When it was 618, many friends looked for me to install the machine, helpless is not in advance to consult me compatibility and collocation is reasonable and other issues, so encountered some more unreasonable situations, such as configuration mismatch, heat dissipation unreasonable, etc., this sharing of the Silver Shin CS351 installation is a friend in the configuration of the choice did not pay attention to the chassis support M-ATX and directly misselected the ITX motherboard ... However, he is more anxious to use, so he still helped him install this machine, and I will share it below
The whole machine desktop comes first.
Friends' idea is to install a computer that can both play games and hang up when downloading the machine and can easily change the hard disk, to put it simply, it can be played and installed, Sapphire (Sapphire) NITRO B550I ultra-platinum motherboard + sapphire RX6750XT ultra-platinum graphics card Combination cost performance is very good, and Yinxin's CS351 chassis is indeed very easy to install, but there is a problem with the collocation.
Configuration list
CPU： AMD 5800X
Motherboard: Sapphire NITRO B550I Ultra Platinum Motherboard
Memory: Corsair Avenger RGB PRO SL Black DDR4-3600 16GB (8G×2) Set
Hard disk: Shadow Star X4 1T
Graphics: Sapphire RX6750XT Ultra Platinum graphics card
Heat dissipation: Limin AXP120-X67 White ARGB down-voltage CPU radiator
Power supply: SILVERSTONE rated 750W SX750-G SFX power supply
Chassis: SilverStone CS351 Nas storage chassis
Monitor ASUS VG27AQL1A
Keyboard: Corsair K70 Pro
Mouse: CORSAIR SABRE RGB PRO mouse
Accessories unpack
mainboard
Friends chose sapphire's NITRO B550I Ultra Platinum motherboard.
Out of the box GIF first.
NITRO B550I ultra-platinum motherboard has 8 phase CPU power, 70A specifications, power supply design is good, you can see a thick looking full nickel-plated heat pipe connected to the power supply MOS and M.2 hard disk heat dissipation armor, further enhance the heat dissipation, and the heatsink above the power supply MOS and the edge of the motherboard are also designed with RGB lighting effects.
Memory supports up to 64G capacity, 4600+ (OC), and 4*SATA3.0 6.0Gb/s.
There is also an M.2 SSD mounting position on the back.
From left to right, hdMI interface and DP interface, 2*USB3.2 Gen1 interface, Clear CMOS button, 2*USB3.2 Gen2 interface (red), 1*USB3.2 Gen2 Type-C interface, Gigabit Ethernet port and 1*USB3.2 Gen1 interface, audio interface, the bezel reserved WiFi antenna slot, the location is between the network port and the audio interface.
Graphics
Friends choose Sapphire's newly listed ultra-platinum series RX 6750 XT graphics card, support PCIe 4.0, with 12GB of video memory, suitable for 2K resolution games, and most importantly, this is a wave of new models of graphics cards, you can be more assured to start, after all, the newly released graphics card has not been exercised, and the performance has been further improved.
Out of the box GIF first.
Sapphire RX6750XT Ultra Platinum graphics card is a non-public design, the appearance continues the design language of the Sapphire Ultra Platinum series, three fans design, length 310mm.
The Sapphire RX6750XT Ultra Platinum graphics card is powered by dual 8Pins, while the Sapphire logo is illuminated and displayed with a GIF on the back.
The all-metal backplate on the back is a traditional art, and the large area of the opening hole on the right side and the fully nickel-plated heat dissipation fin constitute a penetrating air duct, which is conducive to air penetration and heat dissipation, and improves the heat dissipation efficiency. In the right side of the logo cutout position can see a 5V ARGB synchronization pin, in addition to adjusting the graphics card lighting effect through Sapphire's own TriXX software, but also support the motherboard lighting effect synchronization, under the logo of RADEON on the left, there is a small logo of the BIOS Switch, the graphics card can switch between three different preset BIOS.
It has 3*DP 1.4 and 1*HDMI 2.1.
The fan supports intelligent precision control, which, combined with intelligent start-stop technology, can reduce fan noise while ensuring air volume.
hard disk
The choice is the X4-1T version of Yingchi Xingyao, a good entry-level PCIe4.0 hard disk, and the outer packaging is a blue tone of Yingchi's kanban lady - Xingyao Niang.
Yingchi Xingyao X4-1T comes with a thick aluminum heat sink designed with mirror bright silver highlight + bright silver color matching and multiple printing and silk process design, and the front of the heat sink has a star logo in the middle.
Unscrew the surrounding fixing screws, remove the heatsink, and reveal the real body of the hard disk, and the chip contact surface is equipped with high-specification thermal conductive adhesive to enhance heat dissipation. The main control model used by Yingchi Xingyao X4-1T is PS5019-E19T, the main control supports NVMe v1.4 and PCIe4.0×4, equipped with the 4th generation LDPC & RAID ECC error correction mechanism, improving data reliability and power failure protection mechanism, which can reduce the risk of data loss, and there are specific reads and writes and application tests behind it.
The thick aluminum heat sink is not a whole piece of unprocessed metal, but a penetrating skeleton duct design, which can effectively improve the heat dissipation effect.
power supply
The power supply selection is Yinxin's own rated 750W SX750-G, which is the SFX small power supply of 80 Plus Gold Medal.
Out of the box GIF first. Accessories include SFX to ATX adapter board and fixing screws, relatively soft flat wire design module cable, cables mainly have 24P, 1* single CPU 8Pin, 1* dual CPU 8Pin, 2* dual graphics card 8 Pin, 2 * 4SATA and 1 *3IDE.
92mm HYB bearing fan, low noise operation.
From the chrysanthemum position, you can see a large number of electrical components inside, the all-Japan capacitor and gold certification material are strong, and the 120mm*100mm*63.5mm body makes it suitable for most applications.
Fully modular design.
Cooling
The height limit of the radiator, just for the people's AXP120-X67 White ARGB listing, and the height limit of the CS351 chassis is directly installed just right, but friends have special requirements that is to replace the fan with a better B, after all, the CS351 does not see too many lighting effects.
Out of the box GIF first. AXP120-X67 body, various models of mounting fasteners and parts, ancestral TF7 silicone grease tube, the included backplane is to support Intel's latest 12 17XX mounting backplane with CPU.
And the previous installation of N1 friends radiator together, just a black and a white two versions, simply put together to shoot it, 123.5mm * 120mm * 52mm three circumference, plus 15mm TL-C12015 is only 67mm high, the height limit harsh ITX chassis can also be on.
The shape is quite similar to the AXP100RH, but many details have evolved, 6 AGHP Gen3 fully plated reflow soldering 6mm heat pipes, the position of the fixing screws, the SS2 clip and the cooling fan, etc., the installation convenience and effect are stronger than the predecessors.
The AXP120-X67 has a total of 45 0.4mm fully nickel plated pure aluminum heat dissipation fins, 6 more than the AXP100, and the pressure screws make installation more convenient, but the height is slightly increased.
Fully plated pure copper CNC base with protective sticker.
The included fan is TL-C12015B-S, the white band is TL-C12015W-S, the 15mm thin fan, the size is 120mm*120mm*15mm, the S-FDB bearing, the maximum speed is 1800±10% RPM, the fan noise ≤ 26.1 dBA, the maximum air volume is 59 CFM, and there are soft skin-like silicone shock absorber pads at all corners.
Chassis
Friend chose the chassis is CS351, it is obvious that he did not seriously read the product introduction, obviously support M-ATX motherboard, such a installation, wasted more than half of the hard disk bits, but he himself can see open, self-deprecating good did not buy ATX motherboard, hahaha.
The outer packaging is a very common environmentally friendly carton.
360° GIF to take one. Yinxin's CS351 is 411mm long, 265mm wide, 209mm high, 25.1L, and weighs 5kg, because it supports a graphics card with a length of 368mm, so the length has increased, but this also increases the space, can support the standard ATX power supply (within 160mm), and is easy to install equipment and strengthen heat dissipation (up to 82mm radiator support).
The most satisfactory part is that in addition to the 5 3.5-inch hot-swap hard disk bits that can be seen on the front, the CS351 also has 7*2.5-inch hard disks and 2*3.5-inch hard disks, so the CS351 can install 7*3.5-inch hard disks and 7*2.5-inch hard disks without modification, which is really very easy to install.
I/O is divided into two parts, the power switch and the restart key and the system and hard disk work lights together, the headset interface and two USB3.2 Gen1 Type-A interfaces and a USB3.2 Gen2 Type-C interface below.
Five 3.5-inch hot-swap hard disk slots, all with anti-theft locks, not only prevent, but also prevent many unexpected situations, but also designed with heat dissipation holes, convenient for the heat dissipation of the hard disk.
The hot-swappable drive tray can be swapped without powering off and supports transfer speeds up to SAS 12 Gbit/s or SATA 6 Gbt/s.
Each hot-swappable hard drive tray has two bags of screws to secure different hard drives, and the small details are well done.
The hot-swappable hard drive tray is used to further protect against dust, and a plastic baffle is also designed inside to prevent dust from entering when the hard disk is not installed.
Above the PCIe bit, two 80mm fans can be installed, but it should be noted that the vacant installation fan with an oblique angle may reach the graphics card, and can be selected according to actual needs.
The internal of the hot-swappable hard disk has been pre-installed with an 80mm cooling fan at the factory to assist the hard disk to dissipate heat.
Two 3.5-inch hard drives can also be installed under the hot-swappable hard drive bits.
If you do not install a long graphics card or a short card or a semi-high card within 249mm, the CS351 can install up to 7 2.5 hard disk slots without modification.
The bottom four corners are non-slip support feet.
The accessories are relatively simple, the hard disk is placed in the lock of two keys, a bag of fixing screws, and installation instructions.
Machine
The AXP120-X67 White ARGB down-voltage CPU heatsink is in place with no compatibility issues.
The Avenger RGB PRO SL is in place.
Friends in order to better cooling effect, so in the installation of the cooling fan replaced by Limin's TL-B12, I would suggest that he add an 80mm and three 40mm cooling fans, but there is no current hand, or wait for the opportunity later.
Sapphire RX6750XT Ultra Platinum graphics card is in place, no power and no lighting effect.
Power on once, first come to a host work photo.
Sapphire RX6750XT Ultra Platinum Graphics card has good lighting effects~
Test
Sapphire RX6750XT Ultra Platinum Graphics Card Take a look at GPU-Z, the overall parameters are stronger than the 6700XT.
3DMARK Time Spy test, score 13233, graphics card score 13733, CPU score 10970.
3DMARK Time Spy Extreme test, score 6160, graphics card score 6377, CPU score 5166.
3DMARK Fire Strike test, score 31245, graphics score 38469, physics score 28055, composite score 13964.
3DMARK Fire Strike Extreme test, score 17433, graphics score 18505, physics score 28610, composite score 8629.
3DMARK Fire Strike Ultra test, score 9067, graphics score 9086, physics score 28571, composite score 4447.
I was able to run THE ROYAL and ran down with a score of 6371.
3DMARK CPU PROFILE test.
Odyssey for equality of all living beings, 2K resolution, extremely high picture quality, average frame rate of 76.
Far Cry 5,2K resolution, extremely high picture quality, average frame rate 126.
Tomb Raider: Shadow, 2K resolution, set as above, average frame rate 74.
Red Dead Redemption 2,2K resolution, set as above, average frame count 59.9512.
Cyberpunk 2077, 2K resolution, choose fast preset scheme high, specific later friends themselves fine tuning, to this as the benchmark should be almost the same.
The frame rate of each scene is basically around 65-80 frames, which can be played smoothly.
Eat chicken 2K resolution, the overall image settings as above, the frame rate floats at 105 frames -120 frames.
CS351 In the absence of other auxiliary cooling installation, AXP120-X67 voltage 5800X, room temperature 25 °C, default settings are not overclocked, single baked FPU ran for 13 minutes temperature stability, full core 4.14 Ghz, CPU temperature 90.3 °C, CPU core 89.5 °C, CPU package 90 °C. Visually this 5800X physique may be average, the heat problem is more serious, if you change 5700X, it should be better.
Also no other auxiliary heat dissipation is installed, the AXP120-X67 fan is replaced by TL-B12, room temperature is 25 °C, the default setting is not overclocked, the single-baked FPU runs for 13 minutes and the temperature is stable, the full core is 4.2Ghz, the CPU temperature is 90.3 °C, the CPU core is 89.5 °C, and the CPU package is 90 °C.
This is still a stress test in the case of no hard disk installed, so friends must pay attention to the positioning and design when choosing the chassis, from the design and overall positioning of the CS351 is a good chassis, but in the case of not installing other auxiliary cooling fans I do not recommend too strong U, or transform the split water, but a NAS system or download machine actually need to pay more attention to the power consumption, so still pay attention to the power consumption of the CHOICE CPU.
Friends agreed to have the opportunity to change the configuration again, but judging from his eagerness to play home, coupled with sapphire's ultra-platinum B550i+RX6750XT super platinum graphics card combination, this opportunity may have to wait a while.
The above is a yin and yang installation - 5800X + sapphire B550i + RX6750XT ultra-platinum graphics card + Yinxin CS351 chassis installation record of the whole content, the end of the work ~