved by American SEALs, the S37Knife2000 multifunctional saber is famous in Europe and the United States, the total length of the knife is 31.4 cm, the overall mass is 362.8 grams, the blade length is 17.8 cm, the manufacturing material is made of high-quality AUS6 stainless steel, and the hardness can reach about RC56-58 after heat treatment, which can easily pierce high-quality gasoline drums, and also has the ability to cut, smash, cut, pry, The function of the thorn, the overall performance is more than a star and a half stronger than the general similar products.
In fact, as early as the beginning of the equipment, this saber has undergone extremely strict various test experiments, including: the flexural strength of the knife tip, the toughness of the blade, the life of the blade, and the screwing limit of the handle, salt water immersion for up to two weeks, gasoline or acetylene burning experiments, and continuous cutting ability of a variety of ropes of different types and materials to ensure that the knife will not fall off the chain when it is really used
The knife edge design adopts a multi-functional way of combining straight blade and tooth edge, the tip of the knife is slightly raised to increase the function of picking up after piercing the target, in fact, it is the most classic Boyi blade shape, the back of the knife is thicker and designed with a curve for thumb pressing, the serrations are not far from the handle, the surface of the knife body is gray for epoxide coating, not only will not expose the target due to reflection, and also has a very good anti-rust and anti-corrosion function.
The handle of the S37Knife2000 multifunctional saber is made of thermoplastic elastic material Kraton, a lightweight special material that can be precisely shaped due to its unique molecular structure and is widely used in different fields. The innovative ergonomic shape of the handle has a reasonable center of gravity for a comfortable grip, and the diamond-shaped non-slip texture at the handle further increases the grip, making it extremely easy to stab and chop. The protruding part of the tail of the handle is the tail hammer of the knife, which can be easily used to break windows or smash coconuts. There is also a circular opening at the tail, mainly for piercing the rope or pendant.
This Navy SEAL saber is made of Kraton scabbard with SOG seal branding on the front, fixed with cross screws on the left and right sides, and four round holes on the blade, which can be fixed to the leg or the outside of the backpack with tactical ropes. At the hilt, snap leather straps are used to prevent accidental falling. The scabbard also has a Velcro belt hanging with quick adhesive opening, made of high-density nylon, held in place by two aluminum nails, and the quality is not as strong as usual.