Friends who have watched the anime are likely to have such an impression, the main plot of "Mobile Suit Gundam" broadcast in 1980 revolves around the RX78-2 Ancestor Gundam piloted by Amro, riding a battleship white Trojan all the way to fight monsters and upgrades. As a "strange" Gion body can be described as strange and strange, and the body of the Federation side has basically become a Meal pairing for Gundam.
The HGUC021 ancestor and the HGUC050G fighter have been introduced before, and today the "green leaves" that match them are displayed intensively, and I don't know if I can let everyone find a little initial touch.
The war in the Gundam UC universe was fought in the context of minovsky particles that rendered radar systems ineffective. Traditional weapons that need to be aimed and positioned and then fired at a distance have lost their original power, and the MS era of good mobility and flexible melee combat in the land-air universe has arrived. In the armaments upgrade, the small and advanced Principality of Gion took the lead in putting the MS into actual combat. And seize this time difference in the iteration of armaments, launch a large-scale surprise attack, crash the colonial satellites into the earth, and overwhelm the Federation, whose comprehensive national strength is several times that of its own. Some people say that Gion is very similar to Nazi Germany, some people say that Zagu is a Zero fighter, Zagu II is a Zero fighter, maybe a little bit, in short, the scrappy advanced small countries of the era have started a war against the old order.
At this time, time has become the key, as long as it can not be quickly destroyed, the Federation, which is far superior in manpower, materials and production capacity, can alleviate this breath and drag it down, it can stabilize the situation, and eventually evolve into a war of attrition that is beneficial to itself.
In an emergency, the Federation modified the operational space capsule "SP-W03" to load a 120mm low-recoil cannon and became an RB-79 iron ball, with a small team of 6 machines and hundreds of thousands. To put it more tragically, they form a line of war that cannot be said to be a line of war, but more like a cannon fodder buffer belt.
After the animation was broadcast in the same year, the peripheral model was introduced
300 yen, including 1/144 and 1/250 iron balls
The plates are pure gray blue
The two are not much different except in size
The small forearms are not movable, the large ones are movable
This is one of the most restorative models in the 1980 Gundam assembly, and it is not completely outdated today
In September 2010, Bandai launched HGUC 114,300 yen
There are two complete plates, that is, there are two sets for each weapon
There is a cockpit, but no driver
There is no complementary color sticker, the color restoration depends on the sub-pieces, and the performance of the prime group is good
The front window is greenish transparent
The old version is slightly larger and the colors are closer to the animation. The HG version is more realistic and more detailed
Later in the Year's War, the GM's general-purpose mass-produced MS RGM-79 was mass-produced and put into combat. In order to save costs and speed up the construction period, Jim removed the complex core fighter mechanism, the armor was invaluable, and the performance and "RX-78 Gundam" were far apart. The 42 airframes produced in the early stage were frequently faulted, and the 288 aircraft produced in the later series improved slightly. The advantage is that it inherits the actual combat data of the RX-78, and even inexperienced drivers can effectively control it.
It is equipped with a beam sword, two 60mm Vulcan cannons, a beam spray gun, a special shield and a 90mm machine gun. 2 iron balls with 3 Jim to form a squad, or 36 Jim squadrons with 10-20 iron balls mixed, Jim melee iron balls long range, finally can fight with Zagu in space.
HGUC020 Jim 021 Tuple released a month ago, the shape and structure are very similar. Since there is no core fighter and transparent beam sword, the price is only 700 yen
The outer nails are bluish white, and the shape is restored animation, which is close to MG2.0
After painting
Many places need to be colored, and the neck, waist, and entire lower limbs are not very comfortable
The green transparent pieces of the eyes are the highlights
The beam sword is a solid blue-white plastic piece, and it is recommended to use gundam instead
The RX-75 Guntank was developed in the Earth Federation Army's "RX Program" with the RX-78-2 Gundam and other airframes for long-range artillery support MS, originally seven were built, but due to Xiaya's surprise attack on the Side 7, only one of the aircraft was left, and then moved into the white Trojan horse, piloted by Kobayashi Hayato, as a fire support airframe, became one of the important combat forces of the protagonist regiment.
The armor used is the same as that of the Gundam, which is also Luna titanium alloy, and also uses the same nuclear fighter structure. Each shoulder of the fuselage was equipped with a 120 mm low recoil gunpowder cannon, and each wrist was equipped with a 40 mm4 company grenade launcher.
However, although it performed well as a support aircraft in actual combat, it was not maneuverable in the universe, and more importantly, the design of the long-range support of the machine was superfluous compared with the long-range naval guns. At the same time, after the One Year War, the Federation Army no longer developed a new type of land-specific MS, so the successor to the steel tank series was quite small, and gradually withdrew from the historical stage.
In January 2000, Bandai launched HGUC007,800 yen
The following is the V Combat Suit Edition
There is no need to complement the color, and the completion of the prime group is very high
The tracks are immobile, and the waist and head are limitedly movable
On the left is the single box version, which is darker in blue and closer to the iron color in gray, while the set version has stickers, which are more colorful in blue and greenish in gray
The RX-77- Guncannon is a medium-range support MS with two 240mm cannons whose main armament is considerable but whose recoil is just as impressive. Coupled with the high center of gravity, the two guns may cause the fuselage to overturn when fired in unison. At the same time, because the design concept of this machine is support MS, the melee ability is weak, so it is not equipped with any effective melee weapons, so it is necessary to improve the defense to prevent it from being easily broken by the enemy during melee combat. Combining the above two aspects, this machine uses thickened luna titanium alloy as armor, so that its defense power is higher than that of the Gundam, especially the armor of the calf, so that the center of gravity is shifted down and the recoil is overcome. In ground combat, steel cannons often lie down and shoot, which in addition to making the shooting more stable, can also use irregular terrain for concealment.
However, the heavy armor also caused the steel cannon to be less flexible than the Gundam. In order not to further increase the weight, the steel cannon was not equipped with a shield, but relied only on the thick armor of the body to resist the enemy's attack.
In addition to the 240mm cannon, the steel cannon can also be equipped with two 10-piece missile launch nests, and the instantaneous firepower is much stronger than the 240mm gun, but the fire durability is lower than that of the 240mm gun.
In addition to the medium-range suppression of firearms, steel cannon is also equipped with XBR-L type medium-range sniper beam rifle, compared to the XBR-M type rifle accuracy, range are improved, the maximum range in the vacuum of 30KM, it can be said that steel cannon has a basic sniper combat capability, but steel cannon series only 2 type is equipped with this high-precision long-range beam rifle that can be used for sniping.
In terms of close-range defensive weapons, only the 60mm Vulcan cannon and grenades on the head are used, and there is no beam sword.
A total of 3 steel cannons were developed, and they were scheduled to be equipped with white Trojans after the final test, but only one machine survived after the Side 7 was raided by Xiaya, and was driven by Kai, which is also one of the important combat forces of the protagonist regiment. Often when the Gundam deals with a strong enemy, he takes on the responsibility of the last door god of the Trojan horse together with the steel tank. However, in the end, the aircraft was also destroyed in the fortress of A.Bawa Ku, but fortunately the pilots returned.
In May 1999, Bandai launched the HGUC series. As the first work, steel cannons carry a lot. Small scale, cheap, easy to assemble, high reduction, resistant to play, good color separation, taking into account the dual attributes of toys and models.
The goggles need to be colored with stickers, which is a pity, and the color separation in other places is not bad
The movement of the limbs is not bad, and the neck and waist are not satisfactory
Specialized styling hands need to be replaced to achieve climbing position
The left is a single box version, the main color is more apricot red, the set version is redder, and the gray is more blue
In June 2015, the HGUC series began a new journey, and the HGUC190 steel cannon was the first cannon, blowing up the door to a new era
In terms of shape, it belongs to the fashionable figure with a small head, thin waist and long legs
The movability of the waist has been strengthened compared to the previous work, and the other parts have also been significantly improved
As a model priced at only 800 yen, the sale of Xinsheng Steel Cannon refreshed my understanding of this price point of Steel Pula. In this era when most people can afford RG, MG and even finished models, it is not easy for HG assembly series to win a place for themselves not only by low prices, but also by some unpopular themes.
The old version is more animated, the new version is more fashionable
Time and space flow, and what remains unchanged is the initial touch
I saw that some friends said that they were used to playing MG, and they were a little unaccustomed to HG. There are also people who like the new and dislike the old, and don't like the old model. Maybe everyone's feelings are different, I have played with all the series of steel Puras of all ages, each with its own different experience, and I enjoy every experience. My aim is not to make a model as quickly and economically as possible, but to play. Checking the information is to play, repairing the piece is to play, assembling is to play, and doing the effect is to play. The model is good or bad, the painting is good or bad, important is not important. Hold them in your hands and look in your eyes, they are real, just as true as in the animation.